Menu Icon

Buy a Trifecta 2.0 and get FREE eLight or 40 Dollars with Mail In Rebate

Dodge Dakota Tonneau Cover

Select Dodge Dakota Year

  
Tonneau Cover


Available Years for Dodge Dakota Tonneau Cover


Tonneau Covers

Protect your gear and improve your truck's gas mileage with a custom-fit fold up, roll up, retractable or hatch style tonneau cover by Extang, Access, Truxedo, BAK Industries, Tonno Pro, Retrax or Craftec. These covers protect your truck bed from road debris and the elements while increasing towing performance and aerodynamics. Most covers provide a simple no-drill application which makes it easy to increase the appearance and functionality of your vehicle, and all tonneau covers offer either a fold-up, roll-up, retractable or easy removal design to allow you to adjust for any of your hauling needs.

Many fits and profiles are available for many of the most popular trucks such as Ford, Dodge, Chevy, and GMC. Find the custom-fit tonneau cover for your truck by entering the year on the left.




Truck Bed Tonneau Covers

Enter the year, make and model of your truck above to find custom a fit tonneau cover. We offer tonneaus for all types of trucks including Ford, Dodge, Chevy, GMC, Honda, Toyota, Nissan and Mazda. They are available from the highest quality manufacturers, such as extang, BAK, Access, Truxedo, Bestop and Craftec.


Tonneau Cover Accessories



Tonneau Cover Manufacturers



You may also be interested in...



Dodge Dakota Tonneau Covers Videos

TruXedo TruXport Tonneau Cover Installation - 2004 Dodge Dakota

Today on our 2004 Dodge Dakota, we'll be installing part number TX262101 the truck's port tonneau cover from Truxedo. We'll take the two siderails and we'll need to apply the weather seal here on the corner plug, here at the front corner. After doing that, we'll set them in the place on the bedside, where we can then attach our front cover assembly. You wanna make sure that the corner plug slides into the cover assembly like so. We'll now put the clamps loosely over our rail. You'll notice the clamps have teeth.



Craftec Vinyl Tonneau Cover for Short-Bed Pickups Review

Today we are going to install part number 352730SC from Craftec. What this is, is a vinyl tonneau cover, and we are going to install this on a 2007 Dodge Dakota short-bed pickup. There are a lot of components to this install, but it is not too bad if you break it down into simple little sub-assemblies, as the instructions describe. We will cover some of the parts first to give you an idea of what is going on. First off, we have got these corner pieces here. These corner pieces cover the actual metal corners on the tonneau cover frame itself. We have hardware that threads into the aluminum pieces that actually make their own threads as they go in. We have our latch assemblies right here these work inside the tonneau cover. When you close it and you twist it, it catches underneath the edge of the bed itself. A pull strap to pull it down when the cover is above your head. And these are the clamps that go into the frame and on the bed that your gas shocks mount into. And these are attaching points that go into the track into the frame. You have got the bows to go into that create the bow effect on your tonneau cover, and the the bows are located right here. These are the rails themselves. These are the parts that go longways on the truck, and this part and this part are the ones that go across the truck. Some bed lengths require an extension. In this situation, the bed is so short you do not even have to worry about that. These are the metal corner pieces right here that actually get the frame bolted together and locked into place. And these little angle brackets here will eventually hold the hinge part of the tonneau cover, and also one-half of that will get clamped into place onto the bed itself. Lastly, we have the tonneau cover itself. One good tip about this is if you keep it warm overnight so it stays nice and pliable, that makes it a lot easier to work with.





Dodge Dakota Tonneau Covers Questions and Answers


  • Will Truxedo Tonneau Cover # TX250901 Fit 2007 Dodge Dakota Quad Cab
  • The Truxedo Tonneau Cover # TX250901 that you referenced will fit 5-foot-bed Dakota model years 2008 through 2011 that are fitted with the Trac System. It is not a fit for the 2007 model year; I confirmed this with Truxedo. If your 2007 Quad Cab is a 5-foot bed, then you can use any of several Truxedo covers. If you prefer a low-profile folding cover that sits inside the bed rails you can use # TX790101. If you prefer a roll-up cover that sits on the bed rails you can use # TX290101....
    view full answer...

  • If Tailgate of Truck is Locked with Tonno Pro Cover # TPHF-253 installed is the Cover Locked Too
  • If you had the Tonno Pro part # TPHF-253 installed on your truck and the tailgate was locked the tonneau cover would be locked as well as you need to have the tailgate open to be able to access the latching mechanism.
    view full answer...

  • How Far Does Truxedo Deuce 2 Tonneau Cover Roll Up
  • I attached a review video for a similar Truxedo Deuce 2 plus a picture I took from the video to show just how far the tonneau cover can roll up. It basically rolls all the way up to the back of the cab.
    view full answer...

  • Replacement Tarp for Extang BlackMax on 2006 Dodge Dakota
  • There is a replacement tarp available if you have the Extang BlackMax Soft Tonneau Cover # EX2765 for a 5 foot bed, the Replacement Tarp # EX1765. This is a direct replacement for your original vinyl cover and will work with your original BlackMax hardware and bows when installing.
    view full answer...

  • Replacement Extang Tarp for 2005 Dodge Dakota with Extang BlackMax Tonneau
  • The Extang BlackMax tonneau you have is the part # EX2760 on your 2005 Dodge Dakota with a 6-1/2 foot bed. That means the correct tarp replacement would be the part # EX1760.
    view full answer...

  • Recommendation for TruXedo Tonneau Cover on a 2004 Dodge Dakota Quad Cab
  • The TruXedo line of tonneau covers for your 2004 Dodge Dakota Quad Cab is the TruXedo Deuce, part # TX790101, the Lo Pro QT, part # TX590101, the Edge, part # TX890101, and the TruXport, part # TX 290101. The TruXport that you have referenced is the most economical of all four of the covers. It has a pre-set tension control so you will not be able to adjust the tension of the tonneau cover on your truck. The tension control is what keeps the cover taut on your truck bed. It has a 5-year...
    view full answer...

  • Which Vehicles Does Craftec # 35270 Tonneau Cover Fit
  • The Craftec # 352730 Tonneau Cover you referred to fits the following vehicles: 2000 - 2007 Dodge Dakota 5 Foot Bed 2006 - 2009 Mitsubishi Raider 5 Foot Bed You can see a product demonstration video by clicking the provided link.
    view full answer...

  • Comparing the BAKFlip FiberMax and G2 Hard Tonneau Covers
  • The main difference between the BAKFlip FiberMax Tonneau Cover, # BAK126206, and the BAKFlip G2 Tonneau Cover, # BAK26206. is that the FiberMax uses insulated panels with a fiberglass-reinforced polymer top and aluminum undersides. The G2 uses all-aluminum insulated panels. Both tonneau covers are tri-fold covers that have super low profiles, dual latches and fit inside the bed rails. I have attached the installation instructions and an installation video for you to check out.
    view full answer...

  • Bestop EZ Fold Folding Tonneau Cover for a 2001 Dodge Dakota Quad Cab Short Bed
  • We do have a Bestop EZ Fold Folding tonneau cover for your 2001 Dodge Dakota Quad Cab Short Bed, but the tonneau cover that you referenced will only fit the models with the 6-1/2 ft bed. For your truck, you will want to take a look at the EZ Fold Tonneau Cover, # B1606201. This cover was designed to fit the 2001 Dodge Dakota with the 5 ft bed. This tonneau cover is very easy to install and will work great with your truck. I have attached the installation instructions for you to...
    view full answer...

  • How Weather-Resistant Is Craftec Hatch-Style Tonneau Cover
  • The Craftec Hatch-Style Tonneau Cover, part # 352128 is a one-piece lightweight tonneau cover, and has two hidden latches at the rear so you will not have a problem with it flapping in the wind when installed on your 2000 Dakota. The tonneau cover also has a dense foam weatherstrip attached to the bottom of the cover to help keep water out and also help protect the paint finish on your truck. I recommend making sure you keep the weatherstrip cleaned and possibly use something like Armor...
    view full answer...

  • Tonneau Cover for a 1997 Dodge Dakota with 8 Foot Bed
  • We have several tonneau cover options available for your 1997 Dodge Dakota with an 8 foot bed. I have included a link to the right to all of the options. If you like the Craftec cover the correct one for your truck is # 352228.
    view full answer...

  • Craftec Tonneau Cover for a 1995 Dodge Dakota
  • Craftec tonneau cover # 352116 is designed to fit the 1995 Dodge Dakota with a 6-1/2 foot bed. For the 8 foot bed you would use # 352216. The part numbers are very close. I will make sure that we have it correct on our site.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.