Menu Icon
fall hauling headquarters

Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

Thanks for the great service. The order arrived at my doorstep yesterday afternoon. Thank you for making sure the order was complete. I installed the hitch and wire kit last night with no problems. The instructions were perfect. Bruce

Bruce

Maplewood, MN

Free Set of Yakima JetStream LoadBars via Mail In Rebate with Purchace of Any Retrax XR Series Cover

Retrax






Expert Answers about Retrax

  • Replacement Locking Cores for Retrax Tonneau Covers
  • I spoke to my contact at Retrax and he informed me that the serial number you provided refers to a Retrax Hard Tonneau Cover made in 2009. The keys Retrax used before 2010 are not replaceable. Instead you would need to replace the locking core. In order to replace the locking core on the RetraxPRO MX Hard Tonneau Cover you would want to use part # RTF05-1014 and part # RTF05-1013 for the RetraxONE MX Hard Tonneau Cover. If you're not sure whether you have the ONE or Pro you can look at...
    view full answer...

  • Replacement Keys for Retrax Hard Tonneau Covers
  • I spoke to my contact at Retrax and they informed me that the locking core you have "RS129" is an older core than was made before 2009 which they no longer make replacement keys for. Therefore, the only option I have for you would be to replace the locking cores. In order to replace the locking core on the RetraxPRO MX Hard Tonneau Cover you would want to use part # RTF05-1014 and part # RTF05-1013 for the RetraxONE MX Hard Tonneau Cover. If you're not sure whether you have the ONE...
    view full answer...

  • Retractable Tonneau Cover and Tool Box Recommendation for 2016 Ram 3500 8 Foot Bed
  • To do a retractable tonneau cover for your 2016 RAM 3500 and use a tool box will require you do go with a box that will fit underneath the tonneau. The RetraxPRO part # RT80233 would be the cover that would work best for you as it is a fit for your truck and will retract far enough to fit a chest tool box. This has a matte black finish. For a glossy finish you would want the # RT40233 instead. The DeeZee Red Label Truck Bed Toolbox # DZ8537 would then fit under the cover and would...
    view full answer...

  • Will TracRac Sliding Ladder Rack Fit with Retrax Tonneau Cover on a 2016 Ford F-150 5-1/2 Foot Bed
  • We haven't any pictures but there is enough adjustability in terms of where the rails for the ladder rack # TH43002XT-508 sit on the tops of the bed sides to work with the Retrax Tonneau cover # RT80370 on your 2016 Ford F-150. The most likely point of contact between these two parts is at the back of the bed because the bed is not perfectly straight; it tapers some. That is where the rails for the ladder rack would have to be angled out some to compensate.
    view full answer...

  • Replacement Retrax One Lock Core and Keys
  • Retrax doesn't do replacement keys, but we do have the replacement core with keys available. I recommend the Replacement Locking Core with Keys for RetraxONE Tonneau Cover # RTF05-1013. You will need to enter the serial number in the box. I spoke with my contact at Retrax and they said those two numbers are for a really old cover, so unless you have used it on multiple vehicles is most likely not the correct number. I've attached a photo to assist. The serial number is to help them...
    view full answer...

  • Replacement Keys for Retrax Tonneau Cover
  • It sounds like you need replacements for a RetraxPRO tonneau cover and for that you need Replacement Locking Core with Keys for RetraxPRO Tonneau Covers # RTF05-1014. On the product page you will need to enter the serial number of your tonneau to get the correct replacement. If your cover was a RetraxONE tonneau the correct locking core with keys is part # RTF05-1013.
    view full answer...

  • Is RetraxOne MX Tonneau Cover Compatible With TracRac SR on 2011 Toyota Tundra With 6-1/2 Foot Bed?
  • There is going to be a Retrax tonneau cover that allows you to use your new TracRac SR TA21610-02-02. The RetraxOne MX # RT60836 is designed with stake pocket cutouts so you can use your ladder rack with this retractable tonneau cover on your 2011 Toyota Tundra. The RetraxOne MX # RT60836 is a confirmed fit for the 6-1/2 foot bed on your Tundra and you can see exactly how it installs in the directions I've linked for you. I also added a link to a video review of this cover for you to...
    view full answer...

  • Dimensions Of Canister On RetraxPro MX For 2017 Ford F-350 Short Bed
  • The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80383 will have a measurement of 11-5/8 deep by 13-3/4 inches long by 63 inches wide. I reached out to the manufacturer to confirm these dimensions and created a photo to assist. This type of a cover will work extremely well with a tool box that opens from the front like the DeeZee Specialty Series Underbody Toolbox - Steel - 9 Cu Ft - Black # DZDB-2602 or the DeeZee Specialty Series Underbody Toolbox - Brite-Tread...
    view full answer...

  • Inexpensive Hard Tonneau Cover for a 2017 Chevy Colorado with 6 Foot Bed
  • The most cost effective hard Tonneau cover for your 2017 Chevy Colorado with 6 foot bed is the Tonno Pro Hard Fold Hard Tonneau Cover, # TPHF-165. It is made of both aluminum and vinyl. So it looks like a soft cover but is a hard cover underneath the vinyl layer. If you don't want the vinyl, soft look at all I recommend the BAKFlip G2, # BAK26125. It is all aluminum.
    view full answer...

  • Replacement Locking Core for Retrax Hard Tonneau Covers
  • In order to replace the locking core on the RetraxPRO MX Hard Tonneau Cover you would want to use part # RTF05-1014. In order to replace the locking core on the RetraxONE MX Hard Tonneau Cover you would want to use part # RTF05-1013. If you're not sure whether you have the ONE or Pro you can look at the center sections of the tonneau cover. If the center slots are 1" wide then you have the ONE and if the center slots are 3" wide then you have the PRO. To change the locking core all...
    view full answer...

  • Determining if RetraxPRO Tonneau Cover will Close Over 5th Wheel Hitch on 2018 Ford F-350
  • The RetraxPRO Hard Tonneau Cover # RT40386 referenced in your question is confirmed to fit your 2018 Ford F-350 if it has the 6-3/4 foot bed. This retractable aluminum cover will install on the top of your bed rails and features stake pocket cutouts. In order to see if this will close over your fifth wheel hitch, you will just need to check whether the hitch head or release handle sit above the height of your truck rails. If they sit below the height of the rails, this cover will fit and...
    view full answer...

  • Are RetraxONE MX Tonneau Covers Waterproof
  • The RetraxONE MX Hard Tonneau Cover # RT60362 is designed to direct all water and rain through it's drain system so that the truck bed is kept as dry as possible. Would it keep the truck bed totally dry if left out in a very hard rain though? Realistically not. If the rain is light the truck bed contents will remain dry but if the rain is hard there will be some moisture let in. A lot of the reviews online for this cover state that they would call it "almost waterproof" which is really...
    view full answer...

  • Replacement Lock Core and Keys Needed for a Retrax Tonneau Cover
  • We do have a replacement locking core with keys for both the RetraxPRO and the RetraxONE tonneau covers. If you have the PRO use part # RTF05-1014 and if you have the ONE use part # RTF05-1013. You will need to locate your serial number and enter it into the box on the product page.
    view full answer...

  • RamBox Functionality With RetraxPro MX Hard Tonneau Cover Installed On 2015 Ram 1500 6 Foot Bed
  • The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80235 is a confirmed fit for your 2015 Ram 1500 with 6 foot bed and RamBox. Neither of the videos which I've attached for convenience are installations on a truck with RamBox but you can see the similar installation. I reached out to my contact at Retrax and they confirmed the fit for your truck and said that the rails will still allow you to use your RamBox without issue. You will have their full opening functionality....
    view full answer...

  • Retractable Tonneau Recommendation for 2016 Chevy Silverado 2500 Short Bed with TracRac Ladder Rack
  • If the TracRac ladder rack you have is one that attaches through the top of the stake pockets and does not wrap around the bed rail to clamp in place it would maybe would work with the Retrax Tonneau part # RT40466 that you also referenced with modification, but since the rails of the cover go over the bed rails and somewhat cover the stake pockets it wouldn't be an ideal fit. Your best solution would be the part # BAK26121 which would work easily with the TracRac.
    view full answer...

  • How Big are the Canisters for Retrax Powered Tonneau Covers for a 2017 Toyota Tundra 5-1/2 Foot Bed
  • For your 2017 Toyota Tundra the PowertraxPRO Hard Tonneau Cover Lexan # RT20841 and the aluminum version # RT50841 are identical except for the materials used to make the covers so the canisters are the same for both. The canisters are slightly less than the width of the inside of the bed. They stick down into the bed about 1 foot from the tops of the bed sides. And they stick out into the bed by a little less than 1 foot from the front of the bed.
    view full answer...

  • Comparing RetraxPro MX Hard Tonneau Covers with Aluminum Construction and Matte Black Finish
  • The 5 foot 8 inch bed of the 2018 Chevy Silverado 1500 is referenced as a 5-1/2 foot bed. The manufacturer just rounds the numbers for parts like a tonneau cover, but the covers will be tested to confirm a fit, so they have been tested to fit your truck. The difference between the RetraxPro MX Stake Pocket # RT80460 and the RetraxPro MX Wide Rail # RT80471 is only in the style of the rails. The wide rail kit completely covers the stake pocket holes for a clean look that also keeps...
    view full answer...

  • Does RetraxONE Hard Tonneau Cover # RT10235 Fit 2016 Ram 2500 with Ram Box
  • Yes, the RetraxONE Hard Tonneau Cover # RT10235 that you referenced will fit your 2016 Ram 6 foot bed with the Ramboxes as that is what is specifically designed to fit.
    view full answer...

  • Hard Retractable Tonneau Cover for a 2018 Ram 2500 Short Bed with Ram Boxes
  • We do have Tonneau covers for your 2018 Ram 2500 short bed with Ram Boxes. For a hard, retractable cover that will fit I recommend the RetraxONE # RT60235. This is a manually operated cover with the popular matte finish that is not only going to look good but protect the bed contents as well. I have linked a video review of this cover for you.
    view full answer...

  • Security for RetraxONE MX Hard Tonneau Cover RT60232 on 2015 Ram 1500
  • It's smart to look into the security of a tonneau cover; what I can tell you is that when locked, the RetraxONE MX Hard Tonneau Cover # RT60232 will be secure if it is extended to your 2015 Ram 1500's tailgate. If slightly open, it's likely possible the friction lock can be pulled open, but it would not be like sliding it open when the cover is unlocked. As you mentioned, however, any tonneau cover can be broken into because they are not meant to act as security systems. That said,...
    view full answer...

  • Noise Level of RetraxPRO MX Hard Tonneau Cover on 2017 Chevy Silverado 1500
  • The RetraxPRO MX Hard Tonneau Cover # RT80460 referenced in your question is confirmed to fit your 2017 Chevrolet Silverado 1500 with a 5-1/2 foot bed. The flush front cover will provide an extremely low profile design that will result in very little noise while in either the retracted or extended position. This is an extremely durable tonneau cover that can supported distributed loads of up to 500 pounds. The design will also help improve aerodynamics which will in turn boost your fuel...
    view full answer...

  • Best Locking Tonneau Cover for 2017 Honda Ridgeline
  • The best locking tonneau cover for your 2017 Honda Ridgeline is the RetraxPRO MX Hard Tonneau Cover which is available in either Matte Black # RT80502 or Glossy Black # RT40502. This is a retractable cover made from industrial strength aluminum which is key-lockable at any position. This cover is a simple clamp-on installation that will not require any maintenance, is made in the USA and comes with a lifetime warranty. I've added a link to a video review of this cover foryou to take a look...
    view full answer...

  • Difference Between RetraxPRO MX Tonneau Covers With and Without Wide Rails
  • The only difference between the RetraxPRO MX Hard Tonneau Cover # RT80462 and the RetraxPRO MX Hard Tonneau Cover - Wide Rails # RT80472 is that 80472 that has an extra piece that goes over the bed rails of your truck (these tonneaus fit certain years and models of 2014 - 2019 GMC Sierra and Chevy Silverado). I have added a pair of photos for you which show the differences between how the two look when installed.
    view full answer...

  • Will Retrax Tonneau for 2014 Ford F-150 Fit a 2015 Ford F-150
  • The Retrax tonneau covers for the 2014 Ford F-150, like the RetraxONE MX # RT60371, are not the same covers for a 2015. The same cover for a 2015 is # RT60373.
    view full answer...

  • Recommended Tonneau Cover And Ladder Rack For 2017 F150 With 6-1/2 Ft Bed
  • We do offer a ladder rack that will work with a tonneau cover for your 2017 F-150, but none of the ladder racks we carry are compatible with the BakFlip tonneau cover. I recommend the Extang Revolution Soft Tonneau Cover # EX54480. This cover has built-in bows that automatically latch to secure the cover. The ladder rack we offer that will work with the Tonneau cover is the TracRac SR Sliding Truck Bed Ladder Rack, part # TH43002XT-5012. This ladder rack slides in the T-track base...
    view full answer...

  • Hard Retractable Tonneau Cover Compatibility with Auxiliary Fuel Tank
  • The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80233 can absolutely install over an auxiliary fuel tank. You will just need to account for the header of the unit and the height or location of your auxiliary tank or transfer tank. For instance the DeeZee Truck Bed Auxiliary Tank - 38 Gallon # DZ91752X has a height of 19 inches and with the fuel cap 22-1/2 inches. You would need your bed rails and tonneau cover to not only exceed that height but also allow that...
    view full answer...

  • Will RetraxPRO MX Hard Tonneau Cover Work with TracRac SR Sliding Ladder Rack on a 2015 Ford F-250
  • The RetraxPRO MX Hard Tonneau Cover # RT80366 covers the bed side tops which is not compatible with the TracRac SR Sliding Truck Bed Ladder Rack TA21510-03. The rails that the ladder rack slides on need direct contact with the tops of the bed sides. For a hard retractable cover your best bet is the Pace Edwards SwitchBlade # 311-SMF6985. In only slightly covers the tops of the bed sides and since the rails for the ladder rack has curved edges they won't have to rest on the Tonneau cover....
    view full answer...

  • Does the RetraxPRO MX Hard Tonneau Cover the Stake Pockets on a 2018 Ford F-150
  • There is actually a version of the RetraxPRO MX Hard Tonneau Cover that has notches in the rails that will allow for full access to the stake pocket openings on your 2018 Ford F-150. For this you will want to use part # RT80370 for the 5-1/2' bed or part # RT80377 for the 6-1/2' bed. The 8' bed version however does cover the stake pocket holes when using part # RT80375. I have attached a few photos to show the stake pocket cut outs for you as well.
    view full answer...

  • Bed Tonneau Cover for 2014 Ram 2500 With 6-1/2 Bed and Gooseneck Hitch
  • Thanks for the thoughtful question and I'll address those concerns to find the best option. Since you did mention you need the tonneau cover to open enough to use your gooseneck hitch and also needed security you will need to go with a retractable tonneau cover on your 2014 Ram 2500 because a folding or soft cover simply is not going to give you both of those necessities or be as durable as the higher-quality retractable covers. Since all retractable tonneaus will leave the back...
    view full answer...

  • Comparing Retrax Powered Retractable Tonneau Covers for a 2017 Ram 2500 Short Bed with Ram Box
  • The only difference between Retrax powered retractable Tonneau covers # RT90235 and # RT50235 is the appearance. Cover # RT90235 has a matte finish so it is not shiny. Cover # RT50235 has a glossy finish so it is a bit shiny. Otherwise the covers are the same with the same features and operation: Industrial strength aluminum construction Tough matte finish to deter scratching Opens and closes with remote keyfob Front cover remains flush with rolling cover for low profile...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.