Shannon, I wouldn’t recommend that. This #MR72ZV bracket isn’t bolted through the frame, it’s just held in place by the weight of the bracket. A 1/2" set screw can be added if wanting a more secure fit. It works great for storing your spring…
Jeff, it’s more solid than you’d expect for a no-drill bracket. The #MR72ZV is sturdy and has a bit of weight, especially once the weight distribution hitch and bars are added. Nobody will be lifting that off the trailer's frame all in one go. If…
That’s one of the big advantages of the MORryde WDH Storage Bracket #MR62ZV - you can leave it mounted while you’re on the road. It bolts permanently to the A-frame and won’t interfere with your hitch. Just remove the bars and shank and install on…
Hey Michael, Adding to or enhancing your suspension would help with body roll and side-to-side movement. When it comes to anti-sway bars you'll want to go with whichever is the thickest. The Hellwig #HE74GR is 7/8" thick so you can measure…
Hey Jonathan, I hope MORryde comes up with a 2-1/2 inch hitch version of the WD storage bracket part #MR72ZV that you referenced but it only will fit the shank of a 2 inch system.
Hello Chris, Great question, in fact it was such a great question that I needed to reach out to my contact at SnapPad because I could not find that information anywhere. He stated that the SnapJack SJ RV Scissor Jack Pads - Qty 4 #SN32FR will work…
Hi Jason; it looks like your 2022 Yukon towing capacity is 7,500-7,900 lbs so I'm not surprised you're getting that rear sag. The best solution is going to be a weight distribution hitch. This will keep you level and also help reduce trailer…
Yes, the LED Light Kit for Draw-Tite, Tow Ready, Pro Series, and Rola Railed Cargo Carriers Item #98174LED is perfectly compatible with the 24x60 Reese Cargo Carrier for 2 Hitches - Steel - 500 lbs Item #63153 that you are planning on getting so this…
The center of the axles will sit 6-1/2" below the frame when mounted on the Timbren Silent Ride Suspension for Tandem Axle Trailers item #TSR7000T04. Depending on the leaf spring set up, legnth of hangers and axle mounting point above or below…
The Timbren Silent Ride #TSR14KT01 can actually be installed by welding it on or bolting it on. You could do both welding and bolt it on, but that is not really necessary. I am not sure of the bracket to move it around on the frame, but they do have…
Hey Donziman, so we have three different options for base plate kits that fit your 2024 Ford Maverick. We have the Roadmaster #RM97RR, the Demco #DM77YV, and the Blue Ox #BLU86HR. We don't have an etrailer base plate kit available but (spoiler…
The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 2-3/8" Round Axles - 7,000 lbs #TSR7000T04 will actually give you more frame contact than a typical leaf spring system as the hangers have less contact, but you are correct it will…
