The correct Thule fit kit for your 2018 Mazda CX-9 to use with your Thule feet #TH710601 is the part #TH67KE. Sounds like you already have crossbars but just want to mention the part #TH711320 is the correct size.
Yes, the SightLine Towers for Yakima Crossbars #Y64AR can be locked with the Lock Core Kit #Y07204. Yakima changed the design slightly and there are 3 pieces to this tower system (as opposed to the normal 2), with the middle piece being the part that…
Hey Jim, I am going to let you in on an little secret...so the etrailer hitches like the part #e87AR are basically the exact same as the Curt hitches as they are made by same company. Only difference is the powder coat is a matte finish as opposed to…
The Yakima SightLine Towers #Y64AR and RidgeLine Towers #8880624 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks #Y07204 is hidden behind the outer cover on the SightLine…
The most aerodynamic crossbar on the market is the Thule WingBar Evo Crossbar. The Yakima CoreBar and Yakima Jetstream are both comparable but Thule does have the edge in reduced wind noise and drag. They can all however be easily removed and…
You would not have to block out the fifth wheel plate of your hitch to prevent movement if you were use a fifth wheel to gooseneck adapter #KPG5-Q25-IP. The head of the hitch can move when using adapters like this.
The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
I was able to determine your 3,700lb UFP torsion axles should have a hub face of 89" and the bracket spread is 72". While we do not carry torsion axle we do have the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR7000T04 which…
Sometimes in shipping the hitches can get a few scratches or nicks on the surface. I would go ahead and hit them with some black spray paint, especially if you live up north and get snow and the salt that goes along with it. I attached an FAQ article…
You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…
The Kodiak Wheel Bolt #K12WB169 that you referenced should fit just fine. Since all of the differences are small fractions of an inch you are good to go!
Spring Hanger location dimensions are normally figured by the manufacturer and provided with the spring hanger kit, that includes all of the parts for installing the springs on the trailer frame. I have provided a chart that shows the spring hanger…
