Thanks for all that info, that was awesome. And for your 2019 Keystone Cougar 315RLS with a 5,200 lb axle, hub with 6 on 5-1/2" bolt pattern, and Nev-R-Adjust electric brakes, here is exactly what you need: - Dexter Trailer Hub and Drum Assembly…
For your 5,200 lb axles on your 2021 Keystone Cougar, you can use the Electric Trailer Brake Assembly #AKEBRK-7L-SA for the left hand side and #AKEBRK-7R-SA for the right hand side. The Nev-R-Adjust brakes are just self adjusting brakes just like the…
For hub/drums that fit your 2019 Keystone Cougar with 5,200 lb axles that are made in the US you'd want the part #8-201-5UC3-EZ. That said there aren't any USA made trailer bearings so what comes with are Chinese made. For a set of USA made…
The best 235/80-16 trailer tire we have for you is the Provider Radial Trailer Tire part #PRG80235. This tire has a 14 ply and load range G rating which is good for up to 4,080 lbs (per wheel). It has a maximum speed of 81 mph and comes with a two…
The Dexter Double Eye Spring 072-099-01 you mentioned is a double eye spring that is 26" long and 1-3/4" wide for a 6000lb axle. For a replacement we have the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long #e94SR which…
For your 2017 Jayco Jay Flight SLX 267BHSW travel trailer, I recommend the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403. This is a very nice weld on option adjustable from 47-1/8 to 77 inches. For a bolt on option, I…
You could weld the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 to the box frame that's welded to the frame of your 2019 Grand Design Imagine 2600RB travel trailer but would need to have a fabricator come out and look…
You'd need to box the I-beam frame where you plan to install the Ultra-Fab 2" Trailer Hitch Receiver #UF35-946403 and then you can weld it in place. You'd need to weld around the L-bracket basically of the hitch to the frame. See…
Appreciate the photos, and we do have a hitch for you, but the Curt #13703 is for a max 72 inch wide frame measured outside to outside of the frame, and it looks like yours is 73 inches. So what you will need instead is a weld-on hitch that is…
The arms of the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 can be taken out and rotated so the welding bracket is on the backside. The receiver tube is 2-1/2 inches square and the arm with the brackets is 2 inches square…
