I have a solution for you, but a ladder rack may not be the answer. While we have the DeeZee Invis-A-Rack Folding Ladder Rack #DZ951601 for 6 foot beds or #DZ951551 for 5 foot beds, we do not have a tonneau cover that will work with this ladder rack.…
We do have the K-Source #KS99NQ, which I believe will be a better option for your 2018 Chevy Colorado. These are custom fit snap on mirrors, and do not use any additional hardware or fasteners like the Longview mirrors you received. These are…
The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…
Your 2018 Chevy Colorado has the brake controller wiring ran under the dash of the truck but there isn't an adapter that uses a connector. Reason being there's only 4 blunt cut wires under your vehicle dash for the brake controller wiring and…
The Curt Custom Base Plate Kit #C88FR is going to sit higher than the Blue Ox #BLU93FR, as well as all of the other options available so it's really going to come down to your personal preference and the brand of tow bar you chose. Both the Blue…
Hi Tony; the #BK2-100 and #TMK52VR come with the same size bearings and grease seal. The main difference is the Timken name. This is usually associated with a higher quality bearings that are made in the USA which also accounts for the higher cost.
Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…
The Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal part #BK3-110 are made overseas as with nearly all trailer bearings. That said, so long as you use some quality grease like the Prime Guard Red Hi-Temp Wheel Bearing Grease part #L24FR and keep…
You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…
The Replacement Air Cylinder #RM-452109-10 is the correct part for the Roadmaster Even Brake Portable Supplemental Braking System #RM-9400. The Air Cylinder #RM-450600-10 is for the older 9060, 9100 and 9160 Even Brake systems.
If the LCD display on your #RM-9410 monitor does not report braking activity or system status, and the LCD display reads 'Even Brake', the monitor is not programmed to the ICX transmitter. The transmitter and the motorhome monitor are…
