In order to tow a trailer with a 2018 Mazda CX-9 you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part #e87AR which offers a direct bolt-on fit. This trailer hitch has a hidden design…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
While brake assemblies have a distinct left and right hand side the hub/drums do not and can fit on either side of the trailer like with the part #84556UC3.
With a circuit tester like the part #PTW2993 test the wires on the input side of the converter box of the #118278 to see if there's is trailer wiring voltage going into the box but not out. If that is the case the problem is a damaged converter…
When you test the 4-Way on the Curt T-Connector Wiring Harness, part #56016, at the rear of your vehicle, it should show now power on all 3 pins with the lights off. If you have the vehicle head lights on, you should have around 12 volts at the brown…
The Thule EasyFold XT part #TH903202 would be a great rack to use with your Aventon e-bikes and you would not need to use the bike frame adapter bar as we have confirmed this with customers who have this rack and also your bike. You will need the fat…
Hey Ken, so the light bar part #HLY54RR that you referenced was designed specifically to fit the Hollywood Racks Destination part #HLY66ZR but I am sure if you wanted to make it work it would be possible.
I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…
That is really strange and would indicate that your box is holding in condensation and not allowing it to vent out. The part #WHMAV2 would be a great solution to allow it to vent and prevent the moisture as long gas you sealed it up with a sealant…
The underbody panel you're referring to can be placed back on, but you'll have to trim it around the etrailer Trailer Hitch Receiver - Custom Fit #e87AR in order to get it to fit. It is a bit challenging with this vehicle so most people would…
Yes it will, Mark. The Malone Profile18S Rooftop Cargo Box MPG910 will work with round, square, aero, elliptical, and most factory crossbars, so they'll work with your factory crossbars on your 2016 Mazda CX9.
