Videos
for Tesla Model S Owners
Help Articles
for Tesla Model S Owners
Expert Answers
for Tesla Model S Owners
You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
view full answer...I reached out to my contact at EcoHitch to see if they have seen this issue before with the EcoHitch #306-X7201 on your Tesla and if they have any suggestions. My contact did say that the Tesla rear bumper has quite a bit of tolerance from the…
view full answer...The Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch item #306-XA2001 measures 10" long by 6" wide. The metal part is 1/8" thick and the rubber seal adds a 1/2".
view full answer...Yes, there is hitch receiver for your 2021 Tesla Model S, provided that it is not a Plaid or post refresh model. The EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2", part #306-X7201, fits all Model S trim levels. This hitch receiver…
view full answer...Yes, it will. The EcoHitch Trailer Hitch item #EH36SR is custom fit for your 2023 Tesla Model S. It has a 2" receiver and a maximum tongue weight capacity of 300 lbs so it will definitely work for your bike rack. I really like this hitch because…
view full answer...For your 2014 Tesla Model S the EcoHitch Stealth hitch part #306-X7201 is the best option overall and for carrying a bike rack. It's mostly hidden and has great ground clearance as well. It has a 2" receiver which allows you more options for…
view full answer...I checked with the manufacturer for you, and can confirm that the EcoHitch Stealth Trailer Hitch Receiver - 2" #306-X7201 is a fit for the 2021 Tesla Model S. This hitch allows the receiver to be completely removed when you aren't using it,…
view full answer...For your 2018 Mazda 3 I highly recommend the Yakima JetStream Roof Rack. This system consists of the two 50 inch JetStream Crossbars in Black Aluminum #Y00425 , the SkyLine Towers #Y53TR, and the Landing Pad #Y00248. The Landing Pads and Towers for…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
view full answer...










