Custom Fit 2013 Ford Edge Accessories

According to page 249 of the owner's manual for your 2013 Ford Edge, the 3.5L V6 has a max towing capacity of 2,000 lbs without the tow package but 3,500 lbs with the tow package. I'm not sure what all comes with the Class II Trailer Tow…

Yes, the Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #S64671 is a great economical rack to use on your 2021 Lexus RX 350 with a 2-inch hitch receiver. As far as installing and removing your hitch to your…

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

I looked through an online copy of the owners manual for the 2013 Ford Edge Limited and the #59 fuse looks to me like the only one you would need to pull. If the vehicle still starts then you would need to go with the normally open instructions for…

The best permanent install style tow bar braking system is the Demco Stay n Play part #DM86VR so you are definitely on the right track. The Hopkin lighting kit part #HM56001 installs easily as it is custom fit for your 2013 Ford Edge and doesn't…

We have what you need! Here are the parts: - Replacement Tire for Wheel on Yakima Rack and Roll Trailers - Qty 1 #Y8880282 - Replacement Inner Tube for Wheel on Yakima Rack and Roll Trailers - Qty 1 #Y8880283 - Kickstand for Yakima Rack and Roll…

I was able to find a document with Reese which shows the Head #RP58167 having the PAT Pending NO. 5375867. This is compatible with the Shank #RP54970 you found. As for the trunnion bars, the part 54946 relates to the end of the trunnion bar that…

The bar length is 30-5/8 inches long. The knuckle is 4-7/16 inches with each nipple being 1 inch tall by 1 inch diameter with a slight taper. I've attached a photo to assist. Hitch heads and spring bars are not normally compatible between brands.…

Based on your photo, it appears you have the dual cam system of the Reese Strait-Line. I researched your trailer to find a GVWR of 5895. Based on this, we can make some calculated assumptions on the tongue weight. The tongue weight of a trailer is…

If you want to replace your factory crossbars on your 2021 Toyota RAV4's flush rails in order to install a rooftop tent, I recommend the Thule WingBar Evo roof rack which includes the following parts: - Thule WingBar Evo Crossbars - Aluminum -…

Yes, replacement wiring harness #Y8880203 is the main, long wiring harness for Yakima Rack and Roll trailers. The shorter harness, which is used if adding the tongue extension, is #8880161. And the rear lighting harness, should you need it, is…

It is possible to mount the #Y8880282 and #Y8880283 yourself but you're going to need tire spoons. You will also need a way to hold the wheel in place, another person could hold it for you. However, as you saw from the other reviews more than…