Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(11 reviews)
Price: $253.80
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11380
Retail:$399.40
Our Price: $253.80
You Save: $145.60
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Photos
- Why etrailer?
CURT Trailer Hitch - C11380
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- No Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11380 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2005 - 2013 Chevrolet Corvette excluding Dual Mode Exhaust
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11380
Average Customer Rating: 4.9 out of 5 stars (11 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
- C11380
by: White Vette10/18/2014
Very nicely made/engineered hitch - beefy bars and welds - with excellent instructions especially the video. Great powder coating on the hitch for rust proofing. The "fish wire" included works like a charm - flipping the bolts right through the backing plates and down through the frame holes with no issues. With a stock rear sway bar the hitch should fit with no interference. With a larger track oriented bar, you may need to shorten the length of the receiver tube to allow clearance - if you do this, realize that any liability to Curt surrounding the hitch is immediately gone and you're on your own.
- C11380
by: Ed10/18/2021
fast delivery excellent quality and worked perfectly. always a good experience with etrailer
- C11380
by: Marko02/05/2021
Overall, I am happy with this hitch. Only 4-stars because I did need to enlarge one of the holes in order to get it to fit straight on the car. It allows me to carry a bike rack on my 2008 C6 Corvette with Borla S-Type II exhaust. I don't intend to use this vehicle for towing a trailer, but I'm sure it would work fine if I wanted to.
- C11380
by: Adam Escamilla04/15/2015
2009 Chevrolet Corvette
I am very happy with your product it looks awesome in my car
- C11380
by: Jose01/03/2019
2008 Chevrolet Corvette
Your product is a great item, its easy to understand instructions, and it fit right up to where it said it would fit. It's has great workmanship. The only problem I had was with the delivery of the product. They came one about 6:15 pm, and my gate was locked, and from there on it became a problem. I change the address to one of UPS, their own access point, and they could not get it to their own access point for a total of four days and 3 tries they still didnt get it right. Finally, I went to UPS distribution center in West Sacramento, where they told me that my box had busted opened and I told them to give it to me like that that they didn't have to repair the Box I would just look in there and pull out the items. It still remains to be seen if there's a items missing from that box.
- C11380
by: fred l07/29/2017
2011 Chevrolet Corvette
this was installed on 2011 the mufflers have double brackets and installer needs to be aware they are difficult to deal with but is a supper product
- C11380
by: Cameron S04/05/2018
2006 Chevrolet Corvette
The quickest shipping I've ever experienced. Placed the order, and then George notified me almost immediately that it had shipped. Everything arrived within 2 days, and all of the parts were correct. Now comes the task of installing it.
- C11380
by: Carlos02/19/2021
- C11380
by: Dennis11/23/2021
- C11380
by: Sylvain D.07/19/2012
very good product and fast shipping, th anks
- C11380
by: Gary02/27/2021
2012 Chevrolet Corvette
12
12
Ask the Experts about this CURT Trailer Hitch
- 2011 Chevrolet Corvette Receiver Hitch Installation Tips, Instructions and CapacityThe mounting holes in the bumper beam are located by installing the mounting hardware in the vehicle frame and then positioning the hitch and lightly tightening the frame hardware. You can then use the hitch as a template to drill the 17/32 inch holes in the bumper beam, see instructions link. Before drilling the 17-32 inch holes it will help to have someone look at the back of the vehicle and help you center the hitch with the license plate on the vehicle. Your vehicle owners manual...
view full answer... - Troubleshooting Rattle Sound After Trailer Hitch Install on 2008 Chevy CorvetteThe only versions of the 2008 Chevy Corvette the Curt hitch part # C11380 won't fit are the models that have the dual exhaust mode where when you accelerate hard the mufflers get bypassed. I looked up the Z51 specs and that is not a standard feature of it so this SHOULD fit well unless you also have the dual exhaust mode setup. Exhaust rattle on trailer hitches is normally fixed by bending the exhaust hangers so that the pipes are held further away from the hitch. Or you can go with a...
view full answer... - Size of Access Hole Drilling Needed to Install Curt Hitch C11380Thank you for your purchase of the Curt Trailer Hitch Receiver # C11380 from etrailer for your Chevy Corvette. The size of the access hole that you need to drill to install the hitch is 1-1/2 inches according to the instructions. If you were referring to instead the hole size that needed to be drilled to get the hardware though, it was 1/4 inches in the video, which you can see at about the :50 second mark. You are correct about the mounting hole sizes that should be drilled into the...
view full answer... - Recommended Method to Transport Dog Kennel on 2006 Chevrolet Corvette ConvertibleThe best solution for transporting your dog kennel on your 2006 Chevrolet Corvette convertible is to install a trailer hitch on the back of the car and then use a hitch-mount carrier. There is a hitch offered for your Vette (as long as it does NOT have the Dual Mode exhaust) and that is part # C11380 from Curt. The hitch bolts on using included hardware and requires just a bit of drilling. The linked install video and article will help you through the installation process. This light-duty...
view full answer... - Will Curt Trailer Hitch Fit a 2006 Chevy Corvette with Corsa Cat Back ExhaustTrailer hitches including # C11380 are designed for and tested on stock vehicles so I cannot say for sure if it will fit with aftermarket exhaust installed on your 2006 Vette. But if the new exhaust has the exact same dimensions as the stock exhaust and installs in exactly the same way then the hitch would fit. If you plan on doing any towing with the hitch then you can use 1-7/8 inch ball mount # C45571 or 2 inch ball mount # C45572. And for wiring you would need # 56014 .
view full answer... - Does Hitch for 2006 Chevy Corvette Require Stabilizer StrapCurt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack on their lighter duty hitches like the part # C11380 which is a fit for your 2006 Chevy Corvette. The reason for the strap is basically to help reduce vertical shock from bumps being transferred to the hitch and frame. I wish there was a different hitch available for your vehicle that did not require this strap. The most popular bike rack we carry that has...
view full answer... - Towing Components for 2011 Chevy Corvette Grand SportThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11380 does come with the mounting hardware needed for installation. This will not fit the dual mode exhaust but will fit all other models. The dual mode is the center not the outside. This will use the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 with hitch pin # F-2 and Hitch ball # A-82. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56014 is what...
view full answer... - Will the Kuat Sherpa 2.0 # SH12P Fit on a 2009 Chevrolet CorvetteThe Kuat Sherpa 2.0, part # SH12P, is an excellent bike rack and will work well with the Curt Trailer Hitch Receiver # C11380. The trailer hitch receiver has a max tongue weight of 200 lbs and the Kuat Sherpa 2.0 is only 32 lbs. Since the Sherpa 2.0 has a weight capacity of 40 lbs per bike, you will not have to worry about going over the weight rating of the trailer hitch. That being said, there are a few things to keep in mind. First, make sure that you consult your owner's manual to...
view full answer...
Do you have a question about this Trailer Hitch?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer hitch for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hitch information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.