Custom Fit 2012 Nissan Versa Accessories

Since you have a 6-way connection that you want to plug tow bar wiring into the correct kit you'd need is the part #RM-152, for the 6-way socket part #RM-910030-7, and then for the mounting bracket #RM-910030-5.

The Roadmaster Falcon 2 Tow Bar #RM-520 does come with a crossbar that features those gizmos Roadmaster likes to call "Quick Disconnects". That crossbar is the same size (there is only one) no matter the vehicle, but is only used…

The adapter part #PK12716 that you referenced only carries turn signal circuits so while I have a solution that would work, this would not be it. Instead you would want to wire the scooter lift power wires to a 7-way like part #PK12706. The ground…

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part #HM56200 which is a it for a 2015 Jeep Wrangler only comes with a 4-way. There aren't any custom fit options that come with a 6-way but all you will need to convert the above is…

The Nissan Versa is what is considered an economy car. As such it is smaller, gets better fuel economy, and weighs less than other vehicles. But, it was not designed to tow. This could be for any number of reasons such as, the engine was not…

The Roadmaster Lock Set - Hitch Lock and 2 Quick-Disconnect Padlocks #RM-304 does lock the easy disconnection points. You are correct that someone really determined to disconnect your vehicle will still be able to remove hardware and roll it away.…

I found a set of pad locks for your Roadmaster Falcon All Terrain tow bar. The Roadmaster Quick Disconnect Padlocks, #RM-308, is a set of four pad locks that are keyed the same. Unfortunately, Roadmaster does not offer the option of keying a new…

Roadmaster Recommends that you use a dry silicone lubricant on the retractable arms of the RoadMaster Falcon 2 Tow Bar #RM-520. The reason for this is because a dry lubricant will not attract dirt like a wet one.

For flat towing a 2011 Nissan Versa, You will need a base plate kit, tow bar, safety cables, wiring, supplemental braking system, and a possible high-low adapter. I have attached my recommendations on each of the following below. Flat-Tow Wiring:…

Yes, to flat tow your 2015 Nissan Versa behind a motorhome you can use Roadmaster Base Plates, #RM-52357-4A, which you reference, along with the Blue Ox Avail Tow Bar, part #BX7420. You will also need a RoadMaster Base Plate to Blue Ox and Demco…

A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system…