Custom Fit 2007 Toyota RAV4 Accessories

Yep! The current Inno square bar feet #INFR do work with the older Thule square crossbars since the two square bars are identical in dimensions.

In order to tow a trailer with brakes using a 2007 Toyota RAV4 you'll need a few different components. I have attached a list of these for you below. etrailer Trailer Hitch Receiver part #e98864 T-One Vehicle Wiring Harness part #118412 4…

Even the models of the 2007 Toyota RAV4 that had the tow package did not have any factory wiring. So what you'd need for a trailer wiring kit is the #118412 which installs by plugging inline with the taillight connectors of your RAV4. I…

The Curt Class III receiver, part #13509 is highly rated and would be a great choice for your Rav4. According to my research, the 2007 V6 is rated for 3500 lbs of towing when properly equipped. I would recommend checking your owners manual to…

All that you need to complete your installation is a brake controller and an installation kit and a 4-Way wiring harness which you already have. The Tekonsha Prodigy P2, #90885 is a great unit, and I would highly recommend it. The Electric Brake…

The big difference between 7-way and 4-way trailer wiring applications is if the trailer has brakes. If the trailer does not the 4-way is the common connector style but if the trailer does have brakes the 7-way is used. To cover everything the 7-way…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

For your 2013 Toyota RAV4, you will not need to cut the bumper fascia to install the etrailer Trailer Hitch Receiver - Custom Fit #e98864 if you have a factory bumper. I went ahead and attached a video of an installation of the hitch to a RAV4.

The Tow Ready wiring harness, part #118412, and the Curt wiring harness, part #C56165, that are available for a 2011 Toyota RAV4 will both require a separate power wire be ran to the vehicle battery. The separate power wire is used on many of the…

If clearance at the wheel wells and the additional inch of height at the coupler and floor is not an issue then larger tires are a good option. Larger tires create less friction as you travel because the number of rotations to go the same distance…

The size difference between the Kenda Karrier ST175/80R13 Radial Trailer Tire - Load Range D #AM10210 and a 185-80R13 tire is the diameter and the width. We don't have any radials in that size, so I'll compare to the similar Kenda Loadstar…

I pulled a Replacement Quick Grip Mount Assembly #TH05738 from our warehouse and found that it slipped easily over a Whispbar cross bar we had sitting in our demo bay. I attached a picture to show it could be done.