Unfortunately your Blue Ox Rangefinder II is not compatible with any new baseplates from Blue Ox. It is compatible with Roadmaster baseplates using adapter #RM-037. This adapter will still however not work with your baseplates. For a similar tow bar…
If you are looking at and LED Trailer Tail Light like part #STL8RB, then you will not need a converter to make it compatible with the 4-Way Wiring Harness on your truck. You will need to figure out the wiring on your trailer to make sure that you get…
Looks like you have a round 4-way connector in the picture you submitted. The colors you mentioned aren't totally a match for standard colors but they are close. Normally the colors are: White - Ground Return Green - Right Turn and Brake Lights…
A link to the trailer wiring you are asking about is provided, just scroll down the page to select the connector you have on your vehicle and trailer. The wires on the 5 pole flat are as follows White/ground, Brown/taillights, Yellow/left turn and…
Most of the time the 4-Way connector is wired as follows. Looking at the front of the socket on the vehicle side with the cover raised the top left pole is the yellow, left turn/brake pole, the top right pole is the right turn/brake pole, the bottom…
You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…
The biggest difference between Curt Hitch #13430 and #13408 is that the #13430 has a round cross tube whereas the #13408 has a square cross tube. This difference is primarily an aesthetic difference since both of these hitches have the same towing…
We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…
Hello James; you're going to need to identify the toilet to find the right replacement seat. There will be a sticker on the back like those seen below which will allow you to identify which one you have. Once you have this information you can…
Yes, the Ventline Ventadome Roof Vent part #V2119-603-00 is designed to wire to a switch like the one you mention part #VC0533-03-A. I have attached a wiring diagram for your reference. The Ventadome Roof Vent also comes in white part #V2119-601-00.…
The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…
You can utilize a power wall remote switch #VC0533-03-A or #VC0533-02-A (black or white). A rocker switch #BL0108-00 will work and you will need 2 of them. The installation kit #344270KITW will come with screws, tape, and sealant. You will also need…
