Custom Fit 2004 Chevrolet Colorado Accessories

For the Dexter 10K axles a 5/8" wheel nut #95188.

The Loadstar ST175/80D13 trailer tire, #AM1ST76, is a good tire for a pop up camper. But if you will be towing the trailer often or over long distances, a radial tire, #AM10199, would be a better choice. Radial tires track better and offers more…

I do have some options for you but none of our trailer axles match the exact measurements that you provided. Therefore, the best option we have for you would be to switch to an axle less system like the Timbren Axle-Less Trailer Suspension System…

You can mount trailer axles above or below the leaf springs. The difference is just the amount of ground clearance that the trailer would end up having. The biggest advantage with the spring below the axle (trailer will be lower) is that you would…

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

The Greystone 36" Electric Fireplace with Crystals - Wall Mount - Black - LED Side Lights #324-000080 is not designed for recessed installation. If you want the similar look with a recessed mount and LEDs I recommend the Furrion 40"…

To install the #C49UR Curt Assure brake controller in a 2021 Chevy Silverado, in addition to the controller you'll also need a #C51525 brake controller wiring harness. The harness plugs in to the connector located under the dash just left of the…

The Tekonsha Voyager Brake Controller, part #39510 will work well with your 2004 Colorado. The Voyager is designed for electric brakes only on a trailer with up to 4-axles. This is a proportional brake controller which means it applies the brakes on…

To plug into the factory connector on your 2002 Chevy Avalanche I really like the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part #C55774. This will plug into your factory connector and the big benefit is that it has both the…

Based on the inner and outer bearing numbers you provided (thank you!) the correct trailer hub assembly for your utility trailer is the #DX22XR. This hub does use the same #LM67048 inner bearing and #LM11949 as your existing assemblies. It is…

It looks like you have the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX598101 for a 2014 Ford F-150 with a short 6-1/2 foot bed. Based on that you are on the money with the part you need, which is the Replacement TruXedo Shur-Bond Velcro Brand…

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…