Custom Fit 2003 Ford F-150 Accessories

Hi Dick; the Benton LittleShift Bike Rack #B54VR cannot be used on an RV, trailer, or towed vehicle. Trailer rated bike racks are pretty limited, so you would have to use a 2-bike rack like the #KU84FR if you want to put it on the trailer towed…

Hello Joseph, yes there is! What you are looking for is the Anti-Rattle Hitch Lock and Cable Lock for 2" Hitch Mounted Bike Racks #e88RV. This will work with the Benton Bike Rack #B54VR, as well as the #B94FR and #B54FR so that the bike and rack…

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

The parts you will need to add a Tekonsha brake controller to your 2003 Ford F150 with factory tow package will depend on the trailer connector you have on your vehicle. If you have a factory 7-way connector on your vehicle, you will need the brake…

Lets start with the wiring connector for your 2003 Ford F-150. With a look under your truck we can determine if the 4-Way flat on your truck is a factory plug or not. If the 4-Way connector is a factory connector, the wiring harness will be connected…

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

The only differences in the 3 Curt Trailer Hitch Receivers #13355, #C13038 and #13359 for your 1999 Ford F-150 XL Flairside, is the construction and shape of the receiver cross tube and mounting plates. Of these 3 I would choose the Receiver #C13038.…

The amount of recess and drop is really similar on all the hitches for your 2002 Ford F-350. For the least amount of drop, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13355 or the #C14355. They both have the 2-1/2…

The P-29 number you're seeing on your Dexter Axle is actually the number for the plant that made the axle. There should be a stamp or sticker on your trailer frame near the coupler that shows what the axle capacity is, and if you can't find…

For the Metal Loom #A0500 you will want to use the self-tapping screws like the part #FA1131822. The nice thing about this screw is that it doesn't require a pilot hole, just line it up and let the drill bit end of the screw do the work for you.…

Since you are in salt water, you definitely want to go with stainless steel disc brakes to resist corrosion so you get brakes that last. For stainless steel disc brakes with a 10 inch rotor that work with 15 inch wheels and a 5 on 4-1/2" bolt…

The shocks you're wanting to compare have different sized eyelets and are designed for specific hydraulic actuators. Sometimes you can fit actuator replacement parts from one actuator to another but the majority of the time you need to use an…