All About the Replacement Feet for TracRac CapRac Ladder Rack Video

For the mounting feet for the older style CapRac 29200 (not the newer CapRac part #TH29200XT) you need the replacement feet part #TH8527646001. If you only have the crossbars then you likely need the hardware as well. The hardware can be found with…

The Replacement Feet for TracRac CapRac Ladder Rack #TH8527646001 come individually so you will want to order 4 of them. If you need the hardware you will use both Bag 1 Hardware for TracRac CapRac Ladder Rack #THHD80935A and Bag 2 Hardware for…

Since you already have the crossbars for the Thule TracRac CapRac Ladder Rack #TH29200XT all you need to complete your roof rack are the Replacement Feet #TH8527646001 and the Replacement Swivel Brackets #TA29203 to complete your setup. The pricing…

Sounds like you are looking for the Replacement Mounting Hardware Kit #TAHD-80931 which is the install hardware kit for the TracRac ladder rack that the #TA01-11155 fits.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Rick, I went through the install instructions of the Roadmaster Direct Connect base plate kit part #RM97RR and you actually trim out a whole in the shutters and reinstall them. They are not totally removed. Do you have a tow bar already?

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

Hey Scott, yes the hardware that comes with the Replacement Track Adapter Installation Hardware for Yakima OverHaul HD #Y69KR would fit into the tonneau cover tracks that you have on your 2020 Ford F-350 with the Embark tonneau. This kit will not…

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…