In-Depth Review of the Curt Short-Arm Weight Distribution System with Sway Control Video

With Curt Short Arm weight distribution systems like the part #C17322 that you referenced the distance from the center of the hitch ball to the far edge of the chain hanger will be 30-5/8 inches. A lot of times the best solution for V-nose trailers…

Hey Robert, thanks for reaching out! The 10K Curt Short-Arm Weight Distribution System with Sway Control #C17322 is going to have arms that sit closer to the coupler than pretty much every other weight distribution system on the market. With this…

I have a great solution for using a weight distribution system with your new V-nose cargo trailer. I recommend using the Reese Chain Hangers #RP58305 with the weight distribution system you choose. These brackets can either be bolted onto or welded…

It does look like an old style Reese system. We have seen a few of these and they are similar to the newer version #RP66084. The part pictured has been replaced with the newer dual cam system yet they function in a very similar way. They no longer…

The Tekonsha Prodigy P2, part #90885 is the brake controller I recommend most often. The controller is simple to set up and use, and is very highly regarded by our customers. Brake Controllers aren't vehicle or trailer specific, so it'll work…

The Prodigy P2 Electric Brake Controller #90885 will fit your 2011 Jeep Wrangler Unlimited because brake controllers are not vehicle specific. What is vehicle specific are the custom wiring harnesses. Your Jeep does not have the connector under the…

Thank you for providing that picture and helpful information. The correct lift kit for a 3,000 lb Dexter #10 torsion axle like yours is the #K71-707-01. This comes with all of the necessary hardware and will give you a 2-5/8" lift.

The trailer manufacturer may have something to say about drilling into the sides of the frame but if they are fine with it then you are good to go with chain hangers #RP58305. A steel frame would still be fine if you drilled into it. Aluminum can be…

The socket needed for the Fastway e2 is the 1-7/8" 12pt Thin Walled Socket #ALL643216.

Hey Robert, so we do have a solution with bolt on brackets like the Reese part #RP58305 for if you go with a Reese kit that uses chains. Do you know what the tongue weight of your trailer is? With that info we can pick out the correct system.

Hey Danial! If your 2024 Toyota Highlander is already equipped with a 7-Way then the Curt Echo In-Line #C79DR is a pretty simple installation since it just tees into the US CAR connection behind the 7-Way, and the only other thing I really recommend…

Hello Alex, thanks for reaching out. We actually custom make our own wiring kit which is designed specifically for this purpose. You can use the Universal Installation Kit #ETBC7. This kit will contain all of the components needed to upgrade your…