Correct Lift Kit for 2015 Forest River Rockwood Hard Side Camper With Dexter #10 Torflex Axle

Question

Question:

Hi, I have a 2015 Rockwood Hard Side pop up and it has the Dexter #10 Torsion Axle. What lift kit would I need? Picture of the axle tag is here. Thank you for help.

asked by: Bill C

1

Helpful Expert Reply:

Thank you for providing that picture and helpful information. The correct lift kit for a 3,000 lb Dexter #10 torsion axle like yours is the # K71-707-01. This comes with all of the necessary hardware and will give you a 2-5/8" lift.

expert reply by: Robin H

1

2015 Rockwood Dexter Axle Tag
(click to enlarge)

Bret B.

6/9/2024

Hello, I have the next size up 3500lb Dexter Torsion axle and I would like to confirm that the Item # K71-707-01 is correct for my 2015 Forest River Rockwood Mini Light trailer.

Robin H.

6/11/2024

@BretB as long as it is a #10. Sometimes the capacity can run outside of the axle number. The best way to verify is measure the distance between bolt holes center to center. If it is 8" this is the right kit for you.

Answer 1

If your Forest River Mini-Lite 1906 has a single torsion axle, you will be able to use the Axle Riser Kit- Single Square Torsion Axles #LC382741; however, if you have a Dexter Torflex #10 axle, you need the #K71-707-01. You'll want to check the…

view full answer...

Answer 2

The Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 will work with your 2021 Forest River Gray Wolf 26DBH travel trailer as long as you have underslung double eye leaf springs and 2-3/8" diameter axles. If you have 3" axles…

view full answer...

Answer 3

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 4

Hello BJ, thanks for reaching out. We should have a lift block kit that will work for you, but I will need a bit more info on your trailer. Specifically I will need to know your axle weight capacity. This will help us know which lift kit is correct.…

view full answer...

Answer 5

Hey Gregory, do you have Dexter brand torsion axles? If so the lift kit you'd need is the part #K71-707-02. If you happen to have Lippert axles we don't have a lift at this time. From previous customers with your camper we have found that you…

view full answer...

Answer 6

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…

view full answer...

Answer 7

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part #K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

view full answer...

Answer 8

Hi Greg; leaf springs aren't typically used to raise a trailer. However, if the #EM28AJ matches your current leaf spring measurements, and your current leaf springs are 3-leaf, and the leaf springs are sitting on top of the axle, that would push…

view full answer...

Answer 9

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

view full answer...