Determining Old Weight Distribution System Manufacturer and Replacement Part Options

Published 04/04/2019

Question:

I have a old style Reeves hitch.is it possible to remove the bracket on the spring bars and install a u bolt with chain that hooks up on the chain tension brackets that are mounted on the the camper tongue. Do away with the saddle brackets.

asked by: Dale

Helpful Expert Reply:

It does look like an old style Reese system. We have seen a few of these and they are similar to the newer version # RP66084. The part pictured has been replaced with the newer dual cam system yet they function in a very similar way. They no longer make that system, so I recommend upgrading to the newer system if you need replacement parts as those parts are no longer available.

I've attached an article on weight distribution systems to further assist if you want information on how to choose the best system for your trailer. If you need help, let me know.

expert reply by: Jason S

click to enlarge

Dale

4/4/2019

Jason S.

4/4/2019

Yes. you can use the uplift bracket you have or use # RP6637 or # RP58305 and then use the Reese Replacement Chain Kit for Uplift Bracket for Weight Distribution # 55630 on each bar. This will give you a basic weight distribution system rated for the same capacity as the system was with the brackets but you will lose the sway control.