Will Weigh Safe Weight Distribution Work for Towing Boat Trailer 2017 Kingfisher 2425
Updated 05/05/2025 | Published 04/12/2025 >
Question:
I have a 2018 Ram 3500 carrying a 2014 Eagle Cap 995 camper. To level the load I have added stable loads and air bags to the truck. I have installed torklift super hitch and torklift super truss so I can also tow my 2017 Kingfisher 2425 boat while carrying the camper. Tongue weight is 880 lbs and 6750 lbs boat with trailer weight. Super truss max tongue weight is 600 without weight distribution system and 1200 with. Boat trailer is ezloader double axle with 2” ball and surge brakes I am curious if the WS94RR would work for this setup or if you would recommend another setup.
asked by: Chris
Expert Reply:
Hey Chris, the Weigh Safe weight distribution system part # WS94RR would work great for you. This has a tongue weight range that would work great with your trailer that has a tongue weight of 880 lb.
Product Page this Question was Asked From
Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 12.5K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- Weigh Safe
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: weight distribution hitch
- Search Results: equalizer pole tongue adapter
- Search Results: pole tongue adapter
- Shop: Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 12.5K GTW, 1.2K TW
- Video: The Low-Down on the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems
- Q&A: Is There Rear Suspension Enhancement that Fits 2021 Chevy Tahoe
- Search Results: weight distribution
- Shop: Suspension Enhancement
- Search Results: towing accessories
- Search Results: towing mirrors accessories and parts
- Search Results: electronic sway control
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Shop: B&W Continuum Weight Distribution System w/ Sway Control - Underslung - 16K GTW, 1.6K TW
- Shop: Blue Ox Pole Tongue Weight Distributing Hitch Adapter
- Shop: Towing Mirrors
- Video: Review of Weigh Safe Weight Distribution Hitch - True Tow Weight Distribution Hitch 2 Inch - WS94RR
- Video: All About the Blue Ox Pole Tongue Weight Distributing Hitch Adapter
- Q&A: Weight and Sway Distribution Hitch For 2013 Camplite Trailer And Aluminum Frame
- Video: All About the 1-7/8" 12pt Thin Walled Socket
- Video: Checking Out the 1-7/8" 12pt Thin Walled Socket
- Q&A: Installing Equal-i-zer Weight Distribution System on Boat Trailer with Straight Tongue
- Q&A: Recommended Suspension Helper Springs for 2021 Chevy Tahoe Towing Large Aluminum Boat
- Shop: Trailer Hitch
- Video: Review of Hughes Autoformers RV Surge Protectors - Surge Protector - HU92VR
- Video: Setting up the Timbren Suspension Enhancement System on a 2022 Toyota Tundra
- Shop: Camper Tie-Downs
- Shop: Front Mount Hitch


Chris
4/20/2025
Hi James, my question mentioned surge brakes and according to Weigh Safe site, this Weigh Safe weight distribution hitch is NOT compatible with surge brake trailers. https://www.weigh-safe.com/weight-distribution-hitch/ Features 6? Drop Hitch, 8? Drop Hitch Trailer Compatibility ONLY compatible with 3?, 4?, 5? and 6? tall trailer frames up to 2.5? thick *Not compatible with trailers that have a frame larger than 5? and have the coupler mounted to the bottom of the frame. (Typically found on Jayco Trailers) *Not Compatible with Surge Brakes Due to the length of the hitch some trailers may require their chains and breakaway cable to be extended and or remounted. Can you confirm? If so, do you have another weight distribution that would work with my boat trailer surge brakes, the specs I have provided, and also will work with the Reese pole tongue adapter, part number RP58393? Thanks Chris