Old Reese V-5 Weight Distribution System Compatibility

Updated 08/21/2025 | Published 05/07/2020

Question:

what vechical does a reese v-5 model 36069 fit.

asked by: Henry H

Expert Reply:

The old Reese V-5 weight distribution system is not rated by the vehicle. It will be compatible with vehicles and trailers determined by the loaded tongue weight of the trailer along with any any cargo behind the rear axle of the towing vehicle. I've attached an article to assist.

Other than that, you simply need a trailer hitch with the 2 inch receiver which is most common and rated for weight distribution system use. Your specific WD system will have a minimum and maximum tongue weight rating for use. There were many different weights depending on the load bars used with your V-5 system.

Your system is too old for replacement head or spring bars. I've linked all our systems and replacement parts as we do have hangers and shanks as well as chains that are still available for your system.

expert reply by: Jason S

John S.

12/5/2024

Hi Jason, I was reading Henry H. comments about an old model Reese V-5 equalizer hitch. I have 4 spring bars, 2 have never been used. I had the original hitch head stolen and the second one was modified and can’t be used with spring bars anymore. I recently bought a travel trailer and need an equalizer hitch for it. I am now looking for another Reese hitch head since I have the rest of the gear. It is a 10,000 lb with 1,000 lb hitch weight. Would you know where I might be able to buy one? In a worst case scenario, I would put my old Reese V-5 gear up for sale. Look forward to your reply. Thanks, John

Jameson C.

12/5/2024

@JohnS Due to the age of the system we don't still offer a replacement head that will work. Would probably be time for a new system if you're open to that.

John S.

12/6/2024

@JamesonC Hello, Thank you for your quick reply. I would have to agree that it is probably time for a new model. Have to check for a good price for the features and ratings.

Jameson C.

12/9/2024

@JohnS what features and ratings are you in the market for?

See All (15) Replies to John S. ∨

Chef N.

6/25/2025

I would like to get some parts for the Reese v5 system I have. Also we live in Canada.

Kate F.

6/26/2025

@ChefN The Reese V5 is an older system that is no longer being made. We only have the following replacement parts: - Replacement lift bracket # RP21501 - New chains for the lift brackets you can use either part # 55630 or part # 3216. What replacement parts were you looking for Chef? If you are going by Chef, I must know your specialty dish?