Truck Bed Rail Caps

Hey George, thanks for reaching out! I'm attaching a photo from the instructions of the Westin E-Series Round Nerf Bars #23-1950 mounting hardware for you to check out. I don't know exactly where the DEF tank is on your 2013 Silverado or how…

Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…

Hello Dave, Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs #TH43003XT-000 fits both the 2020 Ford F-350 and the F-450. This would be a great fit for your 2020 F-450 Crew Cab 4WD Dually. I attached an install video to help with…

Hello Justin, thanks for reaching out. The XL Anti-Rattle Trailer Hitch Receiver Lock #SHP2040-XL is NOT compatible with the Weigh Safe Hitch w/ Built-In Scale #WS68RR. The receiver lock requires a hollow shank and the shank of the Weigh Safe ball…

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

Hello John, thanks for reaching out. For starters, the B&W Companion hitch #BWRVK3600 you were looking at is the correct fit for your 2022 Ram 2500. As you said, it will install directly into the 5 holes or "factory puck system" as we…

Hi Don; the difference between the #WS44MR and #WS82CR is the actual hitch balls. The #WS82CR has a stainless steel double-sided tow ball and the #WS44MR has a chrome-plated double-sided tow ball. Personally I would get the stainless steel option so…

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

Hi James; are you looking for an upgraded equalizer? I see you looked at the Road Armor Shock Absorbing Equalizer Kit #LC696740. We don't have specific fitment information for upgraded equalizers on any given trailer so the best thing you can do…

Hey Joe! Are these the leaf springs that came with your trailer? If so, I would say the length is correct. If they have completely flattened out over time that might account for the binding. I'm not sure how you measured so I went ahead and…

Hey Dan, I would be willing to bet that if you jacked the trailer up a bit it would allow the worn out equalizer to stretch out a bit and it would be a little longer. That said the shortest (front to back) cushioned equalizer we offer that would work…

I may have a solution for you, but there isn't an offset ball that fits the Ford factory gooseneck hitches. With that said, depending on the design of your gooseneck coupler you may be able to use the B&W Extend-A-Goose #BWTEXA4200. This…