Truck Tool Box Specs:
Features:
39" Long x 27" wide x 17" tall. Utility-chest-style tool box; black poly plastic; rigid frame with a double-walled lid; molded, lockable tabs for security (padlock sold separately).
More Information >Videos
for Truck Tool Box
Help Articles
for Truck Tool Box
Expert Answers
for Truck Tool Box
Hey Randy! For the OEM prep package you'll need to reach out to a Ram dealer, but I can help you out with an underbed system for your 2026 Ram 2500 if you aren't dead-set on getting the exact same as the OEM. The closest we have for your…
view full answer...Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.
view full answer...Definitely, Mike. The 12-ton Tallboy #PM94FR has more than enough power for your dually’s front axle. The main thing to check is clearance - it needs about 11-1/4 inch minimum height to fit, so measure under your lower control arm or frame first.…
view full answer...That’s a great question, Alvin. Even though your fifth wheel won’t come close to 12 tons total, the Tallboy #PM94FR gives you a generous safety margin and smoother control when you’re lowering heavy loads. The oversized 9-7/16 inch base plate spreads…
view full answer...Thanks for the picture TJ! Nice set up. Sorry, but the new Furrion Chill Cube item #LC54DX is only compatible with other Furrion Cube components. This is because of the new EPA regulations with the R32 refrigerant. You would need to purchase the…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...BAKFlip tonneau covers are going to interfere with opening the lid of the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box #UWS01048. Instead you can use a toolbox like the UWS Truck Bed Chest #UWS08297 or the #UWS08298 for black.
view full answer...In order to find the best toolbox for your setup you'll need to do some measuring, since you have a tonneau cover you'll measure your clearance from the top of the bed to the bottom of the cover while closed and since you have a fifth wheel…
view full answer...Hey Lorenzo. Your 2024 Chevrolet Silverado 3500 has what's called Pulse Wave Modulation, which will not provide the wireless cameras with the correct power it needs to run when connected. This is a power saving feature in newer trucks. To fix…
view full answer...Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…
view full answer...I took a look at the installation for your Ultra-Flex Tri-Fold on your 2017 Chevrolet Silverado 3500 and it looks like it completely covers the sides of your bed rails where the TruXedo Truck Luggage Expedition Truck Bed Cargo Management System…
view full answer...Filters
- 1 results
Contact and Help
What our customers are saying:
Easy place to shop. Fast delivery and great products. Very happy with my purchase.
Ed
Boynton Beach, FL