2010 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed Tonneau Cover

Features:

Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.

Features:

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

Features:

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.

Features:

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

Features:

Retractable tonneau with T-slot rails lets you add a ladder rack or roof rack to your vehicle. Aluminum slats and vinyl top layer offer strength and security of a hard cover with seamless look of a soft cover. Cover locks at any point along rails.

Features:

Easy in, easy on - this EZ Fold truck-bed cover clamps onto your side rails in minutes, and it folds up in seconds to allow access to your cargo. The low-profile cover also looks sharp, and it stores behind the cab when not in use.

Features:

The Supertop for Truck 2 features an improved design that allows for 1-person operation and features removable fabric side panels. When not in use, the top and side panels can be stored in a convenient built-in storage system. Black Diamond fabric.

Installation Notes:

No drilling required for installation

Features:

Retractable tonneau cover with T-slot rails lets you add a light-duty ladder rack or roof rack to your vehicle. Heavy-duty aluminum panels and silicon hinges help seal the bed. Multiple weather seals and drain tubes offer enhanced cargo protection.

Features:

Avoid the hassle of traditional, snap-style tonneau covers, improve gas mileage and upgrade the look of your truck with a TruXport. The cover attaches on top of your truck bed side rails with clamps and rolls up to store conveniently behind the cab.

Features:

Quad-panel matte black tonneau cover folds up to provide two-thirds or full truck bed access. Prop rods let you drive with cover open without blocking your brake light. Cover sits 1-1/4" above bed rails. Shuts with the tailgate open or closed.

Features:

Install crossbars (sold separately) in the slotted rails of this heavy-duty cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

Features:

Hard, roll-up cover with premium, 5-layer fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.

Tech Tip:

Optional Stake Pocket Covers (TX22AR) available for installation (sold separately).

Features:

Get top-notch style and versatility with this aluminum and fiberglass tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black paint finish provides durability.

Features:

Hard, roll-up cover with heavy-duty vinyl fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.

Features:

Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails. Install crossbars (sold separately) in the slotted rails to carry bikes, kayaks, and more above your bed.

Features:

Weather-resistant, roll-up cover keeps the gear in your truck bed secure and dry. Rolls up quickly by hand for full access to your truck bed. Aluminum slats keep cover tight and help prevent break in. Requires no drilling to install.

Features:

TonnoSport is the most affordable Access roll-up tonneau, and it has tons of great features: EZ-Dials for cover tension adjustment, a trigger latch to secure the cover, and a quick clip storage strap to tie it down. Sits 1/2" above the bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Heavy-duty, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. 1" Thick aluminum slats provide the best security.

Features:

Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

Features:

The Revolver X2 tonneau combines hard cover strength and security with soft cover convenience. The heavy-duty aluminum and vinyl cover sits flush on your vehicle and rolls up for full truck bed access. Easy, no-drill installation.

Features:

Soft tonneau cover keeps your vehicle's bed and cargo safe and dry. Roll up and remove for full truck bed access. Flush-mount and durable, matte black polyester and vinyl skin for a clean look. Automatic tension control maintains a tight fit.

Tech Tip:

Optional Stake Pocket Covers (TX22AR) available for installation (sold separately).

Features:

An original Access roll-up tonneau cover balances deluxe features with a reasonable price. Get an XT-Dial easy-grip tension adjuster, AutoLatch II, Element weather seal, and the famous Slantback design. Cover sits 1-1/2" above vehicle's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable cover opens and closes manually with a pop-up, locking handle that provides excellent security for your truck bed. Durable polycarbonate is long-lasting and supremely weather resistant. Sleek, streamlined design complements your vehicle.

Features:

Tri-fold gloss black tonneau cover folds up to provide two-thirds or full truck bed access. Prop rods let you drive with cover open. Cover sits 1-1/4" above bed rails. Shuts with the tailgate open or closed.

Features:

Tri-fold cover combines a stylish, low-profile look with maximum protection for your truck bed and cargo. Impact-resistant, lightweight aluminum panels fasten to side rails at 10 points for security. Easy to remove without tools for full bed access.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Get top-notch style and versatility with this all-aluminum tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black paint finish provides durability.

Features:

The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system instead of rails, allowing for temporary use and rapid installation and removal. This soft, tri-fold cover sports a matte black canvas skin that is durable and sleek.

Features:

Quad-fold tonneau cover folds up to provide three-fourths or full truck bed access - doesn't block brake light. Prop rods keep cover from coming in contact with cab. Cover sits 1/2" above bed rails. Shuts with the tailgate open or closed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

Features:

The Limited Edition roll-up tonneau cover has all the bells and whistles plus tie-down rings, the AutoLatch II, a LED light, the EZ-Retriever II, Cover Care cleaner, and a TrailSeal tailgate gasket. Cover sits 1-1/2" above your truck's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Remote opens and closes cover in under 30 seconds. Cover locks at any point along rails. Aluminum panels with silicon hinges offer superior water resistance.

Features:

The Trifecta ALX includes the same features as the Trifecta 2.0 but with a Secure Rotary Release Latching System at the tailgate and an automatic latching feature that willl make getting goods in and out of your truck bed that much faster.

Features:

Solid Fold 2.0 tonneau features a durable tri-fold cover with a rail-free design, works with your existing 18" - 20" standard toolbox, and has an easy-to-use clamping system for installation and removal. Watertight seal against toolbox.

Features:

Tri-fold cover combines a stylish, low-profile look with maximum protection for your truck bed and cargo. Impact-resistant aluminum panels feature a diamond plate finish for a bold, aggressive look. Easy to remove without tools for full bed access.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

The Vanish tonneau delivers a sleek, ultra-low profile and great features at an economical price. It sits only 1/2" above the bed, inside your vehicle's rails. XT-Dial offers quick tension adjustment, and a trigger latch secures the cover.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can remove it just as quickly for full bed access. Heavy-gauge aluminum panels with silicone hinges help protect your cargo from the elements.

Features:

Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails. Install crossbars (sold separately) in the slotted rails to carry bikes, kayaks, and more above your bed.

Features:

Tri-fold cover secures to side rails at 10 points for maximum security for your truck bed and cargo. Heavy-duty, lightweight aluminum panels feature a diamond plate finish for a bold, aggressive look. Easy to remove without tools for full bed access.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable hard tonneau cover protects your cargo and truck bed from the elements. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks every 12" along the rails, and it retracts easily with a quick-release handle.

Features:

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

Features:

Soft tonneau cover sits behind your 19" - 21" truck-bed toolbox. It features the XT-Dial, AutoLatch, and Access Slantback design - plus a tight seal between the toolbox and cover. Sits 1-1/2" above your vehicle's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable hard tonneau cover has rails with T-slots so you can add a ladder rack or roof rack. Heavy-duty aluminum panels and silicon hinges seal the bed. Cover locks every 12" along rails and retracts with a quick-release handle.

Features:

The LiteRider roll-up tonneau cover balances great features and an affordable price. Get EZ-Dials for quick tension adjustment, an AutoLatch to secure the cover and the Access Slantback design. Cover sits 1-1/2" above your vehicle's bed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Retractable hard tonneau cover protects your cargo and truck bed. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks at 12" increments along the rails, and retracts easily with a quick-release handle.

Features:

The Lorado roll-up tonneau has all the bells and whistles plus a low profile - it sits only 1" above your vehicle's bed. Features include an XT-Dial, Element weather seal, AutoLatch II, deluxe storage straps and the Access Slantback design.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Long-lasting, powered cover opens and closes with the press of a button. Built-in brake lets you secure cover at any point along the rails, and a cargo light makes it easy to see inside the bed. Durable polycarbonate is supremely weather resistant.

Features:

Tri-fold cover combines a stylish, low-profile look with maximum protection for your truck bed and cargo. Impact-resistant, lightweight aluminum panels fasten to side rails at 10 points for security. Easy to remove without tools for full bed access.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Tri-fold cover secures to side rails at 10 points for maximum security for your truck bed and cargo. Heavy-duty, lightweight aluminum panels feature a black urethane finish that absorbs impacts and resists scratching. Easy to remove.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Electric, retractable tonneau cover with T-slot rails lets you add a ladder rack or roof rack to carry all your sports and recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your vehicle.

Features:

Extang E-series tonneau cover features a tri-fold vinyl cover and an easy-to-use clamping system for installation and removal. Lightweight aluminum frame. Full perimeter seal keeps water out and prevents leaks.

Features:

Tri-fold tonneau cover folds up to provide two-thirds or full truck bed access. Prop rods keep cover from coming in contact with cab. Cover sits 1-1/4" above bed rails. Shuts with the tailgate open or closed.

Installation Notes:

Clamp-on style rail system requires no drilling for installation

Features:

Soft tonneau covers bed and easily rolls up to allow full truck bed access. Requires an existing Supertop for Truck 2 Tops setup (sold separately). Heavy-duty fabric constrution with EZ-Roll and bow system. Simple installation.

Installation Notes:

No drilling required for installation

Features:

Outfit your vehicle with the Deuce 2 tonneau cover and enjoy dual functionality and dual accessibility. This one-of-a-kind vinyl cover folds back 30" to allow easy access to the front of your truck bed - or rolls up and stores behind the cab.

Features:

The Trifecta 2.0 tonneau combines the look of a soft cover and the convenience of a hard, folding cover. Tri-fold, vinyl cover has a rail-free design, and it includes a self-contained, easy-to-use clamping system for fast installation and removal.