2010 Dodge Ram Pickup Roof Rack

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Heavy-duty crossbars mount to Yakima towers (sold separately) to create an aftermarket truck bed rack or roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Included Backbone mounting system provides a strong, stable mounting surface for platform. Compatible with many Rhino-Rack accessories.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Included Backbone mounting system provides a strong, stable mounting surface for platform. Compatible with many Rhino-Rack accessories.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Included Backbone mounting system provides a strong, stable mounting surface for platform. Compatible with many Rhino-Rack accessories.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This truck rack and load extender are the perfect pair for tackling long loads that extend past your truck bed. Adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. Low-profile towers make it easy to load gear.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

This truck rack and load extender are the perfect pair for tackling long loads that extend past your truck bed. Adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. Low-profile towers make it easy to load gear.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

This truck rack and load extender are the perfect pair for tackling long loads that extend past your truck bed. Adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. Low-profile towers make it easy to load gear.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

This truck rack and load extender are the perfect pair for tackling long loads that extend past your truck bed. Adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. Low-profile towers make it easy to load gear.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

This truck rack and load extender are the perfect pair for tackling long loads that extend past your truck bed. Adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. Low-profile towers make it easy to load gear.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

This truck rack and load extender are the perfect pair for tackling long loads that extend past your truck bed. Adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. Low-profile towers make it easy to load gear.

Installation Notes:

If your truck has a bed liner or bed rail covers, it may be necessary to cut away sections of the liner on the underside of your bed rails to properly install the BedRock cargo rack.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars

When open, sunroof may interfere with some accessories

Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack

Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap

Any load/mount extending beyond the rear hatch seam may cause interference

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Installation Notes:

Tech Tip:

Will not work on truck equipped with the RamBox system.

Features:

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to ditch brackets on your vehicle's naked roof. Compatible with many Rhino-Rack accessories.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to ditch brackets on your vehicle's naked roof. Compatible with many Rhino-Rack accessories.

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbar includes top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbar includes top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Roof rack is not intended for off-road use

A single load bar, on the cab of the truck, is used in conjunction with T-Load Hitch Mount to carry long loads. The T-Load Hitch Mount requires a 2" hitch receiver (sold separately).

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

SquareBar crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)