It is possible to combine a tailgate lock and a lock for a Leer camper shell. The best way to do this is to use the Pop & Lock Custom Tailgate Lock #PL34FR, which will work with the factory keyless entry system on your 2017 Toyota Tacoma. You can…
Hey Joe, while I don't know what brake controller you have you should be able to unplug it from the back of the brake controller and that would accomplish what you are wanting. What brake controller do you have?
For your 2009 Dodge Ram 1500 we have two option styles for a tailgate lock. We have the electric power lock style part #PAL8350 that will lock the handle of the manual style part #PAL9900 that locks the tailgate to the truck. If the goal is to lock…
When installing the Pop & Lock Custom Tailgate Lock, #PAL3300, on your 1995 Dodge Ram Pickup you will need to remove the lower of the three bolts and loosen the other two. I have attached installation instructions for you.
The Pop & Lock Custom Tailgate Handle with Lock #PAL5400 that you referenced is confirmed as a fit for all models of the 2005 Toyota Tacoma so it would work well for you. This one will key to your truck door key so that the same key will open the…
Pop & Lock tailgate lock #PAL5400 uses BOLT codeable locks. All you have to do is insert the vehicle key in the lock and turn it clockwise until it stops turning. Then remove the key. It's as easy as that. Your key will now unlock your…
Hey Kurt, is the outside of the frame channel totally vertical or does it taper in? If it's totally vertical you could attach the channel of the Weigh Safe weight distribution frame brackets to the frame by bolting them directly to the trailer or…
Hey Joe, thanks for reaching out! I can get you halfway to what you're needing, but at this point in time all of our camera systems either require a magnet, drilling, or they are only observable on a monitor as opposed to an iPhone. If you can…
It sounds like you might be searching for some replacement electric trailer braking assemblies or possibly just replacement parts. It's typically not much less cost effective to just replace the entire assembly so that's what I recommend. I…
I think your plan should make your new tailgate basically theft-proof. The Pop & Lock Custom Tailgate Lock #PAL3300 that you referenced is confirmed to fit the tailgate of your 2001 Dodge Ram 1500 and honestly any qualified mechanic should have…
Both of the Pop and Lock Tailgate locks you mentioned part #PAL8540 and #PAL8550 are a fit for your 2007 Toyota Tacoma and both come with the ability to manually lock and power lock the handle. The difference is that the part #PAL8540 comes with a…
The UWS Truck Bed Chest #UWS01047 doesn't come with any mounting hardware and doesn't actually have any holes predrilled into it for mounting so it would be a custom job to mount it. That being said you could just drill through the bottom of…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Filters
