2003 Ford Excursion Vehicle Tent

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

Hey Carolyn, If your 2024 Toyota Tacoma Trailerhunter has a 5' bed then you would need the Napier Sportz Truck Tent #NA77FR. If you have the long bed (6') then you would need the #NA67FR instead. One thing you might also want to pick up is…

Hey Lori, Napier's Sportz SUV Tents all use adjustable straps to fit to the vehicle so these are a universal-fit for all SUV's, CUV's, and minivans. The deciding factor for you is going be how much space you'd prefer to have. Starting…

Hey Lucas, It looks like both the Redarc #RED72CR and #RED68CR are going to include the same wire harness #RED99FR, but the #RED72CR is also going to include some mounting panels to make mounting the control knob into your dash easier so I'd go…

Hey Bill, what you need for the brake controller is the Redarc Liberty part #RED72CR which comes with the correct install harness for your 2021 Toyota Tacoma. This is the controller that just puts a small knob on your dash like you are looking for.…

I wish we could help but we don't have an online version of the ecohitch instructions we can share. This does come with them but EcoHitch is very protective about their intellectual property so they don't do digital versions. With that said…

I spoke with Access. The Toolbox Edition Soft, Roll-Up Tonneau Cover, part #A62439, is designed to fit behind toolboxes that between 19" and 21". With yours being only a half-inch longer than that, they stated that it would be a tight fit,…

Hey Ivan! The Curt #C37RV and TowSmart #TS44ZR probably do sit a little lower than the factory hitch, but it doesn't look like it is a significant amount. The bumper is slightly different with a cutout for the hitch if you have the factory hitch.…

Hello Dean, The Towsmart Trailer Hitch Receiver - Custom Fit - Class III - 2" #TS96VR weighs about 31 pounds and would be a great fit for your 2024 Kia Sportage. If you are looking to put a 4-flat on the on the back for some light towing, or a…

Hey Danny, we can definitely help but we don't have just a kit for what you need. What you'd instead need is to run a 10 gauge wire like part #10-1-1 through a breaker like the part #9510 from the positive post of your battery to the 12 volt…