Expert Review Video:
Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory Air Suspension system
More Information >Vehicle Suspension Specs:
Features:
Get the cushioning power of SumoSprings for your coil springs and keep your ride comfortable. The wedge-shaped springs fit between the individual coils of your existing springs and help support heavy loads on your rear suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your rear suspension when you are hauling heavy loads. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your rear suspension when you are hauling heavy loads. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Vehicle Suspension Specs:
Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Vehicle Suspension Specs:
Features:
Get the cushioning of SumoSprings for your coils. These wedge-shaped springs fit between the individual coils in each spring of your vehicle's front suspension for better load support and a more comfortable ride. Great for trucks with snowplows.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Front-end rake works when you're towing, but it cuts into clearance and tire size when you're not. This leveling kit evens things out up front so you can run bigger tires and give your rig a tougher, more capable look.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work on TRD PRO models.
Tech Tip:
Product does not fit models with the X-REAS suspension system or the Kinetic Dynamic Suspension System (KDSS).
More Information >Vehicle Suspension Specs:
Features:
As someone who hauls gear and takes on tough trails, you know how much a good set of coil springs can change the game. Upgrading gives you improved handling, load support, ground clearance, and the confidence to take on whatever lies ahead.
Tech Tip:
Lower Shock Mount Stone Guard (sold separately) is recommended to protect rear shocks from gravel.
More Information >Vehicle Suspension Specs:
Features:
Running gear in the back but keeping things light up front? This MT64 kit adds 2-1/2" of lift up front and includes upgraded rear coils to handle 440 lbs of constant load—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 440 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Want more clearance and better ride quality on your stock-weight 4Runner? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear with coils, struts, and shocks that improve comfort, control, and stance—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Need better clearance and support for gear at both ends? This kit adds 2-1/2" of lift up front and 2" in the rear, and can handle 330 lbs up front and 440 lbs in the rear. Matched coils, struts, and shocks improve ride, stance, and control.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 440 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Bumper up front but now your ride feels off? This BP-51 kit brings back 2-1/2" of front lift and 2" in the rear with matched coilovers, shocks, and rear coils that ride smoother, handle better, and bolt on clean - no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
Fully outfitted and feeling the strain? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear, and supports gear at both ends to bring back the control, stance, and ride quality your 4Runner needs under load.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 880 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Has your 4Runner lost ride height because you installed a bumper or winch? This kit restores 2-1/2" of lift, smooths out the ride, and brings back control—no cutting, no guesswork, just a suspension that's built for the way you drive.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Loaded your 4Runner with rear gear but left the front stock? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear, with coils rated for 880 lbs out back. It brings back control, improves the ride, and keeps your stance dialed in.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 880 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Built out your 4Runner with gear front and rear? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and supports heavy builds. Matched coilovers, shocks, and rear coils restore control, stance, and comfort.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 880 lbs of constant rear load.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Running gear in back but keeping things light up front? This MT64 kit adds 2-1/2" of lift up front and includes upgraded rear coils to handle 440 lbs of constant load. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 440 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Fully outfitted and feeling the strain? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear, and supports gear at both ends. Upgraded upper control arms correct geometry and restore confident, controlled handling on- and off-road.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 880 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Bumper up front but now your ride feels off? This BP-51 kit brings back 2-1/2" of front lift and 2" in the rear with matched coilovers, shocks, and rear coils. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Built out your 4Runner with KDSS with gear front and rear? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and supports heavy builds. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 880 lbs of constant rear load.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Carrying gear up front and in the back? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and is tuned to manage additional weight. Matched coilovers, shocks, and springs deliver control, comfort, and capability.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 440 lbs of constant rear load.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Outfitted your 4Runner up front but kept the rear stock? This BP-51 kit adds 2-1/2" of lift up front and includes adjustable coilovers and shocks that improve ride and control on any terrain. Upgraded upper control arms correct geometry.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Bumper up front but now your ride feels off? This BP-51 kit brings back 2-1/2" of front lift and 2" in the rear with matched coilovers, shocks, and rear coils that ride smoother, handle better, and bolt on clean - no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Built out your 4Runner with KDSS with gear front and rear? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and supports heavy builds. Matched coilovers, shocks, and rear coils restore control, stance, and comfort.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 880 lbs of constant rear load.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Outfitted your 4Runner up front but kept the rear stock? This BP-51 kit adds 2-1/2" of lift up front and includes adjustable coilovers and shocks that improve ride and control on any terrain. Upgraded upper control arms correct geometry.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Bumper up front but now your ride feels off? This BP-51 kit brings back 2-1/2" of front lift and 2" in the rear with matched coilovers, shocks, and rear coils. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Outfitted your 4Runner up front but kept the rear stock? This BP-51 kit adds 2-1/2" of lift up front and includes adjustable coilovers and shocks that improve ride and control on any terrain—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Carrying gear up front and in the back? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and is tuned to manage additional weight. Matched coilovers, shocks, and springs deliver control, comfort, and capability.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 440 lbs of constant rear load.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Rigged your 4Runner w/ front-end gear but kept the rear light? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear, and supports up to 330 lbs up front. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Carrying gear up front and in the back? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and is tuned to manage additional weight. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 440 lbs of constant rear load.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Outfitted your 4Runner up front but kept the rear stock? This BP-51 kit adds 2-1/2" of lift up front and includes adjustable coilovers and shocks that improve ride and control on any terrain—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Want better ride quality and more front clearance on your 4Runner? This MT64 kit gives you 2-1/2" of lift and upgraded struts and shocks. Upgraded upper control arms correct geometry and restore confident, controlled handling on- and off-road.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Carrying gear up front and in the back? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and is tuned to manage additional weight. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 440 lbs of constant rear load.
Tech Tip:
Product intended for models with KDSS.
More Information >Vehicle Suspension Specs:
Features:
Outfitted your 4Runner with front-end gear but kept the rear light? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear, and supports up to 330 lbs up front. Matched coils, struts, and shocks improve ride, stance, and control.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Need better clearance and support for gear? This kit adds 2-1/2" of lift up front and 2" in the rear, and handles 330 lbs up front and 440 lbs in the rear. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 440 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Built out your 4Runner with gear front and rear? This BP-51 kit adds 2-1/2" of lift up front and 2" in the rear and supports heavy builds. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 880 lbs of constant rear load.
Tech Tip:
Product intended for models without KDSS.
More Information >Vehicle Suspension Specs:
Features:
Loaded your 4Runner with rear gear but left the front stock? This MT64 kit adds 2-1/2" of lift up front and 2" in the rear, with coils rated for 880 lbs out back. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 880 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Has your 4Runner lost ride height because you installed a bumper or winch? This kit restores 2-1/2" of lift, smooths out the ride, and brings back control. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Want more clearance and better ride quality on your stock-weight 4Runner? This MT64 kit adds 2-1/2" of lift up front and 2" in rear w/ coils, struts, and shocks. Upgraded upper control arms correct geometry and restore confident handling.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Want better ride quality and more front clearance on your 4Runner? This MT64 kit gives you 2-1/2" of lift and upgraded struts and shocks that feel smoother on the road and more stable off it—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2-1/2 inches of lift to front of your vehicle.
More Information >
Filters
