What Bearing Kit do I Need for My Lippert 3,500 Pound Axle with Serial Number S007855123?
Updated 10/22/2025 | Published 04/03/2025
Question:
Hi there. I just wanted to see if you can lookup my camper axle so I can get some bearings. It’s a lippert 0332819. And the serial number is S007855123. Thanks!
asked by: Justin H
0
Expert Reply:
Hello Justin,
Looks like you were right on the money. I am showing with that information that it is a 3,500 pound axle so you will need the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100.
Getting things geared up for an upcoming trip? If so, where are you headed?
expert reply by:
Kate F
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Q&A: Torque Spec for Installing 10 inch Brake Assemblies on a Trailer
- Search Results: trailer hubs and drums
- Search Results: trailer spindles
- Search Results: trailer brakes
- Q&A: Dexter Replacement 3,500LB Axle With 89 Hub Face, 70 Spring Center and 4 Drop Spindle
- Q&A: Recommended 3,500 Lb Dexter Axle 94" Long at Hub Face
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: OptiMate Solar Duo Roof Mount Solar Charging System with Controller - 10 Watt Solar Panel
- Shop: OptiMate Solar Duo Roof Mount Solar Charging System with Controller - 40 Watt Solar Panel
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Article: How to Bleed Your Trailer Surge Brakes
Kate F.
10/22/2025
Hey Justin, how did things go with the hub bearing kit for your 3,500‑lb Lippert axle? Did it fit the way you expected? Your update could make it easier for the next person working on the same axle.