Amount of Rearward Tilt Provided By Rhino Rack # RTL002 T load Hitch Mounted Load Assist

Updated 08/21/2020 | Published 09/16/2019

Question:

How far down does the T loader Tilt, ? what to know how high I need to lift my 117 pound Kayak, THANK YOU

asked by: John

Expert Reply:

As you can see in the diagram I provided, the tilt is adjustable up to about 45°. The tilt mechanism has a pin that can be used in two different positions to allow a roughly 15 or 30° degree tilt or the pin can be completely removed for the maximum 45° tilt. If you click the provided link, you can see a product description video.

expert reply by: Mike L

click to enlarge

Mike

8/10/2020

I ordered and have the Rhino-Rack T-load assist. One side of the plastic side cover of the bar has broken off, I would like to order a set if that is possible? Also, the bottom rubber stops on the bar, not sure the correct name, as you lower the bar it rests on a round rubber leave the part that goes over a metal pin. Can I order one of those? Thank you,

Jon G.

8/21/2020

For the rubber strip on the bottom of the bar with the measurements is part # RRM641. If you ever need to replace a rubber strip from the top then that is part # RRM626.