Expert Review Video:
Vehicle Suspension Specs:
Features:
7,500-lb Capacity. 7" Diameter LoadLifter 7500 XL Ultimate air springs upgrade your rear suspension with full-time load support. They level your vehicle, improve braking and ride comfort, and reduce the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Load up your gear or hitch a trailer! This complete air suspension kit with on demand compressor and in-cab controller keeps your truck level, the ride smooth, and handling steady - all from your driver's seat.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. With air bags, compressor, and wireless controller all in one kit, you can adjust pressure from the cab or right at the hitch. This kit helps keep your truck planted and your ride smooth whether your hauling heavy or running light.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work with SuperSprings suspension kits
Product designed for vehicles with factory leaf springs and an upper overload spring
More Information >Vehicle Suspension Specs:
Features:
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work with SuperSprings suspension kits
Product designed for vehicles with factory leaf springs and an upper overload spring
More Information >Vehicle Suspension Specs:
Features:
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work with SuperSprings suspension kits
Product designed for vehicles with factory leaf springs and an upper overload spring
More Information >Vehicle Suspension Specs:
Features:
Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not work with SuperSprings suspension kits
Product designed for vehicles with factory leaf springs and an upper overload spring
More Information >Vehicle Suspension Specs:
Features:
8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
More Information >Vehicle Suspension Specs:
Features:
8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
More Information >Vehicle Suspension Specs:
Features:
7,500-lb Capacity. Heavy duty air springs support rear suspension for safety and stability when hauling your heaviest loads. Springs reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
Distance from the outside of the frame to the inside of the tire must be at least 8".
More Information >Vehicle Suspension Specs:
Features:
Upgrade your vehicle's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
Upgrade your vehicle's suspension with these maintenance-free contact pads. Sturdy polyurethane contact pads reduce sway and noise for a smoother ride. Optional spacer increases preload. Includes 4 pads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is designed for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
Does not fit models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
Does not fit models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Designed for use on vehicles carrying variable Heavy Loads
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. These maintenance-free microcellular urethane springs upgrade your vehicle's rear suspension. Each 2-piece spring connects at top and bottom and provides unlimited suspension travel and movement for a smooth, comfortable ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Designed for use on vehicles carrying variable Heavy Loads
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
2,300-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
2,300-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
2,300-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
2,300-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
7,500-lb Capacity. When your truck or van squats under weight, steering gets light and control fades. These extreme-duty air bags level your ride, help keep you in control, and protect your suspension from the punishment of heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
7,500-lb Capacity. When your truck or van squats under weight, steering gets light and control fades. These extreme-duty air bags level your ride, help keep you in control, and protect your suspension from the punishment of heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
Custom contact helper springs install above your vehicle's rear factory contact leaf springs. The added spring connects with the contact pad and increases stiffness when under load resulting in quicker Load leveling support. Easy installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Product adds a leaf spring to the factory overload spring pack.
Compatible with in-bed hitch
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
Custom contact helper springs install above your vehicle's rear factory contact leaf springs. The added spring connects with the contact pad and increases stiffness when under load resulting in quicker Load leveling support. Easy installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Product adds a leaf spring to the factory overload spring pack.
Compatible with in-bed hitch
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles that have been lifted, spacer kit T38AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles that have been lifted, spacer kit T38AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles that have been lifted, spacer kit T38AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles that have been lifted, spacer kit T38AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
800-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
800-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
4,437-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 2".
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Diesel Engine only
Product will add approximately 2" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
4,437-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 2".
Installation Notes:
No drilling through vehicle frame required for installation.
Designed for vehicles with Diesel Engine only
Product will add approximately 2" of lift to suspension
More Information >Vehicle Suspension Specs:
Features:
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. This isn't just air springs. It's a full onboard air system for everyday hauling. With a compressor and 1/2-gallon tank, you can keep your truck level, smooth out rough roads, and make quick air adjustments on the fly.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control to haul heavy and stay level, with air bags, compressor, and wireless controller working together to keep your ride steady.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
Front-end rake works when you're towing, but it cuts into clearance and tire size when you're not. This leveling kit evens things out up front so you can run bigger tires and give your rig a tougher, more capable look.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product does not fit models with the Snow Prep Package or Ambulance Package.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll. The StableLoad pads in this suspension enhancement kit feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll. The StableLoad pads in this suspension enhancement kit feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,000-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Demanding trailer, camper, or payload weight can leave your truck squatting and less controlled. These air springs add up to 7,500 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
1,200-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,200-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
Tech Tip:
Product intended for vehicles with leaf springs with the rear shackle that swings below the rear eye.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
Tech Tip:
Product intended for vehicles with leaf springs with the rear shackle that swings below the rear eye.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
You know your truck needs more rear height, not another suspension system to adjust. Solid cast iron blocks add a fixed 2" lift, with Grade 10.9 U-bolts and corrosion-resistant hardware built for life underneath your truck.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit models with Dual Rear Wheels.
Tech Tip:
Not for use on vehicles with Overload Springs.
More Information >Vehicle Suspension Specs:
Features:
You know your truck needs a little more rear height, not another suspension system to adjust. Solid cast iron blocks add a fixed 1" lift, with Grade 10.9 U-bolts and corrosion-resistant hardware built for life underneath your truck.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit models with Dual Rear Wheels.
Tech Tip:
Not for use on vehicles with Overload Springs.
More Information >Vehicle Suspension Specs:
Features:
2" Rear block kit designed to raise the rear suspension of your vehicle, includes solid cast iron blocks, Grade 10.9 U-bolts, and corrosion-resistant hardware for towing and hauling use.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit models with Dual Rear Wheels.
Tech Tip:
For use on vehicles with Overload Springs.
More Information >Vehicle Suspension Specs:
Features:
You know your truck needs a little more rear height, not another suspension system to adjust. Solid cast iron blocks add a fixed 1" lift, with Grade 10.9 U-bolts and corrosion-resistant hardware built for life underneath your truck.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit models with Dual Rear Wheels.
Tech Tip:
For use on vehicles with Overload Springs.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product will work with PullRite SuperGlide fifth wheel hitches 3349 and 3319.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When heavy loads make your truck sag and wander, this complete air suspension system with onboard air and wireless control levels your ride and restores stability. Plus, it gives you on-demand air for tires, tools, or air lockers.
Installation Notes:
No drilling through vehicle frame required for installation.
Relocation Kit PB88VV must also be purchased for vehicles that have a round axle tube with the breather located approximately 7" from the spring pack.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 3 inch wide springs
Tech Tip:
Application includes models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >
Filters
