Expert Review Video:
Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Does not fit models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Does not fit models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
For trucks with Rear Drum Brakes
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
For trucks with Rear Drum Brakes
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Designed for vehicles with a GVWR less than 11,000 lbs
Does not fit vehicles with a 4" rear axle housing
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Designed for vehicles with a GVWR less than 11,000 lbs
Does not fit vehicles with a 4" rear axle housing
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a GVWR less than 11,000 lbs
Does not fit vehicles with a 4" rear axle housing
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a GVWR less than 11,000 lbs
Does not fit vehicles with a 4" rear axle housing
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
Distance from the axle to the frame must be greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.
Installation Notes:
No drilling through vehicle frame required for installation.
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Product is intended for vehicles with factory top overload springs
Application includes models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level and in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is up to 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Application includes models with Dual Rear Wheels.
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Application includes models with Dual Rear Wheels.
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
Heavy trailer, camper, or bed loads can leave your truck squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Installation Notes:
Drilling through vehicle frame required for installation.
Designed for vehicles with a C-channel frame.
Not compatible with in-bed hitch; product mounts in same location as hitch brackets.
Tech Tip:
Product is designed for trucks where the distance from the frame to the axle pad is greater than 7-1/4".
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit models with Dual Rear Wheels.
Tech Tip:
For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit models with Dual Rear Wheels.
Tech Tip:
For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
Does not fit models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Does not fit vehicles with factory top overload springs
Does not fit models with Dual Rear Wheels.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Application includes models with Dual Rear Wheels.
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit vehicles with factory top overload springs
Application includes models with Dual Rear Wheels.
Tech Tip:
Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Lowered trucks have a weakened load capacity and reduced suspension travel. SlamAir adjustable air springs beef up your suspension, improving ride comfort, preventing bottoming out, and increasing overall safety.
Installation Notes:
Designed for vehicles that have been lowered 5" to 6"
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
This kit is designed to bolt on to the notched section of a Bell Tech frame behind the axle.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Lowered trucks have a weakened load capacity and reduced suspension travel. SlamAir adjustable air springs beef up your suspension, improving ride comfort, preventing bottoming out, and increasing overall safety.
Installation Notes:
Designed for vehicles that have been lowered 5" to 6"
Not compatible with in-bed hitch; product mounts in same location as hitch brackets
Tech Tip:
This kit is designed to bolt on to the notched section of a Bell Tech frame behind the axle.
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles with front Cast Lower Control Arms
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles with front Cast Lower Control Arms
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Designed for models with dual rear wheels only.
More Information >Vehicle Suspension Specs:
Features:
3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Designed for models with dual rear wheels only.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Does not fit models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Does not fit models with dual rear wheels.
More Information >Vehicle Suspension Specs:
Features:
10,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
Tech Tip:
For vehicles with front Cast Lower Control Arms
More Information >Vehicle Suspension Specs:
Features:
10,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
10,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with front Cast Lower Control Arms
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
For vehicles with front Cast Lower Control Arms
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Product can be used for vehicles with or without factory top overload springs
For vehicles with front Cast Lower Control Arms
More Information >Vehicle Suspension Specs:
Features:
10,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Fits Heavy Duty models only
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Fits Heavy Duty models only
Designed for vehicles with front leaf springs
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with front Cast Lower Control Arms
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
Compatible with in-bed hitch
For vehicles with front Cast Lower Control Arms
Product can be used for vehicles with or without factory top overload springs
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Designed for models with dual rear wheels only.
More Information >Vehicle Suspension Specs:
Features:
2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.
Installation Notes:
No drilling through vehicle frame required for installation.
Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.
Compatible with in-bed hitch
Product is designed for vehicles with approximately 2-1/2 inch wide springs
Tech Tip:
Designed for models with dual rear wheels only.
More Information >Vehicle Suspension Specs:
Features:
3,700-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Maintains stock ride height.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not add any lift to suspension; it will remain at the stock height
More Information >
Filters
