2018 Ford F-250 Super Duty Inno Velo Gripper Bike Rack for Truck Beds: Complete Installation Video

The only trailer hitch we have listed as a confirmed fit for your 2019 BMW X5 at this time is from Draw-Tite, not Curt. For this, you will want to use the Draw-Tite Max-Frame Trailer Hitch Receiver part #76288. This hitch is a direct fit which means…

One hundred percent yes, if you are not using weight distribution you can tow your travel trailer using the Rebellion ball mount you asked about: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR The #C57UR will fit your Ram's…

The Inno Velo Gripper #INRT201 will still work with the bike front wheel turned as long as the Gripper has something to grab onto. If it was just one Gripper holding the whole bike then there might be a stability problem. But there are 2 included so…

One simple option is the Topline rack #UG2500 which basically holds the bikes at the frame. It is also expandable if you wanted to carry more bikes. I have linked a video review of this rack for you. Another option for a single bike is the Inno Velo…

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 20K #C57UR is going to help dampen the jerking, jarring, bumps, vibrations, chucking, and rattling you may be experiencing but isn't going to evenly…

I have another option for you, but the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR you were looking at is not compatible with friction sway control such as the Curt #17200. The only sway control compatible with the Rebellion XD is…

I had some measurements taken at the warehouse and the dimensions of the rear cradle of the Thru Axle Bike Carrier for Rhino-Rack Pioneer Platforms #RR43233 at the smaller width is 1-1/4" while the larger is at 2". The strap measures at…

Yes you can replace the leaf springs that came standard on the trailer to soften the ride of the trailer. Just be advised that the total capacity of the trailer will be lowered because you will be limited by the lower rated springs. You can refer to…

I may have a solution that will save you some money and work. I spoke with our tire expert and his suggestion was to lower the tire pressure a little until you are comfortable with the way the trailer handles and rides. We always recommend using the…

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…