2018 Tesla Model 3 Vehicle Seat Covers

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Mitchell, thanks for reaching out! I've got a truck bed mat solution for your 2025 Toyota Tundra 6.5' bed, but at this point in time (April of 2025) Black Armour doesn't have a fit listed for their mat to fit your truck. The only…

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

Hi Pierre; there are no custom wiring harnesses with a T-connector for your 2021 Chevy Bolt EV but you can use the #119147KIT. This will still give you a 4-way connector at the rear to power your trailer's signal lights. If you're worried…

Hey Daniel! You won't have to remove the front bumper but you'll need to take that plastic piece off in the front to cut a hole for the receiver to protrude through. The EcoHitch Hidden Front Mount Trailer Hitch item #EH89CR has been…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Hello James, I am at a loss why Draw-Tite #75882 classified theirs as a class 4, it can handle the same weight as the Curt #C13207. The most concealed hitch would be the Curt #C13295, but it has the lowest towing weight so I am crossing that one off…

Hi Vern; they might but it depends on the configuration of your truck. For example, if your 2022 F-350 had an 8' bed with a factory/aftermarket hitch and your 2024 F-350 also has an 8' bed with a factory/aftermarket hitch they both use the…

Yes, it is! You're going to need to cut out more than just the holes though when installing the DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ. The mat is 3/8" thick so you'll have to cut out more of an H pattern or your 5th wheel hitch…

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey Denise, thanks for reaching out! I recommend picking up the etrailer Cargo Area Protector #e98877 for your 2010 Honda Element. I have used this for a 2010 Equinox and now have it on my 2010 Town & Country and it's one of my favorite…