Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Heather, unfortunately the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT is keyed unique so it's not available to be keyed alike. Instead, you'd have to use something like the Master Lock Set #ML44VR which come…
view full answer...The Firestone Ride-Rite Red Label #F56FV will fit your 2022 GMC Sierra 3500 Cab and Chassis. Even though there isn't a lip the lower bracket will grab onto the striker plate as the hardware is tightened. This combined with the J-bolt will keep…
view full answer...A little bit of play is acceptable, the coupler should be tight enough that the coupler won't come off the ball, but not so tight you can't close the latch. I typically tighten the coupler up until I feel a slight resistance when closing the…
view full answer...I would be happy to go over how to figure out which bearings your 2014 Aluma 8113 SR and 2012 6310H BT use, but this is not information we have on hand. To determine the bearings used on each trailer you will need to remove a hub assembly and look…
view full answer...The SuperWinch LT2000 Electric Utility Winch, part #1120210, you have referenced will only have a rated line pull of 2,000 lbs. The rated line pull of 2,000 lbs. will pull a rolling load of 10,050 lbs. up a 6 degree incline, but as the incline…
view full answer...The maximum for disc brakes and the Carlisle actuator #HBA16 is 1600 psi. If you are looking for a drum brake actuator then use #T4813102 and add the reducer #T4844100. Drum brakes require less pressure, 1000 psi maximum. The Titan actuator reaches…
view full answer...It sounds like you need the Hydrastar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM for the OEM brake controller on your 2022 Ram 3500. This will ensure that your controller works properly with the Hydrastar Electric Over Hydraulic…
view full answer...Hey Bernard, thanks for reaching out! The Lippert On-The-Go Telescopic Ladder #LC64HD does have the mounting brackets 2 rungs below the top of the ladder, but I do see the case you're making about wanting to lower the brackets even more to make…
view full answer...For the Demco #DM13689-95 eZ-Latch coupler, we recommend the #e98887 which would install into the hole indicated in the photo I've provided.
view full answer...The Trailer Coupler Lock #e98887 will work with a UFP A-60 coupler like your Dexter A-60 #DX56FR. The product picture for this lock shows it being used on an A-60.
view full answer...I spoke with Lippert about the mounting brackets for the Lippert On-The-Go Telescopic Ladder #LC64HD and found out that they are only sold as an OEM part. This means that only the motorhome/trailer manufacturer is able to order them so you…
view full answer...I recommend using foam tubular pipe insulation on the top rung of your Lippert On-The-Go Angled Telescopic Ladder, #LC64HD if you are concerned with possible damage/scratches to your motorhome. The rung is 1-1/2" so you will want to purchase…
view full answer...Related Searches
Filter Your Search
Contact and Help