Stinger load assist helps you load 1 kayak onto your Malone SeaWing carrier (MPG107 - sold separately). Retractable load assist slides out over the rear of your vehicle so you can easily push a kayak up onto the carrier. ... Features: Stinger load assist helps you load 1 kayak onto your Malone SeaWing carrier (MPG107 - sold separately) Load assist slides out over the rear of your vehicle to help you load a kayak onto the carrier Set boat on the extended arm and then push it upwards and onto the carrier Reduces strain of lifting the boat and protects hull and roof from scratches while loading Integrated V-block is padded to protect hull from scuffs and scratches during loading Polycarbon construction is corrosion-resistant Quick and easy installation - no tools required Made in the USA Specs: Application: Malone SeaWing carrier (MPG107) Dimensions: 24" long x 10-1/2" wide x 4" tall Load capacity: 75 lbs Weight: 4.6 lbs Limited lifetime warranty
This saddle-style kayak carrier with lift assist lets you easily load and transport 1 kayak on your roof rack. The slide-out lift assist lets you push the kayak onto the carrier without lifting the boat over your head.
If your trailer feels a little all over the place while you're towing, this setup helps straighten things out. It keeps everything more level, cuts down on sway, and gives you a smoother, more controlled ride without any extra noise or fuss.Features: Weight distributing hitch evenly distributes load across tow vehicle and trailer axles for improved stability Sway control system provides continuous, noise-free sway prevention in all weather conditions Hitch head design uses built-in caster to help center the trailer during towing Spring bar system supports both vehicle and trailer suspension for better handling Rotating latch brackets with clamp-on design allow for quick and easy setup Standard shank and coupler hitch head design for common towing setups Steel construction with powder coat over e-coat finish helps resist rust and wear Made in the USA Specs: Fits: 2" x " trailer hitch receivers rated for use with weight distribution systems Tongue weight: 550 lbs Gross towing weight: 5,500 lbs Shank: 9-hole/9" receiver stinger
Designed for Jeeps, UTVs, SUVs, or 2-wheel drive trucks, this steel ball mount is perfect for light-duty use. Tow up to 8K with the 2" ball or 10K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.
Replace 1 horizontal bolt on your Roadmaster Sterling tow bar. Secures the yoke to the stinger assembly of the tow bar shank.Features: Replaces 1 horizontal bolt on your Roadmaster Sterling tow bar Secures the yoke to the stinger assembly of the tow bar shank Dimensions: 3/14" diameter x 4" long Quantity: 1 bolt
Replace the yoke bushing on your Roadmaster Sterling All-Terrain tow bar. Attaches stinger assembly to yoke.Features: Replaces yoke bushing for Roadmaster Sterling All-Terrain tow bar Fits over 3/4" x 4-3/4" bolt to attach stinger assembly to yoke Quantity: 1 bushing
Replace the hex bolt on your Roadmaster Falcon 2 or Falcon All-Terrain tow bar. Secures the yoke to the stinger assembly of the tow bar shank.Features: Replaces the hex bolt for your Roadmaster Falcon 2 or Falcon All-Terrain tow bar Secures the yoke to the stinger assembly of the tow bar shank Dimensions: 1/2" diameter x 1-3/4" long Quantity: 1 hex bolt
Store your Guardian XL rock shield at the back of your motorhome instead of hauling it into a basement compartment. Stowaway slides over your tow bar stinger and secures with a hitch pin and clip.Features: Stores your Roadmaster Guardian XL rock shield at the back of your motorhome Keeps your bulky rock shield out of your RV basement or storage compartment Slides over the tow bar stinger for simple installation Secures to the tow bar with a hitch pin and clip Thumb screw tightens the collar to help prevent rattling Built-in hand hole lets you route a power cord or brake hose to your RV connectors Quickly removes when you need access to a rear storage compartment or rear access door Durable, baked-on powder coat finish resists wear and corrosion Includes mounting hardware and instructions Fits: Roadmaster Guardian XL rock shield Tow bars that insert into a 2" receiver hitch
This heavy-duty nylon screen blocks gravel and road debris from damaging your car as you're flat towing. Mounts onto the hitch and the quick disconnects of your tow bar with included brackets. Rolls up tight for storage on your RV's hitch.Features: Blocks gravel and road debris from damaging your towed vehicle Adjusts to fit your setup Slide the strut up or down the tow bar stinger to give the fabric the right amount of slack Stands up to rough road and weather conditions Heavy-duty nylon mesh is durable, flexible, and aerodynamic Powder-coated steel brackets resist corrosion Shock-absorbing struts provide maximum support Rolls up to just 4" in diameter for storage on the back of your RV Includes 4 buckled straps that snap on easily to hold it in place Mounts onto the quick disconnects of your tow bar and hitch receiver with included brackets Stretches over your tow bar between your RV and towed vehicle Made in the USA Specs: Fits: Roadmaster crossbar-style tow bars with quick disconnects Application: RVs with a 2" x 2" trailer hitch For 2-1/2" hitch receivers, use adapter RM75ZR (sold separately) Overall dimensions (fully extended): 72" long x 45" wide Fabric: 75-3/4" long x 55-1/4" wide Weight: 15 lbs Limited lifetime warranty Notes: The fabric may become warped or damaged if the RV exhaust is too close and cannot be redirected.
This heavy-duty nylon screen blocks gravel and road debris from damaging your car as you're flat towing. Mounts onto your tow bar and RV hitch receiver with included brackets. Rolls up tight for storage on your RV's hitch.Features: Blocks gravel and road debris from damaging your towed vehicle Adjusts to fit your setup Slide the strut up or down the tow bar stinger to give the fabric the right amount of slack Stands up to rough road and weather conditions Heavy-duty nylon mesh is durable, flexible, and aerodynamic Powder-coated steel brackets resist corrosion Shock-absorbing struts provide maximum support Rolls up to just 4" in diameter for storage on the back of your RV Includes 4 buckled straps that snap on easily to hold it in place Mounts onto your tow bar and hitch receiver with included brackets Stretches over your tow bar between your RV and towed vehicle Made in the USA Specs: Fits: Roadmaster RV-mounted tow bars with direct connect base plates Roadmaster bumper-mounted D-rings Blue Ox tow bars with Blue Ox brackets etrailer tow bars with etrailer brackets Demco tow bars with Demco brackets Application: RVs with a 2" x 2" hitch receiver For 2-1/2" hitch receivers, use adapter RM75ZR (sold separately) Overall dimensions (fully extended): 73" long x 39" wide Fabric: 75-3/4" long x 55-1/4" wide Weight: 15 lbs Notes: The fabric may become warped or damaged if the RV exhaust is too close and cannot be redirected.
Replaces the hitch shank for your Roadmaster BlackHawk 2 All-Terrain (RM-422 or RM-427) or Falcon All-Terrain (RM-522 or RM-527) tow bar. Charcoal gray powder coat finish resists rust and corrosion.
Filters
