This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.How to Install Redarc Tow-Pro Elite The Elite has almost no mounting restrictions. It comes in 2 pieces: the main unit and the control knob. The main unit mounts out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or interfering with your vehicle's airbags.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.The button has an adhesive back and runs on a replaceable battery. 2. Brake Output Indicator The outer ring gives you a visual indicator of how much power is being applied to the trailer brakes. This is determined by your max output setting. 3.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.The button has an adhesive back and runs on a replaceable battery. 2. Brake Output Indicator The outer ring gives you a visual indicator of how much power is being applied to the trailer brakes. This is determined by your max output setting. 3.
If you have only a 4-way flat on your vehicle and want to install a brake controller that pulls power from a 7-way trailer connector instead of wiring directly into your vehicle, this kit will adapt your plug for use with your brake controller.Features: Kit allows you to use a trailer brake controller that pulls power from your trailer connector instead of wiring into your vehicle Great for use with Tekonsha Prodigy RF (90250), Autowbrake (3430001), and Curt Echo (C51180) trailer brake controllers Pre-wired 7- and 4-way trailer connector mounts easily at rear of vehicle with included bracket Plugs into existing 4-way trailer connector on vehicle (20') 12-Gauge wire lets you run power from your vehicle's battery to the trailer connector General Purpose Thermo-Plastic (GPT) insulation is highly resistant to acids, gasoline, oil, grease and most industrial solvents Heavy-duty, 40-amp circuit breaker protects your vehicle's electrical system by preventing overload Installation hardware included Ring terminals for battery and breaker hookup Self-tapping screws for attaching circuit breaker and ground Zip-ties for securing loose wires Note: If your vehicle does not already have a 4-pole flat trailer connector installed, the etrailer application guide can be used to find the easy-to-install connector made specifically for your vehicle.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tow Ready Brake Controller Adapter To install your electric brake controller you need to connect the wiring of the controller to your vehicle.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.The button has an adhesive back and runs on a replaceable battery. 2. Brake Output Indicator The outer ring gives you a visual indicator of how much power is being applied to the trailer brakes. This is determined by your max output setting. 3.
I spoke to Tekonsha about finding the exact location for the brake controller on your truck and they told me that for your 2019 Dodge Ram 1500 "the connector is behind the area in the attached picture and from what we’ve been told you can reach…
Thanks for the well wishes! There are two primary differences between the original Tekonsha Prodigy and the newer Prodigy P2. The P2 will actuate electric over hydraulic trailer brakes, where the original Prodigy will not. The original Prodigy needed…
We have the best luck with the Prodigy P3 #90195 and P2 part #90885. There isn't a controller out there more reliable and better performing that these. The Curt Triflex part #C24VV isn't a bad controller but it's just not quite the same.…
Hey Darius, it looks like your 2020 Coleman Lantern LT17B uses the tire size of 205/75R14 so the best budget friendly wheel and tire combo you would want is the Karrier part #AM32153 for a white wheel or if you'd prefer a black wheel the part…
For a spare tire and wheel on your 2023 Coleman Lantern 17B use the Karrier ST215/75R14 Radial Trailer Tire - 5 on 4-1/2 - Load Range C - Galvanized Wheel #AM32182 or White Wheel #AM32181.
I talked to my tech contact at Progressive Dynamics. They tell me due to the design of the model 555 it is easier and more productive to do a complete swap and replace it with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart…
Okay, we can get your 2022 Hyundai Tucson set up with a 7-way so you can do some towing with a hitch that fits your vehicle, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR. What you will need are a couple of parts; first the 4-flat, which…
It's actually more simple than you think, but they don't make a 4/7 way connector for your 2013 Honda Pilot, so you will need to piece it together. To start, you'll need to use the Tekonsha #118265 kit for your 2013 Honda Pilot and then…
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
Hello Glen, I am glad that you wrote in. Since you have a 18,000 pound rig on a 2014 F-53 Chassis, you will want the Safe-T-Plus Steering Stabilizer with Mounting Hardware Kit - Custom Fit #ST88MR. The red ones are designed for a smaller camper than…
Hey Conyers, if its the original Prodigy brake controller it is not compatible with electric over hydraulic brakes but if it's the P2 #90885 it is. The easy way to tell the difference is to look at the color of the numbers on the display of the…
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Tekonsha brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.Features: Wiring adapter lets you easily connect your Redarc Tow-Pro Classic (331-EBRHV2), Elite (331-EBRH-ACCV2), or Liberty (RED24FR) electric brake controller to your existing Tekonsha brake controller wiring harness No need to remove your existing wiring harness when replacing your old brake controller One end plugs into Tekonsha wiring harness Other end plugs into your Tow-Pro electric brake controller Some wire splicing required for Tow-Pro Classic (331-EBRHV2) 2-Year warranty
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 2,000 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs Overall height: 13-1/4" Total from center of 5/8" pin hole with included ball mount installed: 16-1/2" Total length from center of 5/8" pin hole without ball mount installed: 13-1/2" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-1/2" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2" receivers that can accept almost any hitch-mounted accessory.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 5" Maximum rise: 2-1/2" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,700 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,000 lbs - 1,700 lbs Overall height: 10-1/2" Total from center of 5/8" pin hole with included ball mount installed: 16-3/4" Total length from center of 5/8" pin hole without ball mount installed: 13-1/2" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-1/4" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 4 stacked 2" receivers that can accept almost any hitch-mounted accessory.
Ball mount includes 2 hitch balls to fit your application. Tow up to 16,000 lbs with the 2" ball or 21,000 lbs with the 2-5/16" ball. Hitch pin and clip or hitch lock sold separately.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler 2 Different-size hitch balls let you tow trailers with different coupler sizes To change ball size, remove, rotate, and reinsert ball mount into receiver Durable steel construction Matte black powder coat finish resists corrosion Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers 2" Ball Gross towing weight: 16,000 lbs Tongue weight: 1,500 lbs Distance from center of hitch pin hole to center of hitch ball: 8-3/4" 2-5/16" Ball Gross towing weight: 21,000 lbs Tongue weight: 3,000 lbs Distance from center of hitch pin hole to center of hitch ball: 9-1/2" Overall length: 12-1/2"
Your garage can get cluttered with mounts for different trailers. Phantom X has two ball sizes on one mount, letting you tow anything from utility trailers to large campers. Two height settings help keep all your trailers level.Now you're stuck hunting for the 2" ball mount for your camper while everyone waits. Instead of wasting that time, use the Phantom X. It has 2" and 2-5/16" balls on one platform.
Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" Gross towing weight: 16,000 lbs Maximum tongue weight: 2,000 lbs Overall height: 13-3/16" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Distance from center of first pin hole to center of ball: 11-7/8" Distance from center of second hitch pin hole to end of shank: 1-1/4" Designed for 1.5 or smaller lunette rings Limited lifetime warranty
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,700 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs Overall height: 13-1/4" Total from center of 5/8" pin hole with included ball mount installed: 17" Total length from center of 5/8" pin hole without ball mount installed: 13-3/4" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-3/4" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2" receivers that can accept almost any hitch-mounted accessory.
This steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 20,000 lbs with the 2-5/16" ball. Can be used in 5-1/2" drop or 4-1/2" rise positions. Fits 2-1/2" x 2-1/2" hitch receivers.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Mount can be flipped to use in either a rise or drop position Slide ball mount up or down along shank and secure in place with included pins and vibration-resistant clip 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Adjusts in 1-1/4" increments Ball mount doubles as a weight-distribution shank Anti-rattle design helps to reduce towing noise Heavy-duty steel construction Black powder coat on ball mount and yellow zinc trailer balls resist corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 20,000 lbs Tongue weight: When used with 2" ball: 1,000 lbs When used with 2-5/16" ball: 2,000 lbs Maximum rise: 4-1/2" Maximum drop: 5-1/2" Distance between vertical adjustment holes: 1-1/4" Pin hole diameter: 5/8" Limited 1-year warranty
... Haul up to 21,000 lbs with the pintle hook, up to 10,000 lbs with the 2" ball, and up to 21,000 lbs with the 2-5/16" ball.Features: Pintle hook and hitch ball combo lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Pintle hook connects to lunette ring couplers Hitch balls connect to standard ball couplers Stowable design lets you store pintle hook with ball underneath your vehicle Remove pins holding pintle platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure platform for travel Pintle hook doubles as a hitch step with a rugged, built-in tread Adjustable height lets you tow trailers of different heights with the same vehicle Slide pintle hook up or down along shank and secure in place with included pins and clips Dual-process chrome plating on balls provide excellent rust resistance Black powder coated shank and platform are corrosion resistant Solid, stainless steel pins create sturdy, rustproof connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: Pintle hook: 21,000 lbs 2" Hitch ball: 10,000 lbs 2-5/16" Hitch ball: 21,000 lbs Maximum drop: 6" Maximum rise: 4" Incremental height adjustment: 1-1/2" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
Stow the ball and mounting platform on this double-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch No additional locks required to prevent platform and balls from being removed 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: When used with 2" ball: 7,500 lbs When used with 2-5/16" ball: 18,000 lbs Gross tongue weight: When used with a 2" ball: 750 lbs When used with a 2-5/16" ball: 1,800 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 9-3/8" Hitch pin hole farthest from ball: 10-1/2" Maximum drop: 8-1/2" Maximum rise: 9" Incremental height adjustment: 1-3/8" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
The thick channel plates and welded gusset on this steel ball mount make it perfect for heavy-duty use. Tow up to 10K with the 2" ball or 14K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.And the zinc finish provides corrosion resistance. <> Setting Up the BulletProof Ball Mount To set up this BulletProof Hitches adjustable ball mount, insert the 2-1/2" x 2-1/2" shank into your hitch's receiver. Slide the 2-ball platform into the adjustable channel, then use the included pins and clips to secure the platform at the height you need.
The thick channel plates and welded gusset on this steel ball mount make it perfect for heavy-duty use. Tow up to 10K with the 2" ball or 14K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Features: 2-Ball mount lets you hook up your trailer to your tow vehicle Shank slides into 2" hitch receiver on vehicle Hitch ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Hitch ball platform slides up or down channel and secures in place with included pins and clips 3 Mounting positions available Heavy-duty steel construction 5/16" Thick channel frame is strong and durable 1/2" Thick welded gusset plate braces shank and channel Hitch balls are welded to ball platform for extra sturdiness 2 Different-size hitch balls let you tow trailers with different coupler sizes Switch balls easily - just remove pins, flip ball platform, and reinsert pins Matte black powder coat finish resists corrosion 2 Corrosion-resistant ppins and clips are included Heat-treated steel construction withstands heavy weights Nickel undercoat with zinc topcoat resists corrosion and ensures strength Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Specs: Application: 2" x 2" trailer hitch receivers Ideal for vehicles with 12" - 18" clearance from ground to bottom of inside of receiver tube Maximum drop: 2" Maximum rise: 2" Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 14,000 lbs Maximum tongue weight capacity: 2,000 lbs Distance from hitch pin hole to hitch ball (center to center): Pin hole closest to channel: 10-7/8" Pin hole furthest from channel: 12-3/8" Overall height: 7-3/4" Total length with ball platform installed: 15-1/2" Total length without ball platform installed: 11-1/16" Distance from center of hitch pin hole to gusset plate: Pin hole closest to gusset plate: 3-3/4" Pin hole furthest from gusset plate: 5-1/4" Total weight: 25 lbs Pin hole diameter: 5/8" Adjustment hole diameter: 5/8" Limited lifetime warranty Note: This product is not compatible with the BulletProof pintle attachment.
You're towing different trailers, but each needs a different hitch height. This adjustable dual-ball mount switches between 2" and 2-5/16" couplers and stows under the hitch, so you can tow level without swapping hitches.Highlights 18,000 lbs GTW for Heavy Loads: Rated for 8,000 lbs with the 2" ball and 18,000 lbs with the 2-5/16" ball. Tow Different Trailer Heights: Height adjusts in 1" increments with up to 7-1/2" drop and 7-1/2" rise to level the trailer.
Filters
