1. Trailer Hitch Ball Mount
  2. Gen-Y Hitch
  3. Adjustable Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 7-1/2 Inch
  6. Rise - 2-1/2 Inch
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K

Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K

Item # 325-GH-1225
lowest price pledge
Retail:$674.35
Our Price: $659.99
You Save: $14.36
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 88 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Is this right for you? Product Expert Alexander C says:

Yes, if you:

  • Plan on hauling your camper or equipment trailer for years to come
  • Tow valuable cargo that shouldn't succumb to road shock and also want a comfortable ride
  • Don't have a ton of time to perform maintenance - just inject grease and you're good to go

No, if you:

  • Can't lift an extremely heavy hitch
  • Want to keep your backup sensors clear and don't want to buy longer safety chains
  • Don't want to pay a premium price
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if the load needs to be adjusted. 2" Ball, 2-5/16" ball, and pintle hook included. Lowest Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K part number 325-GH-1225 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (35)
  • Q & A (11)
  • Photos
  • Why etrailer?

Gen-Y Hitch Trailer Hitch Ball Mount - 325-GH-1225

  • Adjustable Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 7-1/2 Inch
  • Rise - 2-1/2 Inch
  • Gen-Y Hitch
  • Two Balls
  • 16000 lbs GTW
  • Stacked Receivers
  • Shock Absorbing
  • Steel Shank - Gray
  • Steel Ball

Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if the load needs to be adjusted. 2" Ball, 2-5/16" ball, and pintle hook included.


Features:

  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
  • 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
  • Shock-absorbing design ensures a smooth, steady ride
    • Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa
    • No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Tongue weight scale is built in to help you balance your trailer
    • Meter lets you know if your load needs to be adjusted before you tow
  • Heavy-duty steel construction
  • Zinc primer and powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • SAE J684 certified
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Built-in receiver size: 2" x 2"
  • Maximum drop: 7-1/2"
  • Maximum rise: 7-1/2"
  • 2" Ball capacity:
    • Gross towing weight: 12,000 lbs
    • Maximum tongue weight: 1,500 lbs
  • 2-5/16" Ball capacity:
    • Gross towing weight: 16,000 lbs
    • Maximum tongue weight: 1,700 lbs
  • Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs
  • Hitch pin hole diameter: 5/8"
  • Accessory pin hole diameter: 5/8"
  • 10-Year limited warranty


This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2" receivers that can accept almost any hitch-mounted accessory. This lets you easily adjust the height of the included ball mount, or any other accessory you choose to use. This mount also has built-in shock absorption to ensure a safe, smooth towing experience. Using technology similar to that found in torsion trailer axles, the Gen-Y mount absorbs road shock, isolating any rough jarring or chucking at the connection point. This prevents the rough motion from transferring from the vehicle to the trailer and vice versa.


Built-In Shock Absorption for a Smooth Ride

Driving over bumps, potholes, and uneven terrain causes road shock, which can result in a rough, bumpy ride and even potentially damage your vehicle or trailer. This Gen-Y Hitch torsion mount is designed to absorb road shock at the connection point to create a safe, smooth ride. This is thanks to the internal construction of the mount, which is similar to that of a torsion axle.


torsion w/cutaway

Pivot points are built into the Gen-Y mount. This allows for movement between the base, which slides into your vehicle's trailer hitch, and the stacked receivers, which provide the connection point for your trailer. When your trailer hits a bump, the stacked receiver portion of the mount will move up or down accordingly.


torsion diagram

Built into the Gen-Y mount are tubes with inner bars that are surrounded by rubber cords. As the receivers rise or fall, these inner bars twist inside of the tubes, attempting to follow the receivers' motion. But the rubber cords prevent the bars from twisting too far. And as each bar turns, these cords compress to absorb the shock. This means that any shock experienced by your truck can be absorbed before it reaches your trailer, and the shock experienced by your trailer won't get transferred to your truck.


This type of shock-absorption system is easy to maintain. Just regularly apply grease to the built-in zerk to keep the components in working condition. No airbags to fill. No small parts to repair or replace. No hassle.


Multiple Stacked Receivers for Easy Adjustment

stacked receivers

This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.


pintle hitch

Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.


With the 5 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.


Easily Check Your Tongue Weight

scale

This mount features a built-in mechanical tongue weight scale. The highest arrow on the scale indicates the mount's maximum tongue weight (1,700 lbs). The lowest arrow indicates no tongue weight (0 lbs). There must be a minimum tongue weight of 1,200 lbs for the built-in shock absorption to function. This means that the tongue weight scale's white indicator marker should be between the highest arrow and the middle arrow when you hook up your trailer to tow.



GH-1225 GenY Hitch Adjustable Torsion Drop Hitch with Pintle Lock - 2" Hitch Receivers - 7-1/2" Drop/Rise - 16K






Customer Reviews

Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K - 325-GH-1225

Average Customer Rating:  4.7 out of 5 stars   (35 Customer Reviews)

Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if the load needs to be adjusted. 2" Ball, 2-5/16" ball, and pintle hook included.

- 325-GH-1225
by:

894827



- 325-GH-1225
by:

Solid 6” drop hitch that is extremely heavy but well made. Very smooth with bigger loads. Required some modification to my Fab Four bumper for proper fit. I gave it four stars because my hitch didn’t have the set screw option as advertised. 03 Duramax 2500hd with six inch lift, 35” tires 16000lb Curtis receiver (well made five stars) 795381



- 325-GH-1225
by:

My brother and my son recommended this to me. I got to ride along with my son as he hauled a 10,000 lb. camper. Wow! I couldn’t believe the difference it made in the ride! The ride was so much smoother not to mention the wear and tear it saves on the tow vehicle! I’m impressed with the service from etrailer also. The package arrived in great condition, everything was there, and it even came a day earlier than expected! I highly recommend them!!! 787327



- 325-GH-1225
by:

Solid product! ETrailer sent this heavy item very quickly and I will look to do business with them again. 762332



- 325-GH-1224
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


I received my torsion hitch as promised from etrailer. The hitch is built with quality And very simple to install. I will be using it for the first time in a coupe of days. 658671



- 325-GH-1324
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


I have yet to tow with this hitch because I just received it today. Upon receiving the box I knew this hitch was not for the faint of heart. It felt like a massive hitch weighing in at 118lbs. Taking it out of the box I could see that this hitch is built like a beast and will likely be more hitch than I will ever need, but I needed a drop hitch and after asking etrailer questions and doing my own extensive research, I decided this was the hitch I should buy. I like the fact that it will give a little more space between the trailer and the truck, it can be used as a pintle setup if the need arises, and it comes with two ball sizes. Using this for my enclosed landscape trailer I am hoping it extends the life of tires and suspension components. I will try and update in the future after towing with this hitch. 475244


Comments
Product is still amazing. Really takes the bounce out of trailering. It’s almost like the trailers aren’t there. The real noticeable difference is my dump trailer when it’s loaded up. You can really notice the difference between this hitch and a regular hitch. Just in comfort it’s worth the money.
Peter - 02/12/2019

49430

- 325-GH-1825
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


I won't repeat what's already been stated. Indeed, the last hitch you will purchase! It's a heavy beast - shipping weight was 138 pounds! My load towing with this is actually a bit under-rated for the sweet-spot of this hitch, but I did not want to use a reducer on my 2019 F-450 to operate the lower-rated Gen-Y. It has definitely made a positive difference on rough terrain (especially off-road). In my case it is mainly to prevent the truck from roughing up the trailer with it's super-stiff nature. Of course this functions in either/any fashion. This will absolutely cover anything you could ever possibly tow with a conventional style trailer. Anything heavier and you'd be looking at gooseneck (which they also make a torsion hitch for - which I am also strongly considering). Not any fault of the hitch, but it will set off your reverse proximity sensors. No way around that with a hitch of this size. I would suggest that it be mentioned that use of this hitch is probably going to require most users to extend their safety chains a good bit. I had 24inch chains with a standard hitch and they fit fine, but this Gen-Y required me to use 38inch chains minimum to not only make it to the receiver chain openings, but to also make it around the hitch itself! Just thought that it might be helpful to others to know that. Luckily I had some longer Grade 70 chains already! Overall, no complaints what so ever. I know what if someone happens to rear-end my truck they are going to get an engine block full of Gen-Y (sort of passive perk I say). 588160



- 325-GH-1224
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


First impression massive, heavy Built Stout. My truck is always hooked to a trailer so I figured I would try a nicer set up I was using the B&W which is great for the average Joe that just needs to pull a trailer every now and then but this is a whole new world first trailer I pulled with It I could feel the difference right away it was smoother the vibrations and harsh thump feelings that I would normally get when pulling the trailers when I hit rough roads or bumps was not as bad or gone. It definitely made a huge difference super easy to move height if needed and an added bonus I didn’t think of is that it pushes the trailer back further so you can get a little tighter turning when backing up if needed and i can open the tailgate and it won’t hit the jack on the trailer. On top of that when people see it it’s a conversation starter There are not many of these out there so they are intrigued by the size and how it works. Bottom line in my opinion if you’re towing all the time it is worth the investment. I would invest in another. 771262



- 325-GH-1224
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Very nice, well built hitch, but the torsion part of it only works well when towing near the upper load limit of the hitch. Buy the same hitch without the torsion if you are not going to be pulling heavy loads near hitch capacity. You'll save lots! 610413



- 325-GH-1224
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Best hitch ever... performs above and beyond as advertised. Will never use straight or drop hitch again. We pull our bobcat up the 4wd drive beaches of North Carolina which are often bumpy. This hitch separated the trailer movement from the truck. Well worth the money. Do it once and never do it again! 672606



- 325-GH-1324
by: 11/13/2020

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Perfect, my second GenY Torsion hitch. Upgrading to the 21K from the 16K. There's not even a close second. 911770



- 325-GH-1024
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Just got this, looks are amazing. Fit and finish top of the mark. I wish it would fit on my work truck. I will modify my bumper, so it will work. 901390



- 325-GH-1224
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Great hitch. Just makes my safety chains to short. 900973



- 325-GH-1325
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


900234



- 325-GH-1024
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Holy heavyweight...this hitch is stout. I think it will serve me well for years on all applications that I use. Shipping was fast. Ordered on a Friday and was here Wednesday I paid for the 4 day as I was moving soon and wanted to be sure it would arrive. 882284



- 325-GH-1024
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Great product. Just the ticket for getting my trailer level and getting rid of all that bumping and rattling. Built to last too. 873996



- 325-GH-1324
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Awesome product !! i can tell the defrence from my regular hitch its way smoother and shipping was quick !! 857628



- 325-GH-1024
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


I bought the hitch because I frequently tow my 24 foot toyhauler down some pretty rough stretches of interstate highway. Its the kind of highway that when a trailer is attached to your truck, it drives the tow vehicle up and down like a fast yo-yo. I think the hitch helps a little but not nearly as much as I had hoped. 853513



- 325-GH-1024
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Very, very quality hitch. It does the job excellently. It is heavy though so consider a hitch handling device. -Joe 829736



- 325-GH-1325
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Great product Takes away the jerking sensations of speed bumps and the occasional pothole. When you do hit a bump at speed it takes a while for the flexing to settle back into a smooth ride. I equate the feeling like being in a boat. Now that I’m used to it it’s hardly noticeable. 803273



- 325-GH-1325
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Very heavy 796586



- 325-GH-1025
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


This is one of the greatest products ever made! I cannot feel the trailer bouncing up and down every time I hit a bump on the highway while trailering my boat. Yes the hitch is heavy but that is also the reason why it works so well. My only suggestion would be that with the 10K pound hitch there needs to be a 2.5 inch receiver not a 2 since all 2500 trucks now are using the 2.5 receiver. 792592



- 325-GH-1224
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Haven't installed it yet, but this things a beast. For the manufacturer, you should put a couple of heavy stickers on it for the delivery guys,lol. Looks well built and can't wait to see how it acts with my camper. 776598



- 325-GH-1324
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


Solid hitch! Customer service was first class!! Waiting for this Corona stuff to pass so we can use it!! 776204



- 325-GH-1324
by:

Review from a similar Stacked Receiver Torsion Drop Hitch in Trailer Hitch Ball Mount


I purchased the hitch for my sons 2500 GMC. He has told multiple trailers with the hitch really likes it. 738796


33
43
Show More Reviews

Ask the Experts about this Gen-Y Hitch Trailer Hitch Ball Mount

  • Can Gen-Y Stacked Receiver Ball Mount 325-GH-1225 Be Used in the Rise Position
    The Gen-Y torsion 2 ball mount, part # 325-GH-1225 can indeed be used in the rise position. Each rise position is about 2-1/2 inches apart as confirmed by Gen-Y. If you click the provided link, you can see a product demonstration video that shows the Gen-Y Stacked Receiver Mount in action.
    view full answer...
  • Is Gen-Y Torsion 2-Ball Mount Compatible with Andersen Weight Distribution Shank
    The Gen-Y Torsion Weight Distribution Shank - 2" Hitches - 6-1/2" Drop/Rise - 1,700 lbs TW, part # 325-GH-1202, would actually be your best option since it's specifically designed to work with weight distribution systems. This would essentially replace your Andersen shank (stinger), and give you 6 mounting positions along with a significantly smoother ride thanks to its shock absorbing design. That being said, if you wanted to use the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers...
    view full answer...
  • Can Gen-Y Hitch Torsion Ball Mount be Used with an Equal-i-Zer Weight Distribution System
    I verified with Gen-Y hitch that their torsion ball mounts, like part # 325-GH-1225, can be used with other manufacturer's weight distribution systems, however it isn't the best option. Instead of one of the torsion ball mounts I recommend the Torsion Weight Distribution Shank, part # 325-GH-1202. It's designed specifically for weight distribution systems and will replace the shank on your Equal-i-zer.
    view full answer...
  • Overall Length of Gen-Y Torsion 2-Ball Mount 325-GH-1225
    I went to our warehouse and measured the Gen-Y Torsion 2-Ball Mount # 325-GH-1225 for you. From the center of the hitch balls to the nearest of the hitch pin holes the length dimension is 15-3/4-inches; the two hitch pin holes are spaced apart on center by 1-1/2-inches. Please refer to the photo I prepared for you with these dimensions indicated. The longest standard 2-inch ball mount we offer, part # 80232, is 15-3/4-inches long but is rated for only 6000-lbs.
    view full answer...
  • Adjustable Ball Mount Recommendation with Scale and Higher Tongue Weight Capacity
    For tongue weights as high as what you have we really only have one option. We have the Gen-Y Torsion Adjustable Receiver # 325-GH-1225 which has a built in scale that goes up to 1,600 lbs of tongue weight.
    view full answer...
  • Does Gen-Y Torsion Ball Mount Have Anti-Sway Features
    The Gen-Y Torsion 2-Ball Mount part # 325-GH-1225 does not have any sway reduction features built into it. It's designed to give you an adjustable height ball mount setup with the two most popular hitch ball sizes and is also cushioned really well. Many customers also report a slight increase in fuel mileage too since the cushioning is so effective.
    view full answer...
  • How Heavy is Gen-Y Torsion 2-Ball Mount?
    The product weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1225 is 87 lbs. This hitch mount is awesome due to all the extra things you can use with it. It has 5 stacked 2" hitch receivers that can accommodate almost any hitch accessory. When you do use this though, I recommend picking up extra goodies like extra hitch pin locks # 34061650-D and anti-rattle clamps # 325-GH-033. Depending on what you're using this for, we also have extra tools like a weight distribution...
    view full answer...
  • 2010 Ford E450 Based Motorhome Yellowstone GulfStream Class V Hitch
    I've spoken to Curt on your behalf and there is no bolt on hitch for your 2010 E450, but you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. You will need to weld it on to your frame. This hitch has a maximum gross trailer weight of 15,000 lbs and a maximum tongue weight of 1,500 lbs. It has a 3 inch drop which you may want more. Here is the same hitch but it has almost a 11 inch drop # 15902. To make sure that your racecar trailer will not exceed...
    view full answer...
  • Recommendation For Weight Distribution System That Works With Gen Y Torsion Hitch On 2001 GMC Sierra
    Great choice for a heavy-duty hitch! I checked with Gen-Y and they recommend using their Gen-Y Torsion Shank for Weight Distribution hitches # 325-GH-1202 or the Torsion 2 ball Mount # 325-GH-1225 Next, you will need to find the best weight distribution system that works with your towing setup when it is fully loaded and ready to tow. This fully loaded weight will also include all cargo behind the rear axle of your 2001 GMC Sierra. I have attached a help article on determining tongue...
    view full answer...
  • Recommended Gen-Y Torsion Ball Mount for 2017 Ram 3500 Towing Daily
    For your 2017 Ram 3500, I recommend the Gen-Y Torsion 2-Ball Mount - 5" Drop/Rise # 325-GH-1224 or the 7-1/2" Drop/rise # 325-GH-1225 depending on the height of your trailer in regards to your trailer hitch receiver. Both are rated for up to 16,000 lbs towing and tongue weights up to 1,700 lbs. These 2 inch stacked receivers are very durable and well made for even commercial grade level applications. If you have a 2-1/2 inch hitch receiver, then I recommend the 6" Drop/Rise # 325-GH-1324...
    view full answer...
  • Why Cant Curt Rebellion XD Shock Absorbing Adjustable Ball Mount be Used in Rise Position
    The Curt Rebellion XD Shock-Absorbing Adjustable Ball Mount # C45949 can't be used in the traditional rise position due to how the shock mechanism is designed. It needs to push down in the drop position for the cushioning to be effective. You'd need a more traditional style adjustable ball mount to be able to flip it over into the rise position like the B and W Tow and Stow part # BWTS10048B. This fits a 2 inch hitch and comes with all three standard hitch ball sizes as well. Or if you...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Randy B
Written by:
Alexander C
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.