This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points beneath vehicle Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port near the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Running/tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear of your vehicle.
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points behind tail lights Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
If you have only a 4-way flat on your vehicle and want to install a brake controller that pulls power from a 7-way trailer connector instead of wiring directly into your vehicle, this kit will adapt your plug for use with your brake controller.Features: Kit allows you to use a trailer brake controller that pulls power from your trailer connector instead of wiring into your vehicle Great for use with Tekonsha Prodigy RF (90250), Autowbrake (3430001), and Curt Echo (C51180) trailer brake controllers Pre-wired 7- and 4-way trailer connector mounts easily at rear of vehicle with included bracket Plugs into existing 4-way trailer connector on vehicle (20') 12-Gauge wire lets you run power from your vehicle's battery to the trailer connector General Purpose Thermo-Plastic (GPT) insulation is highly resistant to acids, gasoline, oil, grease and most industrial solvents Heavy-duty, 40-amp circuit breaker protects your vehicle's electrical system by preventing overload Installation hardware included Ring terminals for battery and breaker hookup Self-tapping screws for attaching circuit breaker and ground Zip-ties for securing loose wires Note: If your vehicle does not already have a 4-pole flat trailer connector installed, the etrailer application guide can be used to find the easy-to-install connector made specifically for your vehicle.
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
I do have an option for you but that remove is currently obsolete. In order to replace it you must first upgrade the receiver to the Replacement 5-Function Remote Receiver with Replaceable Fuses part #LC305117 and then you can use the Replacement…
Hey Gary, thanks for the information! The etrailer Horizontal E Track item #e85VR would be a great way to add additional anchor points. You can bolt these tracks directly to your trailer's deck using self-drilling metal screws like item #SL99FR.…
Hello Dan, thanks for reaching out. The best way to add a 7-way and brake controller to your 2017 Hyundai Santa Fe with an aftermarket 4-pin is by using the Universal Installation Kit #ETBC7. This kit contains everything you need to upgrade the…
Hi Hector; to get that higher speed rating you will need to move up to a 12" tire. The only potential issue is the loss of clearance when compared to your current tires. If you have a 4 on 4 bolt pattern you can use the #AM35351DX and for 5 on…
It would not be economical to have your 2013 Kia Sorento AWD altered to tow with a tow dolly. AWD vehicles usually have 3 differentials so you would at minimum need to remove the rear differential, but most likely also the center differential or…
I spoke with Lippert about the mounting brackets for the Lippert On-The-Go Telescopic Ladder #LC64HD and found out that they are only sold as an OEM part. This means that only the motorhome/trailer manufacturer is able to order them so you…
So I'll start by saying that the fuses on your #PD9180A (lead acid) or #PD9180ALV (lithium) converter would not be affected in this case since they're designed to protect against reverse polarity; they won't blow if there is a short on…
Hey Rick, The fan on your Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4045KA only runs when it's needed (based off of temperature) so if it's been a bit cooler in your area like it's…
Hello Keith, It will not be an exact match, but you can make it work. The Bauer Products European Style RV Entry Door Lock #BA26AR requires a cutout of 7-7/16" tall x 3-3/4" wide, and the Global Link RV Lock with Bluetooth Connectivity…
If you elect to go with the Tekonsha Prodigy RF Brake Controller, item #TK27FR, on your trailer, instead of installing a brake controller in the cab of your 2005 Toyota Sienna, you will not need all of the items and wiring in the Electronic Brake…
Hey Lyn, I had to re-read the date you sent in for your pump a few times to tell if you were being serious or sarcastic - your water pump is older than like half of my coworkers so that's pretty impressive that it lasted that long. The closest…
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Adapter is wired for: 1995-2009 Dodge Ram 1500/2500/3500, Full Size, all models 1997-2011 Dodge Dakota Pickup w/Factory Tow Package 1998-2009 Dodge Durango w/Factory Tow Package 2007-2009 Chrysler Aspen w/Factory Tow Package Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into the built-in harness in your cargo area and then route it up to your dash so you can plug in your brake controller.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Length: 19-1/2' Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tow Ready Brake Controller Adapter To install your electric brake controller you need to connect the wiring of the controller to your vehicle.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter For most applications, the factory plug is located beneath the dash, near the center console.
Tow Ready Replacement Plugin Harness for the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.
Filters
