Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landinglegs.
Two leads are better than one! Add another leg to get your camper's landing gear working faster. Compatible with other single-motor systems with outer tubes measuring 29-1/2" long with 15-1/2" between weld stops. ... You should be able to add this to your current set of landing gear, even it's from a different brand. The specs on this lead leg, including the 80 RPM motor, should match the leg it will be paired with.
Clamp these spring-loaded pins around your landing gear so that you can quickly and easily adjust the drop legs. Heavy-duty steel is zinc plated for corrosion resistance. Works with square jacks up to 2-1/4" wide.Features: Spring-loaded quick pins make adjusting the drop legs on your landing gear a snap Pull pin to release, let go to engage Simple installation - clamps around jack leg No more losing pins Sturdy steel is zinc plated for durability and corrosion resistance Specs: Application: landing gear with up to 2-1/4" wide legs Pin diameter: 3/8" Quantity: 2 pins Lifetime warranty
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.And, just in case you're curious, the distance between the second and the third weld stops is 5-5/8". What to Know Before Installing Dual-Motor Landing Gear There are some benefits to having legs working independently of each other. First, each leg isn't bearing the burden of the other as it is in a single-motor system.
Pair this follow jack with a lead leg to get a complete landing gear set that is rated for 50,000 lbs.Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landinglegs.
Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).Features: Replaces the lead jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Provides a mounting point for the hand crank or motor (sold separately) Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs Distance between weld stops: Inside to inside: 15-1/2" Outside to outside: 17-1/2" Width of weld stops: 1"
Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement lead landing gear drop leg and snap pin will get you back to camping and enjoying the great features of your power landing gear.
Replaces the short, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.Features: Replaces the short, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0 Quantity: 1 short jack leg
Replaces the OEM lead leg for Keystone Montana fifth wheel landing gear.Features: Replaces the OEM lead leg for Keystone Montana fifth wheel landing gear Includes 1 replacement leg
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs
Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs: Length: Extended with drop leg: 68" Extended no drop leg: 52-1/4" Retracted: 32-3/4" Travel: 35-3/4" Drop leg length: 16"
Replaces the heavy duty control leg for your Lippert Control Ground Control 2.0 landing gear.Features: Replaces the driver leg for your Lippert Components Ground Control 2.0 landing gear Specs: Range: 32" Static rating: 8,000 lbs Dynamic rating: 4,000 lbs
Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).Features: Replaces the lead jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-2 and LG-4 Can be used with most landing gear sets, including Venture and Lippert models Provides a mounting point for the hand crank or motor (sold separately) Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Leg length: 33-1/2" Weld stops: Outside to outside: 21-1/2" Inside to inside: 19-1/2" Weight capacity: 4,000 lbs for manual crank, 2500 lbs for single motor
Replaces the lead leg on your fifth-wheel RV's Venture motorized landing gear. Mounts to the outside of your RV's frame rail.Features: Replaces the lead leg on your fifth-wheel RV's Venture motorized landing gear Mounts to the outside of your RV's frame rail 29-1/2" Outer tube with press fitted cap
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs: Length: Extended with drop leg: 68" Extended no drop leg: 52-1/4" Retracted: 32-3/4" Travel: 35-3/4" Drop leg length: 16"
Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This Follow Leg Repair Kit will get you back to camping and enjoying the great features of your Power Landing Gear.
Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.Features: Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0 Quantity: 1 extended jack leg
Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear.Features: Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear Includes 1 replacement leg
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-2 and LG-4 Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Leg length: 33-1/2" Weight capacity: 4,000 lbs
Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Made in the USA Specs: Black sleeve length: 33-1/2" Travel: 19-3/4" Drop leg length: 21"
Replaces the follow leg on your fifth-wheel RV's Venture motorized landing gear. Mounts to the outside of your RV's frame rail.Features: Replaces the follow leg on your fifth-wheel RV's Venture motorized landing gear Mounts to the outside of your RV's frame rail Specs: Length: Extended: 33-1/2" Retracted: 29-1/2" Fits: RVs with Venture-style landing gear
Replaces the weld-on bracket for your Lippert 5th wheel landing gear. Bracket measures 2" long x 3-1/8" wide x 3-7/8" tall.Features: Replaces the weld-on bracket for your Lippert 5th wheel landing gear Bracket measures 2" long x 3-1/8" wide x 3-7/8" tall
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.Features: Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs: Extended length: 33-1/2" Retracted length: 21" Drop leg length: 17" Travel: 19-3/4" Distance between weld stops: Outside to outside: 21-1/2" Inside to inside: 19-1/2"
Filters
