... Always use jackstands in pairs for safety.Features: Position these 2-ton jackstands under your vehicle at the manufacturer-indicated load support points Adjusting the height is easy with the ratchet-style lifting mechanism Hold control lever up while lifting the saddle shaft to your desired height Push control lever down to lock pawl into teeth located in center column Carefully lower vehicle to desired height Specs: Capacity: 2 tons Lift height measurements: Minimum height: 10-3/4" Maximum height: 16-3/4" Base dimensions: 6-11/16" long x 6-15/16" wide Quantity: 2 jacks 1-Year limited warranty Note: Always use jacks in pairs.
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jackstands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jackstands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jackstands with 10 lock-safe settings Jackstand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jackstand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jackstands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.Features: Raises, lowers, and stabilizes unibody vehicles Great for cars, crossovers, and small SUVs and trucks Safety bar locks the jack into place Removing the need for jackstands Wide base provides more stability for lifting loads safely Meets ANSI standards Specs: Weight capacity: 3 tons Lift range: 11" - 21" 1-Year warranty Note: This jack is designed to lift and stabilize 3 tons and should not be used to lift over that weight.
Minimize the amount of cranking needed to position your jack, and eliminate the need for wood or cinderblocks when storing your trailer. Jackstand provides a sturdy platform that evenly distributes your trailer weight.Features: Jackstand provides a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Wide, round base helps to distribute weight of trailer to prevent sinking into soft ground Light weight makes it easy to move and store Durable polyethylene construction Distinctive red color catches your eye Specs: Weight capacity: 5,000 lbs Dimensions: 8-5/8" diameter x 8-3/8" tall Note: Not designed to be used with trailer jacks with wheels or casters.
Eliminate the need for wood or cinderblocks when leveling your trailer. Camco's trailer tongue jackstand provides a sturdy platform that evenly distributes your trailer weight and prevents slipping. The UV-stabilized jack can support 5,000 lbs.Features: Evenly distributes the weight of the tongue Eliminates the need for bulky blocks of wood or cinderblocks 5,000 lb weight rating Durable, UV stabilized resin Lightweight and easy to store Made in the USA Note: Not designed to be used with trailer jacks with wheels or casters. 44635 Camco Trailer Tongue JackStand - 5,000 lbs
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 9" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jack foot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Hey Mike! The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR can be stored in that manner (with the oil plug facing up), but my contact at Power Mountain stressed that it should only be done for a short period of time, so I recommend setting it…
Hey Todd! At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get…
Hello Jeff, thanks for reaching out. Yes, the Caliber Vehicle Ramps with Wheel Chocks #CA24AJ can indeed support the front end of a 24K 38foot class a gasser. The ramps have a 20,000 lb capacity when used as a pair which will be more than enough for…
Hey Michael, for wet bolts you could use the part #126B2 and then for bronze bushings part #D014-077-00 but we do not have any brass bushings in the size you need. How many miles do you have on the Road Armor equalizers you think?
Hello Eulalio, thanks for reaching out. That truck is freaking nice looking! Good job! The Caliber Vehicle Ramps with Wheel Chocks #CA24AJ are 9" tall at the highest point. They will provide about 6-1/2" of lift off a level garage floor.
Thank you for providing that information. It sounds like you already know this, but you want to choose a replacement equalizer that closely matches the one that came with the trailer. Since you have an 8" measurement on your standard equalizers…
Hey Ronald, you actually don't need to use two sets of the Caliber Vehicle Ramps part #CA24AJ. You could just put them under the outside tires and they would work great. They have more than enough capacity at 20k since most your van would weigh…
The Replacement No-Drill Inflation Valve Bracket for Firestone Air Helper Springs Systems #F98ZR does not come with the cable ties you're looking for. Instead, you'll want to use the Replacement Inflation Valve Bracket for Firestone Air…
Hey Daniel, good question. This is normal for a torsion axle. You spinning the trailer 180 degrees is not going to damage the suspension. That is just how torsion axles work. As the wheels move the rubber inside the axle flexes, and that is what you…
Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.
The middle and rear jack mounting brackets of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set #LC675817 that you referenced are a total of 6 inches in width. That's how much free room…
Yes, the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote #LC675817 which uses 6 points for leveling would fit and work well on your 2010 Keystone Montana fifth wheel. This would be an excellent way to keep your…
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 11-1/2" and 12" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 11-1/2" or 12" round jack foot Diameter: 13-3/4" Weight: 8.4 lbs 2-Year limited warranty
Replaces 4 pads for your SnapPad jackstand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. Fits 9" round jack feet.Features: Replaces 4 pads for your SnapPad jackstand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Quantity: 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2-Year limited warranty
Replaces 6 pads for your SnapPad jackstand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. 4 Pads fit 9" round jack feet. 2 Pads fit 11-1/2" or 12" round jack feet.Features: Replaces 6 pads for your SnapPad jackstand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Total quantity: 6 pads 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2 Pads Application: 11-1/2" or 12" round jack feet Diameter: 13-3/4" Weight per pad: 8.4 lbs 2-Year limited warranty
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.Features: Heavy-duty rubber pad snaps onto the foot of your camper jack for extra stability Prevents sinking into soft ground Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal foot from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jack foot from corroding Simple, one-time installation Line up the pad beneath your jack's foot and lower the foot until the lip on the pad fully engages and locks in place Made in the USA Specs: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" octagonal or round concave jack foot Diameter: 13-1/4" Weight: 8.9 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 8" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" round jack foot Diameter: 10" Weight: 3.8 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" round jack foot Diameter: 11-3/4" Weight: 5.6 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 8" square jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" square jack foot Diameter: 11-1/2" Weight: 5.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 7" square jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 7" square jack foot Diameter: 9" Weight: 3 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 5-1/2" square jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 5-1/2" square jack foot Diameter: 8-1/8" Weight: 3 lbs 2-Year limited warranty
StayPut jackstand pad helps to distribute the weight of your jacks and stop them from sinking. EZ grip handle and handy storage strap. Lightweight and UV stabilized.Features: StayPut jackstand pad improves the distribution of weight on your jacks Helps to prevent sinking Great for use under trailer tongue, trailer jack, and awning support legs Handy storage strap EZ grip handle Lightweight UV stabilized Pad dimensions: 13-7/8" long x 11-7/8" wide x 3/4" tall
StayPut jackstand pad helps to distribute the weight of your jacks and stop them from sinking. EZ grip handle and handy storage strap. Lightweight and UV stabilized.Features: StayPut jackstand pads improve the distribution of weight on your jacks Helps to prevent sinking Great for use under trailer tongue, trailer jack, and awning support legs 4 Rubber feet provide extra gripping power Handy storage strap keeps things organized when put away EZ grip handle gives you a perfect handhold Lightweight, UV stabilized polymer construction resists sun damage Pad dimensions: 6" long x 6" wide x 3/4" tall
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.The included extensions attach to add extra clearance, so you don't have to carry around blocks and stack them to get the jack where it needs to be. Stable and Secure on Rough Ground When you're off-roading, a breakdown can happen anywhere. But when the trail or shoulder isn't level, the oversized base plate helps the jack stay planted and secure.
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-1/4". Extended height is 30-1/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-1/4" Retracted 30-1/8" Extended Travel: 14-7/8" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 6-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
Weld-on, pipe-mount swivel jack pivots up for travel, down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Total lift: 28-1/2" Screw travel: 15" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. ... Features: Stabilizers help support your small trailer or camper when it is parked Do not use for lifting Stackable design minimizes required storage space Simple setup Place beneath trailer and extend up by turning handle until threaded extension is raised to appropriate height Die-cast aluminum construction is strong, sturdy and rustproof Specs: Weight capacity: 6,000 lbs per stabilizer Height adjustment: 11" - 17" Quantity: 4 jacks Lifetime warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Travel: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Filters
