Replacement wiring harness in-linefuseholder. Recommended for applications where over-current protection is required.Features: Replacement wiring harness in-linefuseholder Recommended for applications where over-current protection is required Specs: Maximum fuse: 10 amp Wire gauge: 16 gauge Quantity: 12
Replacement wiring harness in-linefuseholder. Recommended for applications where over-current protection is required.Features: Replacement wiring harness in-linefuseholder Recommended for applications where over-current protection is required Specs: Maximum fuse: 10 amp Wire gauge: 14 gauge Quantity: 1
Watertight in-linefuseholder is designed for 12-gauge wire. Low-profile holder is used where neatness is desired. Fuse not included.Features: Watertight in-linefuseholder Fits 12-gauge wire Designed for a mini fuse (not included) Use in locations where a low profile is needed Quantity: 1 fuseholder Made in the USA 9545 Spectro 12-Gauge Mini FuseHolder - Qty 1
Watertight in-linefuseholder is designed for 16-gauge wire. Low-profile holder is used where neatness is desired. Fuse not included.Features: Watertight in-linefuseholder Fits 16-gauge wire Designed for a mini fuse (not included) Use in locations where a low profile is needed Quantity: 1 fuseholder Made in the USA 9544 Spectro 16-Gauge Mini FuseHolder - Qty 1
Welcome back Linda and thanks for the pic! Unfortunately, the SnapPad SnapJack item #SN44VR are not going to work with your BAL Type C stabilizing jacks because the mounting tabs are too narrow. The SnapPad item #SN39FR are the only options to add…
Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…
While we have an option for you, the Agricultural Spindle #TRU54FR uses uncommon bearings, so there isn't a hub for it with a 5 on 5-1/2" bolt pattern, just the 4 on 5" Trailer Hub Assembly #AH15450ECOMP. What you can use instead is a…
Hey Andrew, the Demco Stay-IN-Play Duo is an excellent choice for the 2026 Bronco and includes the breakaway switch and cable, so no additional breakaway kit is needed. With that said Ford's current flat-towing instructions for the 2026 Bronco…
When installing The Replacement Cable and Pin for Hopkins LED Breakaway Switches #HM20051, I recommend you attach the cable to a tie down point in the bed of you truck. You could also use a stake pocket tie down and attach the cable to it. Another…
Thanks for the picture Don! I do not have anything that connects to that 10-pin so I am hoping you're just at the wrong connector. I have linked a picture below along with an installation video that will show you what the Hopkins item #31345…
Hey, Kevin. Thanks for another question! On the Progressive Dynamics 4000 series part #PD4060K, the jumper being referenced in the installation instructions is the metal link between the two positive DC lugs. That jumper ties the two positive lugs…
Hi David; this is pretty common and all you really need is to throw in some simple diodes #RM-690. These will only allow power to flow in one direction so it will stop any backfeeding and power drain. It sounds like everything is in-line so you can…
Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…
Yes, it will! The Parallax/Magnetek or WFCO RV Power Centers #PD4655V will work with Lithium batteries like the Lifepo you mentioned, flooded lead acid, AGM, and gel batteries.
To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
This 350-amp fuse breaks the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch and your vehicle's battery.Features: 350-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your Jeep or truck Specs: Qty: 1 Length: 3-1/8" Width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This 300-amp fuse breaks the flow of current to your recovery winch if the winch motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch motor and your vehicle's battery.Features: 300-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your Jeep or truck Specs: Qty: 1 Length: 3-1/8" Width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
These 200-amp fuses break the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch and your vehicle's battery.Features: 200-Amp fuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation AFS fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your ATV/UTV Specs: Qty: 4 Length: 1-5/8" Width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
These 150-amp fuses break the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch and your vehicle's battery.Features: 150-Amp fuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your ATV/UTV Specs: Qty: 4 Length: 1-5/8" Width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
These 250-amp fuses break the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch and your vehicle's battery.Features: 250-Amp fuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation AFS fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your ATV/UTV Specs: Qty: 4 Length: 1-5/8" Width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
These 100-amp fuses break the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch and your vehicle's battery.Features: 100-Amp fuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your ATV/UTV Specs: Qty: 4 Length: 1-5/8" Width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
This 400-amp fuse breaks the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuseholder to mount in-line between your winch and your vehicle's battery.Features: 400-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder (sold separately) lets you mount fuse on your Jeep or truck Specs: Qty: 1 Length: 3-1/8" Width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This 100-amp dual-battery isolator pulls power from your start battery to charge your auxiliary battery. Isolator switches off to prevent dead battery if start battery voltage drops too low. Compact design for versatile mounting. Wiring included.You will need to make sure that the location you choose is not exposed directly to engine heat. Place the included fuses into the fuseholders and secure one end of each positive (red) cable to the studs on the holders. Then connect the cables to the positive terminals on the start and auxiliary batteries.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.Once you've plugged in the T-connector, run the wire with the fuseholder to your car battery and connect it to the positive terminal. Then insert the provided fuse into the in-linefuseholder. Once installation is complete, the 4-way flat connector will be stowed within the spare tire compartment of your trunk.
This fuseholder lets you permanently mount a 200- or 250-amp AFS fuse for a Bulldog Winch ATV/UTV winch near the battery of your ATV or UTV. ... Features: Fuseholder for 200- and 250-amp Bulldog Winch ATV/UTV winches Compatible with 8- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 3-mm Hex key (not included) required to tighten set screws Included caps help hold smaller gauge wire in place
These 200-amp fuses break the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuseholder lets you permanently mount the fuse near the battery of your ATV or UTV. ... Features: 200-Amp fuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation AFS fuse handles higher amperage when compared with many other fuse types Fuseholder lets you permanently mount the fuse near the battery of your ATV or UTV Compatible with 4- to 8-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 3-mm Hex key (not included) required to tighten set screws Specs: Qty: 4 fusesFuse length: 1-5/8" Fuse width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
These 250-amp fuses break the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuseholder lets you permanently mount the fuse near the battery of your ATV or UTV. ... Features: 250-Amp fuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation AFS fuse handles higher amperage when compared with many other fuse types Fuseholder lets you permanently mount the fuse near the battery of your ATV or UTV Compatible with 4- to 8-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 3-mm Hex key (not included) required to tighten set screws Specs: Qty: 4 fusesFuse length: 1-5/8" Fuse width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
This fuseholder lets you permanently mount a 300-, 350-, or 400-amp ANL fuse for a Bulldog Winch off-road winch near the battery of your Jeep or truck. ... Features: Fuseholder for 300-, 350-, and 400-amp Bulldog Winch off-road winches Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws
This 300-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuseholder lets you permanently mount the fuse near the battery of your Jeep or truck. ... Features: 300-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder lets you permanently mount the fuse near the battery of your Jeep or truck Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws Specs: Qty: 1 fuseFuse length: 3-1/8" Fuse width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This 350-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuseholder lets you permanently mount the fuse near the battery of your Jeep or truck. ... Features: 350-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder lets you permanently mount the fuse near the battery of your Jeep or truck Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws Specs: Qty: 1 fuseFuse length: 3-1/8" Fuse width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This 400-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuseholder lets you permanently mount the fuse near the battery of your Jeep or truck. ... Features: 400-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuseholder lets you permanently mount the fuse near the battery of your Jeep or truck Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws Specs: Qty: 1 fuseFuse length: 3-1/8" Fuse width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Custom trailer wiring included.Once you've made all of the necessary connections, insert the provided fuse into the in-linefuseholder. Once installation is complete, the 7-way connector will mount beneath your hitch. A mounting bracket is included to attach the connector to your hitch.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.Once you've made all of the necessary connections, insert the provided fuse into the in-linefuseholder. Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch.
Filters
