1. Accessories and Parts
  2. Bulldog Winch
  3. Electric Winch
  4. Electrical Components
  5. Fuse Holder
  6. Fuse
ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire

ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire

Item # BDW203547
lowest price pledge
Retail:$25.45
Our Price: $20.82
You Save: 18%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.59 lbs
Quantity: 
In Stock
BDW203547 - Electrical Components Bulldog Winch Electric Winch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

This 400-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires. Call 800-298-1624 to order Bulldog Winch accessories and parts part number BDW203547 or order online at etrailer.com. Free expert support on all Bulldog Winch products. Guaranteed Lowest Price and Fastest Shipping for ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (1)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

Bulldog Winch Accessories and Parts - BDW203547

  • Electric Winch
  • Electrical Components
  • Fuse Holder
  • Fuse
  • Bulldog Winch
  • 400 Amp
  • 0-4 Gauge Wire

This 400-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.


Features:

  • 400-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating
    • Connect between your winch motor and your vehicle battery's positive lead
  • Fuse blows when it detects excessive current pull from winch motor
    • Stops flow of power from vehicle's battery
    • Requires replacement if blown
  • Window on fuse housing provides visible indication of connector blade separation
  • ANL fuse handles higher amperage when compared with many other fuse types
  • Fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck
    • Compatible with 0- to 4-gauge wires
  • Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included)
    • Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws
    • 5-mm Hex key (sold separately) required to tighten set screws


Specs:

  • Qty: 1 fuse
  • Fuse length: 3-1/8"
  • Fuse width: 5/8"
  • Distance between mounting points (center to center): 2-3/8"
  • Distance from side to center of mounting point: 3/8"
  • Mounting slot opening: 3/16"


BDW20354 Bulldog Winch ANL Fuse Holder for 300A - 400A Fuses - 0- to 4-Gauge Wire - Off-Road Winches

BDW20357 Bulldog Winch ANL 400A Fuse for Off-Road Winches




California residents: click here


Video of ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bulldog Winch Electric Winch BDW203547 Review

Speaker 1: Today, we're going to take a look at ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches. This is going to work for zero to four gauge wire. The thing that I really like about this fuse holder is that it's going to be a clear construction so it's going to give you that visible indicator of whether or not that fuse is blown. This is going to be, again, and ANL-type fuse which just means that it handles higher amperage when compared to other types of fuses, and you'll see in the center, there's that little window there that gives us the indicator of whether or not that fuse is blown.Our fuse acts as the connection point between our Bulldog Winch motor and the vehicle battery, so if there we're to be too much current pulled from the winch motor, this fuse is going to blow, and that's going to prevent your winch from overheating and possibly causing any damage to the motor there. Of course, once that is blown, it will need to be replaced. You can pick up other 400 Amp fuses here at etrailer.com if that we're to happen.This fuse holder also lets you permanently mount your fuse next to the vehicle's battery, so if you're using this on a Jeep or a truck, it's going to be a really handy tool to keep that fuse protected and mounted.

And the way that we're going to attach that is by putting one end of our fuse underneath the bolt and washer on that metal end. It's going to be the side with that half-moon shape and the bolt on top. You want to make sure that it goes underneath the washer as well so it gets a good hold, and then tighten it down with a five millimeter hex key. This does not come with a hex key so you will have to provide it on your own, and it doesn't need to be super-tight. You don't have to really grip that down or anything.

It just needs to be snug enough so it's not going to move around or come undone, especially as you're going off-road and bumping this around on the road.You can slide that in. Make sure it goes, again, underneath the washer and nut, and then you would unthread this and tighten down that other nut. You'll notice that there is a gasket on either end of our fuse holder, as well as the end of the cap. That's to allow our wire to go into the fuse holder, but also prevent any dust or debris from getting in there and causing any damage to our connection. The other end of that metal holder there is where our wire is going to be attached.

That also uses the five millimeter hex key, and if we back that bolt back out, you can see that there's a space that opens up. You put your wire in there. Of course, you want to make sure that it's stripped back about a half-inch. And then, you can tighten that bolt down, and that's just going to pinch the wire and hold it into place. Then, you can reinstall the cap.You want to make sure that you have the wires running through either end of those caps or the caps on either end to make sure that it's not going to interfere with putting those back in place, so you'll want to have those in there before you get everything tightened down.

That's what it should look like once we have our fuse in place. You can see through the clear housing that window in our fuse is still very visible. So, it just makes it a nice, easy way to see whether or not that fuse is blown without having to take everything apart.As far as the dimensions, the fuse holder is going to be about 5 1/2 inches long by about 1 1/2 inches in diameter. The mounting bracket that is attached to the fuse holder, that's going to be about 2 1/2 inches wide. The mounting holes themselves will be two inches center on center in either direction.And that's going to do it for our look at the ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches.


Customer Reviews

ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire - BDW203547

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

This 400-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.

- BDW203547
by:


1
1

Ask the Experts about this Bulldog Winch Accessories and Parts

  • Inline Fuse for Bulldog # BDW15019 Winch Connected with Bulldog # BDW20026 Wiring Kit
    The Bulldog # BDW15019 winch has a maximum operating DC Amperage of 340 Amps. The Bulldog # BDW20026 Wiring Kit has 3 gauge wire. You will need a Bulldog # BDW203547 – 400 Amp inline fuse which is designed for 0 to 4 gauge wiring. This fuse will blow before your wiring is damaged. The battery cable is connected to the fuse holder with a M5 hex key. If you do not have one you can order the Thule # 853-0930 replacement hex key. I have included links to all of these products plus links...
    view full answer...
  • What Size Fuse Does a 10,000 Lb Electric Truck Winch Use
    I would love to help but not all 10,000 lb electric winches will use the same size fuse or circuit breaker. The correct size fuse/circuit breaker that is needed will be determined by the manufacturer. For example, the Bulldog Winch Integrated Off-Road Winch part # BDW10005 that we offer which has a 10,000 lb rating uses a 400 amp fuse, the ANL Fuse Holder and 400 Amp Fuse for Bulldog Winch Off-Road Winches part # BDW203547 in particular. We also have wiring kits for these winches as well,...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Kathleen M
Installed by:
Kathleen M
Employee Matthew S
Written by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.