ANL 400 Amp Fuse for Bulldog Winch Off-Road Winches - Qty 1

Video Transcript for Bulldog Winch Electric Winch BDW20357 Review

Speaker 1: Today we're gonna take a look at the 300 amp fuse for Bulldog Winch off road winches. And this fuse is going to serve as the electrical connection between your vehicle's battery and your electric motor on your Bulldog Winch.So if this fuse detects too much current pull coming from your winch, it's going to sever that connection between the battery and the motor and prevent any overheating happening with your Bulldog Winch motor.You'll see the little window on the front of this fuse, that's going to be where we can see the connector blades and if those are separated that's when we'll know that the fuse has blown and we need to replace it.That it's been an ANL fuse just means that it's going to handle higher amperage when compared to other types of fuses. There is also a fuse holder available from Bulldog Winch. You can find that here at etrailer.com and that just gives you a permanent mounting solution to get this fuse on your vehicle, next to the batteries on your jeep or truck or wherever you have that electric winch mounted.Again the fuse holder is sold separately and you can find it here at etrailer.com. As far as the dimensions with this fuse, it's going to be about three inches long by about three quarters of an inch wide by about half an inch thick. And that's gonna do it for a look at the ANL 300 amp fuse for Bulldog Winch off road winches..