bing tracking image
  1. Accessories and Parts
  2. Bulldog Winch
  3. Electric Winch
  4. Electrical Components
  5. Fuse Holder
  6. Fuse
ANL Fuse Holder and 350 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire

ANL Fuse Holder and 350 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire

Item # BDW203546
lowest price pledge
Our Price: $27.98
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.54 lbs
Quantity: 
In Stock
Bulldog Winch Accessories and Parts - BDW203546
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
This 350-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires. 1-800-940-8924 to order Bulldog Winch accessories and parts part number BDW203546 or order online at etrailer.com. Free expert support on all Bulldog Winch products. Guaranteed Lowest Price and Fastest Shipping for ANL Fuse Holder and 350 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (2)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Bulldog Winch Accessories and Parts - BDW203546

  • Electric Winch
  • Electrical Components
  • Fuse Holder
  • Fuse
  • Bulldog Winch
  • 350 Amp
  • 0-4 Gauge Wire

This 350-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.


Features:

  • 350-Amp fuse helps prevent your Bulldog Winch off-road winch from overheating
    • Connect between your winch motor and your vehicle battery's positive lead
  • Fuse blows when it detects excessive current pull from winch motor
    • Stops flow of power from vehicle's battery
    • Requires replacement if blown
  • Window on fuse housing provides visible indication of connector blade separation
  • ANL fuse handles higher amperage when compared with many other fuse types
  • Fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck
    • Compatible with 0- to 4-gauge wires
  • Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included)
    • Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws
    • 5-mm Hex key (sold separately) required to tighten set screws


Specs:

  • Qty: 1 fuse
  • Fuse length: 3-1/8"
  • Fuse width: 5/8"
  • Distance between mounting points (center to center): 2-3/8"
  • Distance from side to center of mounting point: 3/8"
  • Mounting slot opening: 3/16"


BDW20354 Bulldog Winch ANL Fuse Holder for 300A - 400A Fuses - 0- to 4-Gauge Wire - Off-Road Winches

BDW20356 Bulldog Winch ANL 350A Fuse for Off-Road Winches




California residents: click here


Video of ANL Fuse Holder and 350 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bulldog Winch Electric Winch BDW203546 Review

Speaker 1: Today we're going to be taking a look at the ANL fuse holder and 350 amp fuse for Bulldog Winch Off-Road Winches. This is going to work for zero to four gauge wire. This fuse holder allows you to have a great option for mounting of your fuse in your truck or jeep or wherever you have your off-road winch mounted. It's also going with that 350 amp fuse to get that connected and make sure that you have the power that you need and also the protection that you need. The 350 amp fuse is going to prevent your Bulldog winch from overheating, since this is going to connect between your motor and your vehicle's positive battery lead.So if this detects excessive current pull from your winch motor, it's going to stop that flow of power from the vehicle's battery and prevent any damage to either. Of course, once that happens, the filament there, the connector blade will separate and that'll indicate that it needs to be changed out since it is blown.

The nice thing about this fuse is that it has that little window so you can tell once it's blown and it needs to be replaced. That's also a nice thing about our fuse holder itself is that it is clear, so once this is blown inside the fuse, the holder will be able to tell without having to open it up and check it out. You can see it immediately just by looking at it.Now, to get that fuse in place, you'll just need to unthread one of the ends and then slide one end of the fuse underneath that bolt and washer. Tighten it down using a five millimeter hex key. Now the hex key is not included with this, so you will have to pick one up on your own.

The other end just needs to slide in and underneath that other bolt there and you tighten that one down to make sure that it's secure. It doesn't have to be like super, like really gripped tight. You just want it to be snug enough that it's not going to move around, especially as you're going off-road.You don't want to get where you're going, you need to winch out of a situation and not have power because you're connection has fallen out. Now these little grommets are going to prevent any dirt or debris from getting in there and damaging your connection or causing any intermittent power again. There's the grommet on the end as well as one inside the threads there.

So it's just going to provide you a little bit of extra protection from the elements. Now, on the inside as well, on that metal portion, we are going to have the set screw to get our wire in place. That also tightens and loosens, using that five millimeter hex key.So you see as we run that bolt out, it opens up to allow that wire to slide in there and then we can tighten that set screw back down and that's going to pinch the wire in place to keep it secure and complete the connection. So when you're installing this, you'll probably want to have that wire run through the end cap before you get that in place on the end of the fuse holder, so that you don't have to undo any connections to get that cap back on. Again, this is going to be compatible with zero to four gauge wire.

You'll just want to strip back the ends, of course, before you get that in place so that there's no insulation causing any interference with your connection.The overall measurement on this fuse holder is going to be about five and a half inches and it's going to be about one and a half inch in diameter. The mounting holes are going to be about two inches apart, center on center. That mounting flange is going to be about two and a half inches in total. The mounting holes are going to be about two inches apart, center on center, in both directions. So that's going to do it for our look at the ANL fuse holder and 350 amp fuse for Bulldog Winch Off-Road Winches.


Customer Reviews

ANL Fuse Holder and 350 Amp Fuse for Bulldog Winch Off-Road Winches - 0 to 4 Gauge Wire - BDW203546

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

This 350-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.

by:

High quality



by:


2
2

Ask the Experts about this Bulldog Winch Accessories and Parts




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Kathleen M
Installed by:
Kathleen M
Employee Matthew S
Written by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.