Ever been trapped by your own gear? You roll up to camp ready to relax with a cold beverage, but your bike rack stands between you and a cooler full of well-earned drinks. The Swagman Swivel allows you to open up the rear without unloading your gear.Because the only thing that should be flying around your car is good road trip music, not your kid's sleeping bag. Specs Hitch Compatibility: Receiver Size: Fits 2" x 2" trailer hitch receivers Weight & Capacity: Maximum Load Capacity: Supports up to 300 lbs Product Weight: 47 lbs total weight Finish: Color: Black Note: Be sure to confirm hitch compatibility and weight limits before installation.
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Constructed of durable steel Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum gross trailer weight : 10,000 lbs Maximum tongue weight : 500 lbs Distance from center of hitch pin hole to center of hitch pin hole: 14" Limited lifetime warranty Please Note: Using this extension will reduce your hitch's weight capacity by 50 percent.
Extend your trailer hitch receiver opening without increasing the vibration in the receiver tube. This 8" adapter has a built-in 3-axis anti-wobble system to provide maximum anti-rattle protection. ... Features: Adapter with 3-axis anti-wobble system extends trailer hitch receiver opening 8" away from the rear of your vehicle Ideal for vehicles with spare tires, recessed hitches, van doors, or tailgates Mount a bike rack without removing your spare or create extra clearance for your trailer Locking hitch pin and anti-wobble bolt secure extension to your vehicle Insert pin from the passenger's side Tighten down the pin to engage the 3-axis anti-wobble system inside the shank Steel shank with black powder coat is durable and rust-resistant Hitchextender, hitch pin, hitch lock, and keys included Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Weight capacity: Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall length: 13" Distance from center of hitch pin hole to center of hitch pin hole: 8" Distance from the center of the hitch pin hole to the end of the shank: 2-1/2" Distance from the center of the hitch pin hole to the weld of the receiver tube: 4" Limited lifetime warranty Notes: Using a hitchextender will reduce your hitch's overall capacity by 50% 3 Bike max (tongue weight reduces exponentially the farther from the hitch, do no load 4 bikes)
Extender pairs with your Brophy hitch stairs (RHS2) so that you can step into your truck bed when the tailgate is down. Just insert into your 2" trailer hitch receiver and get an extra 19" of extension when the steps are mounted.Features: Hitchextenderextends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Lets you use your Brophy hitch stairs (RHS2 - sold separately) when your tailgate is down 2 Pins and clips included to secure stairs to extenderHitch pin and clip or hitch lock for securing extender in vehicle's hitch sold separately Black powder coated steel resists rust and corrosion Matches the look and construction of your Brophy hitch stairs Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Overall extension: 19" Distance from vehicle's trailer hitch to back of top step: When positioning stair using pin hole closest to the steps: 19-1/2" When positioning stair using middle pin hole: 22-1/2" When positioning stair using pin hole furthest from the steps: 25-1/2" Weight capacity: 250 lbs
This extension adds 8" of clearance to your hitch so you can mount an accessory without worrying about vehicle contact. Includes anti-wobble bolt and locking hitch pin. Great for vehicles with spare tires, recessed hitches, or van doors.Features: Adapter extends trailer hitch receiver opening 8" away from the rear of your vehicle Ideal for vehicles with spare tires, recessed hitches, van doors, or tailgates Mount a bike rack without removing your spare or create extra clearance for your trailer Threaded insert tube and anti-rattle hitch pin reduce movement in the hitch receiver Removes more play and rattle than hitchextenders with standard hitch pin holes Steel shank with black powder coat is durable and rust-resistant Hitchextender, hitch pin, hitch lock, and keys included Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Weight capacity: Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall length: 13" Distance from center of hitch pin hole to center of hitch pin hole: 8" Distance from the center of the hitch pin hole to the end of the shank: 2-1/2" Distance from the center of the hitch pin hole to the weld of the receiver tube: 4" Receiver depth: 3-1/2" Limited lifetime warranty Notes: Using a hitchextender will reduce your hitch's overall capacity by 50% 3 Bike max (tongue weight reduces exponentially the farther from the hitch, do no load 4 bikes)
Adapter lets you use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch and extend your trailer hitch receiver opening with the same piece. ... Features: Lets you use 2" hitch-mounted accessories in your 2-1/2" trailer hitch Slides into trailer hitch receiver to reduce size from 2-1/2" x 2-1/2" to 2" x 2" Extends trailer hitch receiver opening 7" out from the rear of your vehicle to avoid obstacles Get extra clearance for your hitch-mounted accessories, such as bike racks or cargo carriers Durable steel with matte black powder finish and e-coat that resists corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum tongue weight: 350 lbs Overall length: 12" Distance between hitch pin holes (center to center): 7" Distance from receiver end to center of nearest pin hole: 2-1/2" Distance from accessory end to center of nearest pin hole: 2-1/2" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent.
Hey Garret, I would definitely go with what Equal-I-zer recommended with the part #EQ37120ET which would be the correct rated system for your 2019 Heritage Glen 282RK. You are correct in that if you go with a system that is rated too high you will…
Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…
Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…
Hey Terry, you’re likely not doing anything wrong. The Force #PA96VR has wide 6-1/2” tires that give great traction, but they don’t pivot sharply. For tight angle turns, it helps to alternate between forward and reverse, “walking” the tongue in…
Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…
From the center of the hitch pin hole to the handle of the Yakima FullSwing #Y02465 is 6". Since the handle is making contact with the spare tire on your 2018 Jeep JL Wrangler Unlimited Sahara it sounds like a better option would be to use the…
Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…
Hey Jeff, The Roadmaster Direct-Connect base plates #RM87NQ for your 2025 Ford Maverick are not compatible with that Demco tow bar, and there are no adapters out there that will make them work. What you could do if you are wanting to use that tow bar…
Hey John, The Gen-Y Hitch Receiver Hitch Extender for 2" Trailer Hitches #GY89SR would reduce both the tongue weight and gross towing weight capacity of the motorhome's trailer hitch by 50% to 5k towing/500lb TW, leaving you unable to tow…
Hello Robert. For flat towing your new 2024 Ford maverick Hybrid I recommend the Roadmaster Direct-Connect Base Plate Kit #RM97RR. Most of the Maverick base plates will install fairly similarly, and you will be fully removing the front bumper for…
Hey Daniel. To convert your surge brake trailer over to electric over hydraulic system you'll need the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes item #HS481-8067. The Hydrastar item #HS481-8067 works with factory…
Hey Ahmed. I've got a few options for extenders that will work with your Ram truck depending on what kind of hitch you have. If your 2014 Ram 2500 has a 2-1/2" hitch receiver, I recommend the Curt Hitch Extension and Reducer for 2-1/2"…
Extend your trailer hitch receiver opening to clear your spare tire when using your hitch-mounted bike rack. Prevents your trailer from hitting a rear-mounted propane tank when making sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Mount your bike rack without having to remove your rear-mounted spare tire Durable steel with matte black powder finish and e-coat that resists corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitch receivers Maximum gross trailer weight: 3,500 lbs Maximum tongue weight: 350 lbs Overall length: 23-11/16" Distance between hitch pin holes (center to center): 18" Distance from receiver end to center of nearest pin hole: 3" Distance from accessory end to center of nearest pin hole: 2-1/2" Limited lifetime warranty Note: Using a hitchextender will reduce your hitch's overall capacity by 50%.
Extend your trailer hitch receiver opening to clear your spare tire when using your hitch-mounted bike rack. Prevents your trailer from hitting a rear-mounted propane tank when making sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Durable steel with matte black powder finish and e-coat that resists corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall length: 12-1/2" Distance between hitch pin holes (center to center): 8" Distance from receiver end to center of nearest pin hole: 2" Distance from accessory end to center of nearest pin hole: 2-1/2" Inner distance from center of hitch pin hole to solid receiver end: 3-3/4" Limited lifetime warranty Note: Using a hitchextender will reduce your hitch's overall capacity by 50 percent.
Extend your trailer hitch receiver opening to clear your spare tire when using your hitch-mounted bike rack. Prevents your trailer from hitting a rear-mounted propane tank when making sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Mount your bike rack without having to remove your rear-mounted spare tire Durable steel with matte black powder finish and e-coat that resists corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall length: 19-1/2" Distance between hitch pin holes (center to center): 13-13/16" Distance from receiver end to center of nearest pin hole: 3" Distance from accessory end to center of nearest pin hole: 2-5/8" Limited lifetime warranty Note: Using this extension will reduce your hitch's weight capacity by 50 percent.
Extend your trailer hitch receiver opening to clear your spare tire when using your hitch-mounted bike rack. Prevents your trailer from hitting a rear-mounted propane tank when making sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Mount your bike rack without having to remove your rear-mounted spare tire Durable steel with matte black powder finish and e-coat that resists corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Tongue weight: 350 lbs Overall length: 10-1/2" Distance between hitch pin holes (center to center): 7" Distance from receiver end to center of nearest pin hole: 1-1/2" Distance from accessory end to center of nearest pin hole: 2" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent.
Use your 2" hitch-mounted accessories with your 2-1/2" x 2-1/2" trailer hitch and extend your trailer hitch receiver opening with the same piece. ... The center of the hitch ball should extend no further than 8" from the end of the hitchextender.
This hitchextender converts your Saris bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. ... Features: Turn your favorite Saris hitch rack into a swing away Pivots 90 degrees for full hatch access and locks in open position Compatible with bikes up to 35 lbs per bike tray for the following models: SuperClamp EX 2-Bike (4025F), SuperClamp HD 2-Bike (4025HD), Freedom EX 2-Bike (4412F), Freedom 2-Bike (4412B), and Glide EX 4-Bike (774) Compatible with bikes up to 60 lbs per bike tray for the following models: MTR 1-Bike (4031) and MTR 2-Bike (4032) Tilting/folding feature of Freedom, SuperClamp, or MTR racks can be used when on the Swing Away Accessory in the "closed" position Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extendersHitch Tightener system securely locks hitch into place, securing the base to your vehicle 2 Integrated carrying handles included Specs: Application: 2" hitch receivers Weight capacity: 250 lbs (rack plus bikes) Note: Using this hitchextender will reduce your hitch's overall capacity by 50 percent
This hitchextender converts your existing bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. ... This swing-away hitchextender is also compatible with other 2" hitch accessories, like cargo carriers and grills. The BackSwing installs in your 2" hitch with the included anti-rattle hitch pin, and a SKS hitch lock deters theft of the extender.
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Hollow steel shank Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall length: 12-1/2" Distance from center of hitch pin hole to center of hitch pin hole: 8" Distance from the center of the hitch pin hole to the end of the shank: 2" Distance from the center of the hitch pin hole to the weld of the receiver tube: 3" 1-Year limited warranty Note: Using a hitchextender will reduce your hitch's overall capacity by 50 percent.
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. ... Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Solid steel shank Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Overall length: 12" Distance from center of hitch pin hole to center of hitch pin hole: 8" Distance from the center of the hitch pin hole to the end of the shank: 2" Distance from the center of the hitch pin hole to the weld of the receiver tube: 3" 1-Year limited warranty Note: Using a hitchextender will reduce your hitch's overall capacity by 25 percent.
7" Trailer HitchExtenderHas powder coated black finish resists rust and corrosion. Specs: Designed for 2" x 2" trailer hitches Measures 7-3/8" from the center of the hitch pin hole to the center of the hitch pin hole of the extension piece Measures 11-5/8" long (overall) Measures 2-1/2" from end of shank (that slides into hitch on vehicle) to center of hitch pin hole Measures 2-1/8" from center of hitch pin hole to the 2" x 2" opening (for accessory) Has weight capacity that is the lowest of the following 50% of the hitch's overall weight capacity Load rating GTW 3,500 lbs; Tongue 350 lbs Load rating with weight distribution equipment GTW 7000 lbs; Tongue 700 lbs Please Note: Using a hitchextender will reduce your hitch's overall capacity by 50%.
Versatile hitchextender transforms your hitch into a modular system for hauling all your gear. Compatible with EXO accessories to customize your setup. ... Features: Pivoting hitchextender transforms your hitch into a modular system for hauling all your gear Mix-and-match accessories (sold separately) for cycling, camping, skiing, or hiking Available TopShelf (sold separately) creates a second level for an additional accessory Dual-arms feature a cleat system and locking SpeedKnobs for easy accessory attachment Fold in when not in use Swing-away design pivots base 90 degrees while fully loaded for cargo area access 2 Extra Same Key System (SKS) lock cores included for securing gear to an accessory Simple bolt-on attachment to your vehicle's hitch receiver Included HitchLock deters theft of the base Durable steel construction with black powder coat is rust resistant Signature bottle opener built-into base arms let you enjoy a cold one Specs: Application: 2" x 2" hitch receivers Weight capacity: varies based on mounted accessory Dimensions: 34" long x 49" wide x 9-1/2" tall Distance from center of hitch pin hole to: Closest part of rack: 4-1/4" Farthest part of rack: 35-1/2" Weight: 64 lbs Limited lifetime warranty
This heavy-duty device extends your hitch accessory 5-3/4", 8-1/4" or 8-1/2", or 11" out from the hitch. It fits 2" hitches and includes an anti-rattle bolt.This extender cannot be used to tow a trailer. 6000 Advantage Sports Rack Hitch Extension by Heininger Holdings
This two-tier hitchextender is the backbone of the Yakima EXO modular gear-hauling system. It lets you mix-and-match accessories for cycling, camping, and skiing. ... Features: Hitchextender transforms your hitch into a two-tier modular system for hauling all your gear EXO accessories (sold separately) adapt your setup for biking, skiing, and camping System swings away from vehicle while fully loaded for cargo area access Top level rotates 180-degrees back, providing access to gear on lower level Included jack stand supports the weight of the extended rack and accessories Cleat system and SpeedKnobs allow accessories to be added and removed without tools Same Key System (SKS) locks deter theft of system, accessories, and gear Cores can be swapped out to match your other Yakima accessories Anti-rattle hitch pin reduces movement of rack in hitch receiver Durable steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" hitch receivers Dimensions: 31" long x 25" wide x 26-1/2" tall Distance from center of hitch pin hole to: Closest part of rack: 4-1/4" Farthest part of rack: 35-1/2" Total system weight: 101 lbs Limited lifetime warranty Notes: The EXO System is only approved for use with the Yakima StraightShot 2" hitchextender (Y69VR - sold separately).
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. ... Using a 1-1/4" extender will reduce your hitch's overall capacity by 50 percent.
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. ... Using a hitchextender will reduce your hitch's overall capacity by 1/3.
Extend your trailer hitch receiver opening and add a sturdy step to the rear of your vehicle at the same time. This extension lets you mount a bike rack without having to remove your spare tire, and it gives your trailer more clearance during turns.Features: Extends your trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Allows for extra clearance for your trailer Allows you to mount your bike rack or other accessory without having to remove a rear-mounted spare tire Provides a sturdy step at the rear of your vehicle Makes it easy to climb in and out of your truck bed or cargo area Lets you avoid climbing on your trailer frame to access your equipment Constructed of durable carbon steel Collar constructed of sturdy cast steel Solid shank for added durability and strength Resists rust and corrosion with black powder coat finish Specs: Application: 2" x 2" trailer hitch receivers Step dimensions: 17" long x 6-1/4" wide Overall length: 17-1/8" Distance from center of hitch pin hole to center of hitch pin hole: 12" Note: Using a hitchextender will reduce your hitch's overall weight capacity by one third.
Designed for use with tow bars, this hitchextender moves your 2" receiver opening 7-3/4" out from your trailer hitch to provide clearance for rear-mounted accessories. ... Features: Extends trailer hitch receiver opening out from the rear of your motorhome to avoid obstacles Get extra clearance for your coach Constructed of durable steel Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2" x 2" hitch receivers Maximum gross trailer weight : 6,000 lbs Maximum tongue weight : 200 lbs Overall length: 12-1/4" Distance from center of hitch pin hole: 7-3/4" to center of hitch pin hole 2" to the end of the shank 2-3/4" to the opening of the receiver 2-5/8" to the weld of the receiver tube Distance from the weld of the receiver tube to the receiver hitch pin hole: 5" Limited Lifetime Warranty Note: This hitchextender is designed for using hitch-mounted accessories or for flat-towing only.
Extend your trailer hitch receiver opening and add a sturdy step to the rear of your vehicle at the same time. This extension lets you mount a bike rack without having to remove your spare tire, and it gives your trailer more clearance during turns.Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Provides sturdy step at rear of vehicle Get into and out of truck bed or cargo area with ease Access your boat or equipment without having to climb all over your trailer frame Shank is a solid steel construction Resists corrosion with black powder coat finish Requires hitch pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Hitch receiver size: 2" x 2" Gross towing weight: 3,500 lbs Towing weight with weight distribution: 7,000 lbs Tongue weight: 350 lbs Tongue weight with weight distribution: 700 lbs Overall length: 19" Distance from center of hitch pin hole to front of the receiver opening: 16-1/2" Distance between center of pin hole to center of pin hole: 14" Step platform dimensions: 17" wide x 6-1/2" deep Note: Using this hitch extension will reduce your hitch's weight capacity by one third.
Filters
