Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
In order to haul your gooseneck trailer with a fleet of semi-tractors you will need to make your own adapter harness which will then make for a plug and play connection but they don't make anything pre-assembled for this out of the box to my…
view full answer...A gooseneck trailer, or in this case a converted 5th wheel trailer using Ranch Hitch, #AM3139, will still need safety chains as if required by law in the states you will be traveling. You will need to check with the Department of Transportation for…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I looked up the Big Tex 22GN Gooseneck trailer and see that it has a square tube coupler. We do have an adapter, inner tube only, for square tubes, #BD0289650300. The tube is 4 inches wide on the outside. It uses holes for pins or bolts though so if…
view full answer...The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
view full answer...It would take a very custom install that would require a qualified fabricator to come up with a way to attach the rails to the frame of your truck. Typically for flat bed trucks we recommend the Reese Low Profile Fifth Wheel Hitch part #RP30054 that…
view full answer...The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR weighs 120 lbs. I have attached a schematic below. This adapter is designed to replace the Lippert Rhino 5th-wheel pin boxes. If you do not have a Rhino pin box you won't be able to use…
view full answer...Thanks for reaching out, Matthew. Your description of the gooseneck ball does make sense. I cannot say I am familiar with the Una-Goose brand though, but I am familiar with the different gooseneck balls and their release mechanisms. The Demco 8550052…
view full answer...The Hayes Air Utility Brake Control #HA100400C, which you reference, is designed for towing vehicles that have air brakes and trailers that have electric brakes. If you want to convert your trailer's air brakes to electric brakes you will want to…
view full answer...Yes, it is possible. To get started you will need a hub and drum that matches the bearing and seal on your trailer spindle and your wheel bolt pattern. Confirm this by checking the bearing part number, and seal part number. Next, you will need left…
view full answer...The wiring on a semi is not normally the same as a standard RV or Gooseneck trailer. You will need to use a couple different harnesses to get what you are looking for. I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat…
view full answer...I do have options for you but if you were using the lower most hole on the hitch ball for the Andersen Ultimate Connection 5th Wheel Trailer Hitch part #AM3200 then that is going to be your max height for this hitch as they do not make a taller ball…
view full answer...Filters
2643 results
Vehicle Fit
Fit 1998 Dodge Durango