Checking Out the Gooseneck to 5th Wheel Trailer Coupler Adapter Video

The Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Round - 25K lbs Item #KPG5-R25-IP is designed as an adapter for goose neck trailers with a 4" round tube. As long as your Big Tex trailer has a 4" round tube this adapter is…

The overall length of the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 30K item #KPG5-R30IP is 29". It is 14" from the top of the tube to the first adjustment hole. I have attached a diagram detailing these measurements.

Hello John, The Curt Ball and Safety Chain Loop Kit for GM/Chevy/Ford/Nissan Underbed Gooseneck Trailer Hitch - 30K #C60692 is the correct gooseneck hitch kit for your 2024 Ford F350 with OEM Prep Package. The part number that you mentioned…

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

All of the gooseneck hitches that fit 5th wheel rails are going to be roughly the same height and won't lower the trailer enough to tow it level. But there is an alternative. You may be able to use an over/under conversion kit or otherwise raise…

Yes, we do have the parts you need to convert your Big Tex trailer over to a 5th wheel hitch. You will want the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter item #KPG5-R30IP. It has a 30,000 lbs capacity. The Ram Adapter item #KPG5-R30IP…

A 7-pin connector on a Mack Tractor like you described would function a bit differently than a 7-way blade-style RV connector. The difference is the right and left turn pins on the 7-way blade also carry the signal for the brake lamps while on the…

I do not recommend using a leaf spring spacer (lift block) on your trailer. The reason for this is because they can cause the trailer to become extremely bouncy and rough which is just going to put more stress on your suspension and wear out the…

The only option we would have would be to install taller suspension hangers on your trailer. You would first need to measure the height of your current hangers and then check out the link I attached which has all the hangers we carry. You will then…

In order to adjust the hitch head height of the B&W Companion OEM 5th Wheel Trailer Hitch part #BWRVK3670 you will need to remove the pivot arms and then reinstalled them using either the top, middle, or bottom set of bolt holes. I have attached…

Typically a Dexter 7k axle will have a diameter of 3 inches and an 8k axle will have a diameter of 3-1/2 inches. The thicker the axle the more weight it can handle. There really isn't an advantage to going with higher capacity leaf springs than…

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…