Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
In order to carry the 3200-Watt Portable RV Inverter Generator w/ Cover #333-0003 on the back of your trailer with the 2" receiver you can use the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs #TLA7752.…
view full answer...I would love to help but finding a cargo carrier with everything you need is going to be an extremely difficult task. The main issue is going to be size/weight. Most cargo carriers that can accommodate the 27.6" depth of your generator are not…
view full answer...Unfortunately, you wouldn't be able to use a dual hitch adapter like #D-192 for that, as having one accessory installed would prevent you from installing one in the other receiver. They just wouldn't fit. We do have the perfect solution for…
view full answer...The 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752 that you referenced is rated for the rougher ride quality that is present at the rear of travel trailers like yours which is a bit rougher like you noticed. I attached a picture of…
view full answer...Hey Jan, to locate the Torklift Generator carrier part #TLA7752 off-center in front of only one of the doors would require finding a welder/fabricator in your area who could add an additional hitch opening off to the side. This is such a rare request…
view full answer...When using a hitch extender like the Malone 2" Dual Purpose Hitch Receiver #MPG544 there's two things you need to keep in mind. One is that they cut the capacity of the hitch they are used in by 50 percent and also this has it's own 400…
view full answer...For your 2023 GMC Sierra 1500, I recommend the Air Lift LoadLifter 5000 item #AL57388 over the item #AL88388. Both of these systems are confirmed to fit the AT4 4WD models. They each have a 5,000 lbs capacity that will both support your rear end and…
view full answer...I check with the manufacturer and they told me that yes the hitch shank on the Pro Series Solo Cargo Carrier #PS1040100, can be flipped either way to help with clearance when opening the cargo area door on your 2003 Ford Explorer. You will just need…
view full answer...As long as the base of the fridge you're needing to transport can fit in the 32x48 area of the Reese Solo Cargo Carrier #PS1040100, and it doesn't weight more than 400 lbs then you'll be good to go! Fridges come in all sorts of shapes and…
view full answer...The Pro Series Cargo Carrier you mentioned, part #PS1040100 offers 12 inches of clearance between the pin hole and closest portion of the basket portion of the carrier. The distance between the hitch pin hole and the bend in the shank is 5 inches,…
view full answer...Are the threads of the main screw turning while the nut is being turned? If so and the jack isn't moving it could be that the barrel nut on the opposite end of the scissor jack has become stripped and now does not allow the jack to raise or…
view full answer...The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
view full answer...Filter Your Search
Contact and Help