Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Thanks for the picture Chris! The lift-brackets mount about 29" back from the center of the coupler on the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW0553. It looks like your trailer's tongue isn't going to have…
view full answer...There are 3 different bolt sizes that come with the Blue Ox Signature Series Lift Brackets #BXW4021 for mounting.The ones that you use will depend on the size of your trailer frame. There are 4 bolts for all 3 following sizes: 1/2" x 13 x…
view full answer...Hey Steve thanks for coming by! This vehicle is still pretty new, so there actually isn't a wiring harness or braking system ready just yet. There is a base plate though, the Roadmaster Direct-Connect Base Plate Kit #RM23DQ, which you could use…
view full answer...Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…
view full answer...We have everything you need to flat tow your 2007 Chevy HHR. The first thing you'll need is a base plate kit. This is what provides the connection point for the tow bar to the vehicle frame. For that we have the Roadmaster kit part #3141-1 which…
view full answer...The overall dimensions of the Blue Ox Signature Series Lift Brackets #BXW4021 are 12" wide x 7-3/4" tall as you can see in the attached photo.
view full answer...In order to find out which hub and drum assembly fits your 3,500 lb axle on your Cargo Craft trailer you will need to know which bearings are on your axle. If you have a serial number on the axle you can probably get this information from the…
view full answer...You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease #LM54FR in a grease gun, such as #L30480, will work well. You could use…
view full answer...Hey Ron! It sounds like you need the Replacement Storage Pin for Demco and etrailer Tow Bars item #DM23VR. This works with all of the etrailer XHD Non-Binding Tow Bars like item #e94ZR. I attached a picture below where I circled the pin which item…
view full answer...The first thing you need to flat tow your 2012 Fiat 500 Pop with a manual transmission is a base plate kit. For that I recommend the Blue Ox part #BX2801 that fits your vehicle as the Blue Ox base plate kits are the easiest to use and are really well…
view full answer...The Blue Ox base plates between the 2013 and 2017 Fiat 500 models are the same as long as you have the same sub model for the vehicle. It looks like the mounting locations are the same for the products but the difference is where the tabs are located…
view full answer...There are quite a few Blue Ox base plate options for your 2013 Fiat 500, but the correct one is dependent on the model of your vehicle, but all of them require your 500 to have the manual transmission as the owner's manual for your vehicle says…
view full answer...